XLUG61D-A

Part Number: XLUG61D-A 1.8mm SOLID STATE LAMP Features Package Schematics ● Radial / Through hole package ● Reliable & robust ● Low power consumption ● Available on tape and reel ● RoHS Compliant Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Green (GaP) Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PD 62.5 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature 140 mA mW °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Part Number XLUG61D-A Emitting Color Green Emitting Material GaP Operating Characteristics (TA=25°C) Green (GaP) Unit Forward Voltage (Typ.) (IF=10mA) VF 2 V Forward Voltage (Max.) (IF=10mA) VF 2.4 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=10mA) λP 565* nm Wavelength of Dominant Emission CIE127-2007* (Typ.) (IF=10mA) λD 568* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) △λ 30 nm C 15 pF Capacitance (Typ.) (VF=0V, f=1MHz) Lens-color Green Diffused Luminous Intensity CIE127-2007* (IF=10mA) mcd min. typ. 6* 11* Wavelength CIE127-2007* Nm λP Viewing Angle 2θ 1/2 565* 70° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Nov 09,2018 XDSB9180 V2-Z Layout: Maggie L. P. 1/3 Part Number: XLUG61D-A 1.8mm SOLID STATE LAMP Green Relative Radiant Intensity 100% 80% Ta = 25 °C Ta = 25 °C 15° 0° 1.0 30° 45° 60% 60° 40% 20% 75° 0% 350 0.5 400 450 500 550 600 Wavelength (nm) 650 700 750 800 90° 0° 15° 30° 45° 60° 75° 0.0 90° Spatial Distribution Relative Intensity Vs. CIE Wavelength ™ Green Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Nov 09,2018 XDSB9180 V2-Z Layout: Maggie L. P. 2/3 Part Number: XLUG61D-A 1.8mm SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at https://www.SunLEDusa.com/TechnicalNotes.asp Nov 09,2018 XDSB9180 V2-Z Layout: Maggie L. P. 3/3