Part Number: XZMOK60W
3.0mmx1.5mm SMD CHIP LED LAMP
Package Schematics
Features
● Ideal for indication light on hand held products
● Long life and robust package
● Standard Package: 2,000pcs/ Reel
● MSL (Moisture Sensitivity Level): 3
● RoHS compliant
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
Orange
(AlGaInP)
Unit
Operating Characteristics
(TA=25°C)
Orange
(AlGaInP)
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
30
mA
Forward Voltage (Typ.)
(IF=20mA)
VF
2.1
V
VF
2.5
V
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
195
mA
Forward Voltage (Max.)
(IF=20mA)
Power Dissipation
PD
75
mW
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Operating Temperature
TA
-40 ~ +85
λP
610*
nm
Tstg
-40 ~ +85
Wavelength of Peak
Emission CIE127-2007*(Typ.)
(IF=20mA)
Wavelength of Dominant
Emission CIE127-2007*(Typ.)
(IF=20mA)
λD
601*
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
△λ
29
nm
C
15
pF
Storage Temperature
°C
A Relative Humidity between 40% and 60% is recommended in
ESD-protected work areas to reduce static build up during assembly
process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033)
Capacitance (Typ.)
(VF=0V, f=1MHz)
Part
Number
XZMOK60W
Emitting
Color
Orange
Emitting
Material
AlGaInP
Lens-color
Water Clear
Luminous Intensity
CIE127-2007*
(IF=20mA)
mcd
min.
typ.
350
120*
597
347*
Wavelength
CIE127-2007*
nm
λP
Viewing
Angle
2θ 1/2
610*
70°
*Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.
Sep 19,2016
XDSA1404
V9-X
Layout: Maggie L.
P. 1/4
Part Number: XZMOK60W
3.0mmx1.5mm SMD CHIP LED LAMP
Orange
Orange
LED is recommended for reflow soldering and
soldering profile is shown below.
Sep 19,2016
XDSA1404
V9-X
Layout: Maggie L.
P. 2/4
Part Number: XZMOK60W
3.0mmx1.5mm SMD CHIP LED LAMP
The device has a single mounting surface.
The device must be mounted according to
the specifications.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Sep 19,2016
XDSA1404
V9-X
Layout: Maggie L.
P. 3/4
Part Number: XZMOK60W
3.0mmx1.5mm SMD CHIP LED LAMP
PACKING & LABEL SPECIFICATIONS
XZxxx60x
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp
Sep 19,2016
XDSA1404
V9-X
Layout: Maggie L.
P. 4/4
