Part Number: XZFMDK14A
Surface Mount Display
Features
Package Schematics
● 0.56 inch digit height
● Robust package
● Low power consumption
● Standard configuration: Gray face w/ white
segments
● Standard Package: 400pcs/ Reel
● MSL (Moisture Sensitivity Level): 2a
● RoHS compliant
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm.
Absolute Maximum Ratings
(TA=25°C)
Red
(AlGaInP)
Unit
Operating Characteristics
(TA=25°C)
Red
(AlGaInP)
Unit
Reverse Voltage
VR
5
V
Forward Voltage (Typ.) (IF=10mA)
VF
1.85
V
Forward Current
IF
30
mA
Forward Voltage (Max.) (IF=10mA)
VF
2.35
V
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
Reverse Current (Max.) (VR=5V)
IR
10
µA
iFS
185
mA
λP
645*
nm
Power Dissipation
PD
75
mW
Wavelength of Peak
Emission CIE127-2007* (Typ.)
(IF=10mA)
Wavelength of Dominant
Emission CIE127-2007* (Typ.)
(IF=10mA)
λD
630*
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=10mA)
△λ
28
nm
C
35
pF
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
°C
Storage Temperature
A Relative Humidity between 40% and 60% is recommended in
ESD-protected work areas to reduce static build up during assembly
process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033)
Capacitance (Typ.)
(VF=0V, f=1MHz)
Part
Number
XZFMDK14A
Emitting
Color
Red
Emitting
Material
AlGaInP
Luminous Intensity
CIE127-2007*
(IF=10mA)
ucd
min.
typ.
31000
14000*
79990
28990*
Wavelength
CIE127-2007*
nm
λP
Description
645*
Common Anode,Rt.
Hand Decimal.
*Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.
Dec 09,2020
XDSA9099
V9-X
Layout: Maggie L.
P. 1/4
Part Number: XZFMDK14A
Surface Mount Display
Red
100%
Relative Radiant Intensity
Ta = 25 °C
80%
60%
40%
20%
0%
350
400
450
500
550
600
Wavelength (nm)
650
700
750
800
Relative Intensity Vs. CIE Wavelength
2.5
Ta = 25 °C
16
Ta = 25 °C
2.0
12
1.5
8
1.0
4
0
1.6
Permissible forward current
(mA)
Forward current (mA)
20
0.5
0.0
1.7
1.8
1.9
2.0
Forward voltage (V)
Forward Current vs.
Forward Voltage
2.1
Luminous intensity normalised
at Ta = 25 °C
Luminous intensity normalised
at 10mA
Red
50
40
30
20
10
0
0
4
8
12
16
Forward current (mA)
Luminous Intensity vs.
Forward Current
20
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Forward Current
Derating Curve
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous Intensity vs.
Ambient Temperature
LED is recommended for reflow soldering and
soldering profile is shown below.
Dec 09,2020
XDSA9099
V9-X
Layout: Maggie L.
P. 2/4
Part Number: XZFMDK14A
Surface Mount Display
Recommended Soldering Pattern (Units : mm; Tolerance: ±0.15)
Tape Specification (Units : mm)
Reel Dimension (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the
typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Dec 09,2020
XDSA9099
V9-X
Layout: Maggie L.
P. 3/4
Part Number: XZFMDK14A
Surface Mount Display
PACKING & LABEL SPECIFICATIONS
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6.When any special process such as potting is required for LED assembly, please consult with SunLED representative before proceeding.
7. Additional technical notes are available at https://www.SunLEDusa.com/TechnicalNotes.asp
Dec 09,2020
XDSA9099
V9-X
Layout: Maggie L.
P. 4/4
很抱歉,暂时无法提供与“XZFMDK14A”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 400+11.20078400+1.38946
- 800+10.62248800+1.31772
- 1200+10.333631200+1.28189
- 2000+10.014432000+1.24229
- 2800+9.828192800+1.21919
- 4000+9.649464000+1.19701
- 国内价格 香港价格
- 1+25.940631+3.21793
- 10+17.2415510+2.13881
- 100+12.76661100+1.58370