XBUR53D

Part Number: XBUR53D T-1 3/4 (5mm) BLINKING LED LAMP Features Package Schematics ● 5mm package with built-in blinking IC ● Blinking frequency: 3.0Hz to 1.5Hz ● Operation voltage: 3.5V to 14V ● RoHS compliant. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Red (GaAsP/GaP) Unit Reverse Voltage VR 0.5 V Forward Voltage VF 14 V Power Dissipation PD 310 Operating Temperature TA -40 ~ +70 Tstg -40 ~ +85 Storage Temperature Operating Characteristics (TA=25°C) IF 8 mA mW Forward Current (Typ.) (VF=5V) IF 22 mA °C Supply Current (Typ.) (VF=3.5V) ISON 8 mA ISON 44 mA f 1.5~3 Hz Wavelength of Peak Emission CIE127-2007* (Typ.) λP 627* nm Wavelength of Dominant Emission CIE127-2007* (Typ.) λD 617* nm Spectral Line Full Width At HalfMaximum (Typ.) △λ 45 nm 260°C For 3 Seconds Supply Current (Typ.) (VF=14V ) Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Blink Frequency (Min.~Max.) (VF=3.5V~14V) A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) XBUR53D Emitting Color Red Unit Forward Current (Min.) (VF=3.5V) Lead Solder Temperature [2mm Below Package Base] Part Number Red (GaAsP/GaP) Emitting Material GaAsP/GaP Lens-color Red Diffused Luminous Intensity CIE127-2007* (VF=9V) mcd min. typ. 18 12* 39 24* Wavelength CIE127-2007* nm λP Viewing Angle 2θ 1/2 627* 60° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Jun 22,2016 XDSA2649 V8-X Layout: Maggie L. P. 1/3 Part Number: XBUR53D T-1 3/4 (5mm) BLINKING LED LAMP Red ™ Red Remarks: If special sorting is required (e.g. binning based on Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% Note: Accuracy may depend on the sorting parameters. Jun 22,2016 XDSA2649 V8-X Layout: Maggie L. P. 2/3 Part Number: XBUR53D T-1 3/4 (5mm) BLINKING LED LAMP PACKING & LABEL SPECIFICATIONS XBxx53x TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Jun 22,2016   XDSA2649 V8-X Layout: Maggie L. P. 3/3