XZBGA55W-2

Part Number: XZBGA55W-2 3.2x1.6mm SMD CHIP LED LAMP PRELIMINARY SPEC Features z 3.2mmx1.6mm SMT LED,1.05mm THICKNESS. z LOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. z IDEAL FOR BACKLIGHT AND INDICATOR. z VAVRIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: Operating Characteristics (TA=25°C) 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. VF 3.2 V Forward Voltage (Max.) (IF=20mA) VF 4.0 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 520 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 525 nm °C Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 35 nm V Capacitance (Typ.) (VF=0V, f=1MHz) C 100 pF BGA (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 100 mA Power Dissipation PT 120 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Electrostatic Discharge Threshold (HBM) Part Number XZBGA55W-2 Emitting Color Green Published Date JAN 17, 2008 1000 Emitting Material InGaN Unit Forward Voltage (Typ.) (IF=20mA) 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) BGA (InGaN) Luminous Intensity (IF=20mA) mcd Lens-color min. typ. 50 178 Water Clear Drawing No : XDSB0349 V2 Wavelength nm λP Viewing Angle 2 θ 1/2 520 120° Checked : B.L.LIU P.1/4 Part Number: XZBGA55W-2 3.2x1.6mm SMD CHIP LED LAMP ™ BGA Published Date JAN 17, 2008 Drawing No : XDSB0349 V2 Checked : B.L.LIU P.2/4 Part Number: XZBGA55W-2 3.2x1.6mm SMD CHIP LED LAMP ™ Recommended Soldering Pattern (Units : mm; Tolerance:± 0.1) ™ The device has a single mounting surface. The device must be mounted according to the specifications. ™ Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date JAN 17, 2008 Drawing No : XDSB0349 V2 Checked : B.L.LIU P.3/4 Part Number: XZBGA55W-2 3.2x1.6mm SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date JAN 17, 2008 Drawing No : XDSB0349 XZBGA55W-2 V2 Checked : B.L.LIU P.4/4