XSUGR18M

Part Number: XSUGR18M 2mm x 5mm BI-COLOR RECTANGULAR LED LAMP Package Schematics Features ● Radial / Through hole package ● Reliable & robust ● Low power consumption ● Available on tape and reel ● RoHS Compliant Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Red (GaAsP/ GaP) Green (GaP) Unit Operating Characteristics (TA=25°C) Red (GaAsP/ GaP) Green (GaP) Unit Forward Current IF 30 25 mA VF 2 2.2 V Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Forward Voltage (Typ.) (IF=20mA) iFS 160 140 mA Forward Voltage (Max.) (IF=20mA) VF 2.5 2.5 V Power Dissipation PD 75 62.5 mW Operating Temperature TA -40 ~ +85 Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) λP 627* 565* nm Tstg -40 ~ +85 Wavelength of Dominant Emission CIE127-2007* (Typ.) (IF=20mA) λD 617* 568* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 45 30 nm C 15 15 pF Storage Temperature °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Part Number Emitting Color Red Emitting Material Capacitance (Typ.) (VF=0V, f=1MHz) Lens-color GaAsP/GaP XSUGR18M White Diffused Green GaP Luminous Intensity CIE127-2007* (IF=20mA) mcd Wavelength CIE127-2007* nm λP min. typ. 2 1.2* 5 3.8* 627* 2 2* 5 5* 565* Viewing Angle 2θ 1/2 140° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Oct 10,2016 XDSA2601 V8-X Layout: Maggie L. P. 1/3 Part Number: XSUGR18M 2mm x 5mm BI-COLOR RECTANGULAR LED LAMP Green Red ™ Red ™ Green Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Oct 10,2016 XDSA2601 V8-X Layout: Maggie L. P. 2/3 Part Number: XSUGR18M 2mm x 5mm BI-COLOR RECTANGULAR LED LAMP PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Oct 10,2016   XDSA2601 V8-X Layout: Maggie L. P. 3/3