XRS2LUR11D

Part Number: XRS2LUR11D 3mm Two Position SMD CBI Housing Package Schematics Features ● Black casing provides superior contrast ● Reliable & robust ● Custom color combinations available ● MSL (Moisture Sensitivity Level): 3 ● Housing material: PPA ● Housing UL rating : 94V-0 ● High temperature resistant housing ● High glass transition temperature epoxy ● RoHS compliant Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Red (GaAsP/GaP) Unit Operating Characteristics (TA=25°C) Red (GaAsP/ GaP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Voltage (Typ.) (IF=10mA) VF 1.9 V Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 160 mA Forward Voltage (Max.) (IF=10mA) VF 2.5 V Power Dissipation PD 75 mW Reverse Current (Max.) (VR=5V) IR 10 uA Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=10mA) λP 627* nm Wavelength of Dominant Emission CIE127-2007* (Typ.) (IF=10mA) λD 617* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) △λ 45 nm C 15 pF Storage Temperature °C A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Capacitance (Typ.) (VF=0V, f=1MHz) Part Number XRS2LUR11D Emitting Color Red Emitting Material GaAsP/GaP Lens-color Red Diffused Luminous Intensity CIE127-2007* (IF=10mA) mcd min. typ. 12 10* 29 19* Wavelength CIE127-2007* nm λP 627* Viewing Angle 2θ 1/2 50° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Oct 10,2016 XDSB0232 V6-X Layout: Maggie L. P. 1/4 Part Number: XRS2LUR11D 3mm Two Position SMD CBI Housing Red ™ Red LED is recommended for reflow soldering and soldering profile is shown below. Oct 10,2016 XDSB0232 V6-X Layout: Maggie L. P. 2/4 Part Number: XRS2LUR11D 3mm Two Position SMD CBI Housing ™ Reel Dimension ™ Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Oct 10,2016 XDSB0232 V6-X Layout: Maggie L. P. 3/4 Part Number: XRS2LUR11D 3mm Two Position SMD CBI Housing PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Oct 10,2016 XDSB0232 V6-X Layout: Maggie L. P. 4/4