XZCB25MO24DG25X111S

Part Number: XZCB25MO24DG25X111S 5.0mm x 5.0mm SURFACE MOUNT LED LAMP Features ● Ideal for indication light on hand held products ● Long life and robust package ● White SMD package, silicone resin. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES ● Standard Package: 500pcs/ Reel ● MSL (Moisture Sensitivity Level): 3 ● RoHS compliant. Package Schematics Green Red Blue Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15[±0.006]unless otherwise noted. 3. Specifications are subject to change without notice. Jan 12, 2017 XDSB5772 V5-Z Layout: Maggie L. P. 1/7 Part Number: XZCB25MO24DG25X111S 5.0mm x 5.0mm SURFACE MOUNT LED LAMP Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. Jan 12, 2017 XDSB5772 V5-Z Layout: Maggie L. P. 2/7 Part Number: XZCB25MO24DG25X111S 5.0mm x 5.0mm SURFACE MOUNT LED LAMP Selection Guide Part Number XZCB25MO24DG25X111S Emitting Color Emitting Material Blue InGaN Red AlGaInP Green InGaN Lens-color Water Clear Luminous Intensity CIE127-2007* [2] (IF=150mA) cd Luminous Flux CIE127-2007* [2] (IF=150mA ) lm Viewing Angle 2 θ 1/2 [1] min. typ. min. typ. max. 1* 1.59* 2.9* 4* 6 2.7* 4.29* 8.6* 10.7* 17 4.2* 5.99* 12* 16.7* 29 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *LEDs are binned according to their luminous flux. * Luminous Intensity/Luminous Flux value is in accordance with CIE127-2007 standards. Absolute Maximum Ratings at Ta=25°C Parameter Power dissipation Junction temperature Symbol PD TJ Emitting Color Value Blue 0.6 Red 0.45 Green 0.6 Blue 110 Red 110 Green 110 Unit W °C Blue Operating Temperature Top Red -40 To +85 °C -40 To +85 °C Green Blue Storage Temperature Tstg Red Green DC Forward Current [1] Peak Forward Current [2] Thermal resistance Thermal resistance IF IFM Rth j-a Rth j-s Blue 150 Red 150 Green 150 Blue 300 Red 300 Green 300 Blue 220 Red 270 Green 200 Blue 25 Red 40 Green 33 mA mA °C/W °C/W Notes: 1. Results from mounting on Aluminum Board. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3. A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/ JESD625-A and JEDEC/J-STD-033) Jan 12, 2017 XDSB5772 V5-Z Layout: Maggie L. P. 3/7 Part Number: XZCB25MO24DG25X111S 5.0mm x 5.0mm SURFACE MOUNT LED LAMP Electrical / Optical Characteristics at Ta=25°C Value Parameter Symbol Emitting Color Unit Min. Wavelength at peak emission CIE127-2007* IF=150mA Typ. Max. Blue 452* Red 635* Wavelength at peak emission CIE127-2007* IF=150mA Green 515* Dominant Wavelength CIE127-2007* IF=150mA Blue 460* 473* Red 624* - Dominant Wavelength CIE127-2007* IF=150mA Green 525* 535* Spectral Line Half-width IF=150mA Blue 20 Red 20 Spectral Line Half-width IF=150mA Green 30 Forward Voltage IF=150mA Blue 3.0 3.5 4.0 Red 2.0 2.5 3.0 Green 3.0 3.5 4.0 Wavelength at peak emission CIE127-2007* IF=150mA Dominant Wavelength CIE127-2007* IF=150mA Spectral Line Half-width IF=150mA Forward Voltage IF=150mA λpeak λdom [1] Δλ1/2 VF [2] Forward Voltage IF=150mA Reverse Voltage VR Temperature coefficient of λpeak IF=150mA, -10°C≤ T≤100°C 5 Red 5 Green 5 0.12 Red 0.09 Temperature coefficient of λpeak IF=150mA, -10°C≤ T≤100°C Green 0.13 Temperature coefficient of λdom IF=150mA, -10°C≤ T≤100°C Blue 0.1 Red 0.03 Temperature coefficient of λdom IF=150mA, -10°C≤ T≤100°C Green 0.11 Temperature coefficient of VF IF=150mA, -10°C≤ T≤100°C Blue -2.3 Red -2.7 Green -3.9 Temperature coefficient of λdom IF=150mA, -10°C≤ T≤100°C Temperature coefficient of VF IF=150mA, -10°C≤ T≤100°C Temperature coefficient of VF IF=150mA, -10°C≤ T≤100°C TCλpeak TCλdom TCV nm nm Blue Blue Temperature coefficient of λpeak IF=150mA, -10°C≤ T≤100°C nm V V nm/ °C nm/ °C mV/ °C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.2V. *wavelength is in accordance with CIE127-2007 standards. Jan 12, 2017 XDSB5772 V5-Z Layout: Maggie L. P. 4/7 Part Number: XZCB25MO24DG25X111S 5.0mm x 5.0mm SURFACE MOUNT LED LAMP Blue Green Red ™ Blue ™ Red ™ Green Jan 12, 2017 XDSB5772 V5-Z Layout: Maggie L. P. 5/7 Part Number: XZCB25MO24DG25X111S 5.0mm x 5.0mm SURFACE MOUNT LED LAMP Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Reel Dimension ™ Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) ™ The device has a single mounting surface. The device must be mounted according to the specifications. ™ Tape Specification (Units : mm) Jan 12, 2017 XDSB5772 V5-Z Layout: Maggie L. P. 6/7 Part Number: XZCB25MO24DG25X111S 5.0mm x 5.0mm SURFACE MOUNT LED LAMP PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Jan 12, 2017 XDSB5772 V5-Z Layout: Maggie L. P. 7/7