XSM2DG983W

Part Number: XSM2DG983W SUPER FLUX LED LAMP Features Package Schematics ● High current operation for greater luminous output ● Low power consumption and thermal resistance ● Can be used with automatic insertion equipment ● RoHS Compliant Benefits: ●Rugged design allows for easy maintenance ●Robust package for optimum reliability Typical Applications: ●Automotive side markers ●Gaming and entertainment lighting ●Signs and road hazard indicators ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Absolute Maximum Ratings (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Green (InGaN) Unit 3.3 V Forward Voltage (Max.) (IF=30mA) VF 4.1 V Reverse Current (Max.) (VR=5V) IR 50 uA Wavelength of Peak Emission CIE127-2007*(Typ.) (IF=30mA) λP 520* nm °C Wavelength of Dominant Emission CIE127-2007*(Typ.) (IF=30mA) λD 525* nm V Spectral Line Full Width At Half Maximum (Typ.) (IF=30mA) △λ 35 nm C 100 pF Rθj-pin 150 °C/W 5 V DC Forward Current IF 30 mA Power Dissipation PD 123 mW Operating Temperature TA -40 ~ +85 -55 ~ +85 Electrostatic Discharge Threshold (HBM) Lead Solder Temperature [1.5mm Below Seating Plane.][1] 450 260°C For 5 Seconds Capacitance (Typ.) (VF=0V, f=1MHz) Thermal Resistance (Typ.) 1.No Reflow soldering . 2.A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Part Emitting Emitting Lens-color Number Color Material XSM2DG983W Green Unit VF VR Tstg Green (InGaN) Forward Voltage (Typ.) (IF=30mA) Reverse Voltage Storage Temperature Operating Characteristics (TA=25°C) InGaN Water Clear Luminous Intensity Luminous Flux Wavelength CIE127-2007* CIE127-2007* CIE127-2007* λP nm (IF=30mA) cd (IF=30mA) lm min. typ. typ. 3.6* 5.99* 6.3* 520* Viewing Angle 2θ 1/2 40° 1.Luminous intensity is measured with an integrating sphere after the device has stabilized. 2.θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 3.LEDs are binned according to their Luminous intensity. * Luminous intensity / luminous flux value and wavelength are in accordance with CIE127-2007 standards. Oct 10,2016 XDSB7672 V2-Z Layout: Maggie L. P. 1/3 Part Number: XSM2DG983W SUPER FLUX LED LAMP Green ™ Green Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Oct 10,2016 XDSB7672 V2-Z Layout: Maggie L. P. 2/3 Part Number: XSM2DG983W SUPER FLUX LED LAMP PACKING & LABEL SPECIFICATIONS XSxxx983x TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Oct 10,2016 XDSB7672 V2-Z Layout: Maggie L. P. 3/3