M1THRUM7

Suntan M1 THRU M7 SURFACE MOUNT GENERAL RECTIFIER Reverse Voltage -50 to 1000 Volts Forward Current -1.0 Ampere FEATU R E S ‧ The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ‧ For surface mounted applications ‧ Low reverse leakage ‧ Built-in strain relief, ideal for automated placement ‧ High forward surge current capability ‧ High temperature soldering guaranteed: 250℃/10 seconds at terminals 0.178(4.53) 0.157(3.99) 0.078(2.00) 0.063(1.60) 0.111(2.83) 0.100(2.54) ® MECHANICAL DATA Case : JEDEC DO-214AC molded plastic body Terminals : Solder plated solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.003 ounce 0.093 grams 0.096(2.45) 0.078(1.98) 0.060(1.52) 0.030(0.76) 0.012(0.305) 0.006(0.152) 0.008(0.203)MAX 0.224(5.69) 0.194(4.93) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Raings at 25℃ ambient temperature unless otherwise specified Single phase half-wave 60HZ resistive or inductive load ,for capacitive load current derate by 20% SYMBOLS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL=110℃ Peak forward surge current 8.3ms single Half sine-wave superimposed on rated toad (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TA=25℃ at rated DC blocking voltage TA=100℃ Typical junction capacitance (NOTE 1) VRRM VRMS VDC I (AV) M1 50 35 50 M2 100 70 100 M3 200 140 200 M4 400 280 400 1.0 M5 600 420 600 M6 800 560 800 M7 1000 700 1000 UNITS VOLTS VOLTS VOLTS AMP IFSM VF IR CJ 30.0 1.1 5.0 50.0 15.0 75.0 -65 to +175 AMPS VOLTS μA pF ℃/W ℃ Typical thermal resistance (NOTE 2) RqJA Operating junction and storage temperature range TJ, TSTG Note :1. Measured at 1 MHZ and applied reverse voltage of 4.0V D.C 2. P.C.B mounted with 0.2x0.2＂(5.0x5.0mm) copper pad areas Suntan® Technology Company Limited Website: www.suntan.com.hk Email: info@suntan.com.hk Tel: (852) 8202 8782 Fax: (852) 8208 6246 Suntan RATINGS AND CHARACTERISTIC CURVES M1 THRU M7 ® Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: info@suntan.com.hk Tel: (852) 8202 8782 Fax: (852) 8208 6246