XZMDKDGK56W

Part Number: XZMDKDGK56W 3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP Package Schematics Features ● Ideal for indication light on hand held products ● Long life and robust package ● Standard Package: 2,000pcs/ Reel ● MSL (Moisture Sensitivity Level): 3 ● RoHS compliant ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Red (AlGaInP) Green (InGaN) Unit Reverse Voltage VR 5 5 V Forward Current IF 30 25 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PD Electrostatic Discharge Threshold (HBM) Operating Temperature Storage Temperature 185 150 mA 75 102.5 mW 3000 450 V TA -40 ~ +85 Tstg -40 ~ +85 °C A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Operating Characteristics (TA=25°C) Emitting Color Hyper Red Emitting Material 1.95 3.3 V Forward Voltage (Max.) (IF=20mA) VF 2.5 4.1 V Reverse Current (Max.) (VR=5V) IR 10 50 uA Wavelength of Peak Emission CIE127-2007*(Typ.) (IF=20mA) λP 645* 515* nm Wavelength of Dominant Emission CIE127-2007*(Typ.) (IF=20mA) λD 630* 525* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 28 35 nm C 35 45 pF Lens-color Water Clear Green Unit VF AlGaInP XZMDKDGK56W Green (InGaN) Forward Voltage (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) Part Number Red (AlGaInP) InGaN Luminous Intensity CIE127-2007* (IF=20mA) mcd Wavelength CIE127-2007* nm λP min. typ. 120 40* 297 79* 645* 200 200* 317 317* 515* Viewing Angle 2θ 1/2 140° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Sep 10,2016 XDSB8782 V1-X Layout: Maggie L. P. 1/4 Part Number: XZMDKDGK56W 3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP ™ Red ™ Green Sep 10,2016 XDSB8782 V1-X Layout: Maggie L. P. 2/4 Part Number: XZMDKDGK56W 3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP LED is recommended for reflow soldering and soldering profile is shown below. ™ The device has a single mounting surface. The device must be mounted according to the specifications. ™ Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) ™ Tape Specification (Units : mm) ™ Reel Dimension Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Sep 10,2016 XDSB8782 V1-X Layout: Maggie L. P. 3/4 Part Number: XZMDKDGK56W 3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS XZxxx56xx TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Sep 10,2016   XDSB8782 V1-X Layout: Maggie L. P. 4/4