XLUGY37M

Part Number: XLUGY37M T-1 (3mm) SOLID STATE LAMP Features Package Schematics ● Radial / Through hole package ● Reliable & robust ● Low power consumption ● Available on tape and reel ● RoHS Compliant Green Yellow Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Green (GaP) Yellow (GaAsP/ GaP) Unit Operating Characteristics (TA=25°C) Green (GaP) Yellow (GaAsP/ GaP) Unit Forward Current IF 25 30 mA VF 2.2 2.1 V Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Forward Voltage (Typ.) (IF=20mA) iFS 140 140 mA Forward Voltage (Max.) (IF=20mA) VF 2.5 2.5 V Power Dissipation PD 62.5 75 mW Operating Temperature TA -40 ~ +85 Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) λP 565* 590* nm Tstg -40 ~ +85 Wavelength of Dominant Emission CIE127-2007* (Typ.) (IF=20mA) λD 568* 588* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 30 35 nm C 15 20 pF Storage Temperature °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Part Number Emitting Color Green Emitting Material Capacitance (Typ.) (VF=0V, f=1MHz) Lens-color GaP XLUGY37M Luminous Intensity CIE127-2007* (IF=20mA) mcd Wavelength CIE127-2007* nm λP min. typ. 6* 13* 565* 4* 7* 590* White Diffused Yellow GaAsP/GaP Viewing Angle 2θ 1/2 60° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Nov 14,2018 XDSA2569 V11-Z Layout: Maggie L. P. 1/3 Part Number: XLUGY37M T-1 (3mm) SOLID STATE LAMP Green Yellow Relative Radiant Intensity 100% Ta = 25 °C Ta = 25 °C 15° 0° 1.0 30° 80% 45° 60% 60° 40% 20% 0.5 75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 90° Relative Intensity Vs. CIE Wavelength 0° 15° 30° 45° 60° 75° 0.0 90° Spatial Distribution ™ Green ™ Yellow Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Nov 14,2018 XDSA2569 V11-Z Layout: Maggie L. P. 2/3 Part Number: XLUGY37M T-1 (3mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at https://www.SunLEDusa.com/TechnicalNotes.asp Nov 14,2018   XDSA2569 V11-Z Layout: Maggie L. P. 3/3