XZDGK53W-8ST

Part Number: XZDGK53W-8ST 1.6 x 0.8mm SMD Chip LED Lamp Features Package Schematics ● Ideal for indication light on hand held products ● Long life and robust package ● Standard Package: 4,000pcs/ Reel ● MSL (Moisture Sensitivity Level): 3 ● Halogen-free ● RoHS compliant ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Absolute Maximum Ratings (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. Green (InGaN) Unit Operating Characteristics (TA=25°C) Green (InGaN) Unit Reverse Voltage VR 5 V 3.3 V IF 20 mA Forward Voltage (Typ.) (IF=20mA) VF Forward Current VF 4.1 V Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 100 mA Forward Voltage (Max.) (IF=20mA) 50 µA PD 82 mW Reverse Current (Max.) (VR=5V) IR Power Dissipation Operating Temperature TA -40 ~ +85 Wavelength of Peak Emission CIE127-2007*(Typ.) (IF=20mA) λP 515* nm Wavelength of Dominant Emission CIE127-2007*(Typ.) (IF=20mA) λD 525* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 35 nm C 45 pF °C Storage Temperature Tstg -40 ~ +85 Electrostatic Discharge Threshold (HBM) 450 V A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Capacitance (Typ.) (VF=0V, f=1MHz) Part Number XZDGK53W-8ST Emitting Color Green Emitting Material InGaN Lens-color Water Clear Luminous Intensity CIE127-2007* (IF=20mA) mcd min. typ. 400* 935* Wavelength CIE127-2007* nm λP Viewing Angle 2θ 1/2 515* 100° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Nov 30,2020 XDSB8570 V2-Z Layout: Maggie L. P. 1/4 Part Number: XZDGK53W-8ST 1.6 x 0.8mm SMD Chip LED Lamp Green 100% Relative Radiant Intensity 0° 15° Ta = 25 °C Ta = 25 °C 1.0 30° 80% 45° 60% 60° 40% 20% 0.5 75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 90° 800 0° 15° 30° 45° 60° 75° 0.0 90° Spatial Distribution Relative Intensity Vs. CIE Wavelength Forward current (mA) T a = 25 °C 20 15 10 5 0 2.0 2.4 2.8 3.2 3.6 Forward voltage (V) Forward Current vs. Forward Voltage 4.0 2.5 T a = 25 °C 2.0 1.5 1.0 0.5 0.0 0 5 10 15 20 Forward current (mA) Luminous Intensity vs. Forward Current 25 25 Luminous intensity normalised at T a = 25 °C Luminous intensity normalised at 20 mA 25 Permissible forward current (mA)
Green 20 15 10 5 0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Forward Current Derating Curve -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Luminous Intensity vs. Ambient Temperature LED is recommended for reflow soldering and soldering profile is shown below. Nov 30,2020 XDSB8570 V2-Z Layout: Maggie L. P. 2/4 Part Number: XZDGK53W-8ST 1.6 x 0.8mm SMD Chip LED Lamp
The device has a single mounting surface. The device must be mounted according to the specifications.
Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1)
Reel Dimension (Units : mm)
Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Nov 30,2020 XDSB8570 V2-Z Layout: Maggie L. P. 3/4 Part Number: XZDGK53W-8ST 1.6 x 0.8mm SMD Chip LED Lamp PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at https://www.SunLEDusa.com/TechnicalNotes.asp Nov 30,2020 XDSB8570 V2-Z Layout: Maggie L. P. 4/4