SMD Power Inductors (Lead Free)
PDC1045C SERIES
1. PART NO. EXPRESSION :
PDC1045C-2R2MF
(a) (b) (c) (d) (e)(f)
(a) Series code (b) Dimension code (c) Type code
(d) Inductance code : 2R2 = 2.2uH (e) Tolerance code : M = ±20% (f) F : Lead Free
2. CONFIGURATION & DIMENSIONS :
A
L Y X Y
3R3
C'
G
B
D
C
H
PCB Pattern
A' E F E
Unit : mm A 10.5 Max. G 1.4±0.2 B 10±0.5 H 155±0.2 C 4.5 Max. L 0.7±0.2 D 3.0±0.2 X 7.40 Ref. E 1.2±0.2 Y 1.70 Ref. F 7.7±0.5 Z 3.60 Ref.
3. SCHEMATIC :
4. MATERIALS : a b c (a) Core : Ferrite Core (b) Wire : Enamelled Copper Wire (c) Adhesive : Epoxy (d) Adhesive : Epoxy d e (e) Clip : Tin Clip
NOTE : Specifications subject to change without notice. Please check our website for latest information. 18.04.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 1
Z
SMD Power Inductors (Lead Free)
PDC1045C SERIES
5. GENERAL SPECIFICATION : a) Test Frequency : 100KHz/0.25Vdc b) Ambient Temp. : 20°C c) Irms(A) : Will cause coil temperature to rise T 70% L0 L : test inductance with DC current L0 : the initial inductance without DC current
1. Ambient temp : 25°C 2. Applied Current : DC Current, the current shall be step by step increase to the load component.
NOTE : Specifications subject to change without notice. Please check our website for latest information. 18.04.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 4
SMD Power Inductors (Lead Free)
REFLOW SOLDERING CONDITION
PDC1045C SERIES
5sec max.
260°C max. 230°C
150~180°C
30sec max. 90~120sec
Reflow times : 2 times max.
9. PACKAGING INFORMATION : 9-1. Reel Dimension
C
G
N
Type 13" x 24mm
A(mm) 330
C(mm) 24.5±0.5
G(mm) 13.5±0.5
N(mm) 100±1.0
A
9-2 Tape Dimension / 12mm
2±0.1 4±0.1 1.5 +0.25 1.75±0.1 t
F W
7.5
1.22
P Ao
1.5 +0.25
Ko
Series PDC1045C
Ao(mm)
Bo(mm)
Ko(mm) 4.6±0.1
P(mm) 16.0±0.1
W(mm) 24±0.3
F(mm) 11.5±0.1
t(mm) 0.4±0.05
10.65±0.1 10.65±0.1
Trailer edge
Components
Empty pockets
Leader edge
Direction Feed
More than 100mm
More than 400mm
NOTE : Specifications subject to change without notice. Please check our website for latest information. 18.04.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 5
Bo
SMD Power Inductors (Lead Free)
PDC1045C SERIES
9-3. Packaging Quantity Size Chip / Reel Inner Box Carton PDC1045C 1000 2000 8000
9-4. Tearing Off Force F
165° to 180°
The force for tearing off cover tape is 10 to 125 grams in the arrow direction under the following conditions.
Room Temp. (°C) 5~35 Room Humidity (%) 45~85 Room atm (hPa) 860~1060 Tearing Speed (mm/min) 300
Top cover tape
Base tape
Application Notice
1. Storage Conditions : To maintain the solderabililty of terminal electrodes : a) Temperature and humidity conditions : Less than 40°C and 70% RH. b) Recommended products should be used within 6 months from the time of delivery. c) The packaging material should be kept where no chlorine or sulfur exists in the air. 2. Transportation : a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized.
NOTE : Specifications subject to change without notice. Please check our website for latest information. 18.04.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 6
