XZBGRBBRMERK150W

Part Number: XZBGRBBRMERK150W 1 x 1 x 0.2 mm Full-Color Surface Mount LED Package Schematics Features ● Ideal for indication light on hand held products ● Long life and robust package ● Standard Package: 4,000pcs/ Reel ● MSL (Moisture Sensitivity Level):3 ● Low current IF=5mA operating. ● Halogen-free ● RoHS compliant ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Green (InGa N) Blue Red (InGa (AlGa Unit N) InP) Reverse Voltage VR 5 5 5 V Forward Current [2] IF 10 10 10 mA Forward Current (Peak) Duty Cycle ≤ 1/20 1ms Pulse Width iFS 50 50 50 mA Power Dissipation [1] PD 35 35 35 mW 1000 1000 3000 V Electrostatic Discharge Threshold (HBM) Operating Temperature TA -40 ~ +85 Tstg -40 ~ +100 °C Storage Temperature Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=5mA) VF 3 2.9 1.95 V Forward Voltage (Max.) (IF=5mA) VF 3.2 3.1 2.3 V Reverse Current (Max.) (VR=5V) IR 50 50 10 µA Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=5mA) λP 518* 461* 632* nm Wavelength of Dominant Emission CIE127-2007* (Typ.) (IF=5mA) λD 527* 467* 624* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=5mA) △λ 35 22 20 nm C 100 110 25 pF A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Capacitance (Typ.) (VF=0V, f=1MHz) Part Number XZBGRBBRMERK150W Emitting Color Emitting Material Green InGaN Blue InGaN Red AlGaInP Green Blue Red Unit (InGaN) (InGaN) (AlGaInP) Lens-color Water Clear Luminous Intensity CIE127-2007* (IF=5mA) mcd Wavelength CIE127-2007* nm λP min. typ. 50* 79* 518* 10* 22* 461* 15* 29* 632* Viewing Angle 2θ 1/2 150° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Dec 05, 2020 XDSB8441 V6-Z Layout: Maggie L. P. 1/4 Part Number: XZBGRBBRMERK150W 1 x 1 x 0.2 mm Full-Color Surface Mount LED Blue Green Red 0° 1.0 30° Ta = 25 °C Relative Radiant Intensity 15° Ta = 25 °C 100% 80% 45° 60% 60° 0.5 40% 20% 75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 90° 800 0° Relative Intensity Vs. CIE Wavelength 15° 30° 45° 60° 75° 0.0 90° Spatial Distribution Forward current (mA) Ta = 25 °C 8 6 4 2 0 2.4 2.6 2.8 3.0 3.2 3.4 2.5 Ta = 25 °C 2.0 1.5 1.0 0.5 0.0 0 3.6 Forward voltage (V) Forward Current vs. Forward Voltage 2 4 6 8 Forward current (mA) Luminous Intensity vs. Forward Current 10 15 Luminous intensity normalised at T a = 25 °C Luminous intensity normalised at 5 mA 10 Permissible forward current (mA)
Green 12.5 10 7.5 5 2.5 0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Forward Current Derating Curve -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Luminous Intensity vs. Ambient Temperature Forward current (mA) Ta = 25 °C 15 10 5 0 2.4 2.5 Ta = 25 °C 2.0 1.5 1.0 0.5 0.0 2.6 2.8 3.0 3.2 Forward voltage (V) Forward Current vs. Forward Voltage 0 3.4 5 10 15 Forward current (mA) Luminous Intensity vs. Forward Current 20 Luminous intensity normalised at T a = 25 °C 20 Permissible forward current (mA) Luminous intensity normalised at 5 mA
Blue 15 10 5 0 20 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Luminous Intensity vs. Ambient Temperature -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Forward Current Derating Curve Ta = 25 °C 15 10 5 0 1.7 1.8 1.9 2.0 2.1 Forward voltage (V) Forward Current vs. Forward Voltage Dec 05, 2020 2.2 2.5 Ta = 25 °C 2.0 1.5 1.0 0.5 0.0 0 5 10 15 Forward current (mA) Luminous Intensity vs. Forward Current 20 Luminous intensity normalised at T a = 25 °C Forward current (mA) 20 Permissible forward current (mA) Luminous intensity normalised at 5 mA
Red 20 15 10 5 0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Forward Current Derating Curve XDSB8441 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Luminous Intensity vs. Ambient Temperature V6-Z Layout: Maggie L. P. 2/4 Part Number: XZBGRBBRMERK150W 1 x 1 x 0.2 mm Full-Color Surface Mount LED
LED is recommended for reflow soldering and soldering profile is shown below.
The device has a single mounting surface. The device must be mounted according to the specifications.
Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1)
Tape Specification (Units : mm)
Reel Dimension (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V 4.Within 35mW when multiple chips are lightened 5.The maximum ratings are valid for the case of lighting a single chip When two chips are lit at the same time, each chip should be driven at a current lower than 50% of the absolute maximum ratings When three chips are lit at the same time, each chip should be driven at a current lower than 30% of the absolute maximum ratings 6.Duty Cycle ≤ 1/20, Pulse Width=1ms. Note: Accuracy may depend on the sorting parameters. Dec 05, 2020 XDSB8441 V6-Z Layout: Maggie L. P. 3/4 Part Number: XZBGRBBRMERK150W 1 x 1 x 0.2 mm Full-Color Surface Mount LED PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at https://www.SunLEDusa.com/TechnicalNotes.asp Dec 05, 2020 XDSB8441 V6-Z Layout: Maggie L. P. 4/4