XZM2CYK67WT

Part Number: XZM2CYK67WT 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Package Schematics Features ● Ideal for indication light on hand held products ● Long life and robust package ● Standard Package: 500pcs/ Reel ● MSL (Moisture Sensitivity Level): 3 ● RoHS compliant Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Yellow (AlGaInP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 140 mA Power Dissipation PD 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 °C Storage Temperature A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Operating Characteristics (TA=25°C) XZM2CYK67WT Emitting Color Super Bright Yellow Emitting Material AlGaInP Unit Forward Voltage (Typ.) (IF=20mA) VF 2 V Forward Voltage (Max.) (IF=20mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) λP 590* nm Wavelength of Dominant Emission CIE127-2007* (Typ.) (IF=20mA) λD 590* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 20 nm C 45 pF Capacitance (Typ.) (VF=0V, f=1MHz) Part Number Yellow (AlGaInP) Lens-color Water Clear Luminous Intensity CIE127-2007* (VF=12V) mcd min. typ. 400* 547* Wavelength CIE127-2007* nm λP Viewing Angle 2θ 1/2 590* 120° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Apr 12,2016 XDSB8633 V1-Z Layout: Maggie L. P. 1/4 Part Number: XZM2CYK67WT 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Yellow ™ Yellow LED is recommended for reflow soldering and soldering profile is shown below. Apr 12,2016 XDSB8633 V1-Z Layout: Maggie L. P. 2/4 Part Number: XZM2CYK67WT 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP ™ The device has a single mounting surface. The device must be mounted according to the specifications. ™ Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) ™ Reel Dimension ™ Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Apr 12,2016 XDSB8633 V1-Z Layout: Maggie L. P. 3/4 Part Number: XZM2CYK67WT 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Apr 12,2016 XDSB8633 V1-Z Layout: Maggie L. P. 4/4