Part Number: XZM2CRK81FS
2.8 x 0.8 mm Right Angle SMD Chip LED Lamp
Features
Package Schematics
● VersoLEDs: Versatile Solutions
● Ideal for indication light on hand held products
● Long life and robust package
● Standard Package: 2,000pcs/ Reel
● MSL (Moisture Sensitivity Level): 3
● Halogen-free
● RoHS compliant
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
Red
(AlGaInP)
Unit
Operating Characteristics
(TA=25°C)
Red
(AlGaInP)
Unit
Reverse Voltage
VR
5
V
2.2
V
IF
30
mA
Forward Voltage (Typ.)
(IF=20mA)
VF
Forward Current
VF
2.8
V
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
150
mA
Forward Voltage (Max.)
(IF=20mA)
10
µA
PD
84
mW
Reverse Current (Max.)
(VR=5V)
IR
Power Dissipation
Operating Temperature
TA
-40 ~ +85
Wavelength of Peak
Emission CIE127-2007* (Typ.)
(IF=20mA)
λP
640*
nm
Wavelength of Dominant
Emission CIE127-2007*(Typ.)
(IF=20mA)
λD
625*
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
△λ
20
nm
C
27
pF
°C
Storage Temperature
Tstg
-40 ~ +85
A Relative Humidity between 40% and 60% is recommended in
ESD-protected work areas to reduce static build up during assembly
process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033)
Capacitance (Typ.)
(VF=0V, f=1MHz)
Part
Number
XZM2CRK81FS
Emitting
Color
Red
Emitting
Material
AlGaInP
Lens-color
Water Clear
Luminous Intensity
CIE127-2007*
(IF=20mA)
mcd
min.
typ.
1000
300*
1590
497*
Wavelength
CIE127-2007*
nm
λP
Viewing
Angle
2θ 1/2
640*
110°
*Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.
Dec 02,2020
XDSB7806
V6-X
Layout: Maggie L.
P. 1/5
Part Number: XZM2CRK81FS
2.8 x 0.8 mm Right Angle SMD Chip LED Lamp
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED
products. Failure to comply might lead to damage and premature failure of the LED.
1.Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
2. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
Dec 02,2020
XDSB7806
V6-X
Layout: Maggie L.
P. 2/5
Part Number: XZM2CRK81FS
2.8 x 0.8 mm Right Angle SMD Chip LED Lamp
Red
Relative Radiant Intensity
100%
0°
15°
Ta = 25 °C
Ta = 25 °C
1.0
30°
80%
45°
60%
60°
40%
20%
0.5
75°
0%
350
400
450
500
550
600
Wavelength (nm)
650
700
750
90°
800
0°
Relative Intensity Vs. CIE Wavelength
15°
30°
45°
60°
75°
0.0
90°
Spatial Distribution
Ta = 25 °C
40
30
20
10
0
1.5
1.7
1.9
2.1
2.3
Forward voltage (V)
Forward Current vs.
Forward Voltage
2.5
2.5
Ta = 25 °C
2.0
1.5
1.0
0.5
0.0
Luminous intensity normalised
at T a = 25 °C
Forward current (mA)
50
Permissible forward current
(mA)
Luminous intensity normalised
at 20 mA
Red
50
40
30
20
10
0
0
10
20
30
40
Forward current (mA)
Luminous Intensity vs.
Forward Current
50
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Forward Current
Derating Curve
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous Intensity vs.
Ambient Temperature
LED is recommended for reflow soldering and
soldering profile is shown below.
Dec 02,2020
XDSB7806
V6-X
Layout: Maggie L.
P. 3/5
Part Number: XZM2CRK81FS
2.8 x 0.8 mm Right Angle SMD Chip LED Lamp
The device has a single mounting surface.
The device must be mounted according to
the specifications.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension (Units : mm)
Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Dec 02,2020
XDSB7806
V6-X
Layout: Maggie L.
P. 4/5
Part Number: XZM2CRK81FS
2.8 x 0.8 mm Right Angle SMD Chip LED Lamp
PACKING & LABEL SPECIFICATIONS
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at https://www.SunLEDusa.com/TechnicalNotes.asp
Dec 02,2020
XDSB7806
V6-X
Layout: Maggie L.
P. 5/5
很抱歉,暂时无法提供与“XZM2CRK81FS”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 2000+1.835372000+0.22951
- 6000+1.713026000+0.21421
- 10000+1.6518410000+0.20656
- 50000+1.5600750000+0.19509
- 国内价格 香港价格
- 1+6.059871+0.75778
- 10+3.9810310+0.49783
- 100+2.63060100+0.32896
- 1000+2.031121000+0.25399