XEUY21D

Part Number: XEUY21D 3.65x6.15mm SINGLE CHIP LED LIGHT BAR Package Schematics Features ● Reliable & robust ● Low power consumption ● RoHS compliant ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Absolute Maximum Ratings (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Yellow (GaAsP/GaP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 140 mA Power Dissipation PD 75 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature mW °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Part Number XEUY21D Emitting Color Yellow Emitting Material GaAsP/GaP Operating Characteristics (TA=25°C) Yellow (GaAsP/GaP) Unit Forward Voltage (Typ.) (IF=10mA) VF 1.95 V Forward Voltage (Max.) (IF=10mA) VF 2.4 V Reverse Current (Max.) (VR=5V) IR 10 μA Wavelength of Peak Emission CIE127-2007*(Typ.) (IF=10mA) λP 590* nm Wavelength of Dominant Emission CIE127-2007*(Typ.) (IF=10mA) λD 588* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) △λ 35 nm C 20 pF Capacitance (Typ.) (VF=0V, f=1MHz) Lens-color Yellow Diffused Luminous Intensity CIE127-2007* (IF=10mA) mcd min. typ. 2* 4.8* Wavelength CIE127-2007* nm λP Viewing Angle 2θ 1/2 590* 140° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Nov 30,2018 XDSA1928 V9-Z Layout: Maggie L. P. 1/3 Part Number: XEUY21D 3.65x6.15mm SINGLE CHIP LED LIGHT BAR Yellow Relative Radiant Intensity 100% 80% Ta = 25 °C Ta = 25 °C 15° 0° 1.0 30° 45° 60% 40% 60° 20% 0.5 75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 90° 0° 15° 30° 45° 60° 75° 0.0 90° Spatial Distribution Relative Intensity Vs. CIE Wavelength ™ Yellow Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Nov 30,2018 XDSA1928 V9-Z Layout: Maggie L. P. 2/3 Part Number: XEUY21D 3.65x6.15mm SINGLE CHIP LED LIGHT BAR PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at https://www.SunLEDusa.com/TechnicalNotes.asp Nov 30,2018 XDSA1928 V9-Z Layout: Maggie L. P. 3/3