XZTNI55W

Part Number: XZTNI55W 3.2x1.6mm INFRARED EMITTING DIODE Features Package Schematics ● Ideal for indication light on hand held products ● Long life and robust package ● Standard Package: 2,000pcs/ Reel ● MSL (Moisture Sensitivity Level): 3 ● RoHS compliant Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Infrared (GaAs) Unit Reverse Voltage VR 5 V Forward Current IF 50 mA Operating Characteristics (TA=25°C) Infrared (GaAs) Unit Forward Voltage (Typ.) (IF=20mA) VF 1.2 V Forward Voltage (Max.) (IF=20mA) VF 1.6 V Forward Current (Peak) 1/100 Duty Cycle 10us Pulse Width iFS 1200 mA Reverse Current (Max.) (VR=5V) IR 10 uA Power Dissipation PD 80 mW Operating Temperature TA -40 ~ +85 Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) λP 940* nm Tstg -40 ~ +85 Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 50 nm C 90 pF Storage Temperature °C A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033) Part Number XZTNI55W Emitting Material GaAs Lens-color Water Clear Capacitance (Typ.) (VF=0V, f=1MHz) Radiant Intensity CIE127-2007* (Po=mW/sr) @20mA min. typ. 1.2 0.8* 2.8 1.8* Wavelength CIE127-2007* nm λP Viewing Angle 2θ 1/2 940* 160° *Radiant Intensity value and wavelength are in accordance with CIE127-2007 standards. Feb 09,2017 XDSA3782 V4-X Layout: Maggie L. P. 1/4 Part Number: XZTNI55W 3.2x1.6mm INFRARED EMITTING DIODE Infrared ™ Infrared LED is recommended for reflow soldering and soldering profile is shown below. Feb 09,2017 XDSA3782 V4-X Layout: Maggie L. P. 2/4 Part Number: XZTNI55W 3.2x1.6mm INFRARED EMITTING DIODE ™ The device has a single mounting surface. The device must be mounted according to the specifications. ™ Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) ™ Reel Dimension ™ Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage or radiant intensity / luminous flux), the typical accuracy of the sorting process is as follows: 1. Radiant Intensity / Luminous Flux: +/-15% 2. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters Feb 09,2017 XDSA3782 V4-X Layout: Maggie L. P. 3/4 Part Number: XZTNI55W 3.2x1.6mm INFRARED EMITTING DIODE PACKING & LABEL SPECIFICATIONS XZxxx55x TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Feb 09,2017 XDSA3782 V4-X Layout: Maggie L. P. 4/4