XLMDKCBD59M

Part Number: XLMDKCBD59M T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Package Schematics Features ● Radial / Through hole package ● Reliable & robust ● Low power consumption ● Available on tape and reel ● RoHS Compliant ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Red (AlGaInP) Blue (InGaN) Unit Reverse Voltage VR 5 5 V Forward Current IF 30 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 185 150 mA Power Dissipation PD 75 120 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature °C Electrostatic Discharge Threshold (HBM) 3000 Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds 250 A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Part Number Emitting Color Red Emitting Material V Operating Characteristics (TA=25°C) Unit VF 1.95 3.3 V Forward Voltage (Max.) (IF=20mA) VF 2.5 4 V Reverse Current (Max.) (VR=5V) IR 10 50 uA Wavelength of Peak Emission CIE127-2007*(Typ.) (IF=20mA) λP 645* 460* nm Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) λD 630* 465* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 28 25 nm C 35 100 pF Capacitance (Typ.) (VF=0V, f=1MHz) Lens-color White Diffused Blue Blue (InGaN) Forward Voltage (Typ.) (IF=20mA) AlGaInP XLMDKCBD59M Red (AlGaInP) InGaN Luminous Intensity CIE127-2007* (IF=20mA) mcd Wavelength CIE127-2007* nm λP min. typ. 600 80* 1195 198* 645* 200 200* 347 347* 460* Viewing Angle 2θ 1/2 30° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Oct 10,2016 XDSB0888 V7-X Layout: Maggie L. P. 1/3 Part Number: XLMDKCBD59M T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Blue Red ™ Red ™ Blue Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Oct 10,2016 XDSB0888 V7-X Layout: Maggie L. P. 2/3 Part Number: XLMDKCBD59M T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Oct 10,2016 XDSB0888 V7-X Layout: Maggie L. P. 3/3