XZM2MOK53W-8

Part Number: XZM2MOK53W-8 1.6X0.8mm SMD CHIP LED LAMP Package Schematics Features ● VersoLEDs: Versatile Solutions ● Ideal for indication light on hand held products ● Long life and robust package ● Standard Package: 2,000pcs/ Reel ● MSL (Moisture Sensitivity Level): 3 ● RoHS compliant Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) M2MOK (AlGaInP) Unit Operating Characteristics (TA=25°C) M2MOK (AlGaInP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Voltage (Typ.) (IF=20mA) VF 2.2 V VF 2.8 V Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 mA Forward Voltage (Max.) (IF=20mA) Power Dissipation PD 84 mW Reverse Current (Max.) (VR=5V) IR 10 uA Operating Temperature TA -40 ~ +85 λP 611* nm Tstg -40 ~ +85 Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) Wavelength of Dominant Emission CIE127-2007* (Typ.) (IF=20mA) λD 605* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 17 nm C 27 pF Storage Temperature °C Capacitance (Typ.) (VF=0V, f=1MHz) Part Number XZM2MOK53W-8 Emitting Color Orange Emitting Material AlGaInP Lens-color Water Clear Luminous Intensity CIE127-2007* (IF=20mA) mcd min. typ. 3300 1000* 4190 1590* Wavelength CIE127-2007* nm λP Viewing Angle 2θ 1/2 611* 60° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. May 06,2015 XDSB8250 V2-X Layout: Maggie L. P. 1/4 Part Number: XZM2MOK53W-8 1.6X0.8mm SMD CHIP LED LAMP ™ M2MOK LED is recommended for reflow soldering and soldering profile is shown below. May 06,2015 XDSB8250 V2-X Layout: Maggie L. P. 2/4 Part Number: XZM2MOK53W-8 1.6X0.8mm SMD CHIP LED LAMP ™ The device has a single mounting surface. The device must be mounted according to the specifications. ™ Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) ™ Reel Dimension ™ Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. May 06,2015 XDSB8250 V2-X Layout: Maggie L. P. 3/4 Part Number: XZM2MOK53W-8 1.6X0.8mm SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp May   06,2015 XDSB8250 V2-X Layout: Maggie L. P. 4/4