SPB07038R2YZF-99

SMD POWER INDUCTORS 1. PART NO. EXPRESSION : SPB0703 SERIES (e) Z : Standard part (f) F : RoHS Compliant (g) 11 ~ 99 : Internal controlled number SPB0703100MZF(a) (b) (c) (d)(e)(f) (g) (a) Series code (b) Dimension code (c) Inductance code : 100 = 10uH (d) Tolerance code : M = ±20%, Y = ±30% 2. CONFIGURATION & DIMENSIONS : A C 0.90 E F 4.30 D1 2 1 3 D B 0.90 4 1.45 1.45 PCB Pattern White dot on Pin 1 side A B C D 2.70 Ref. D1 0.70 Ref. E 1.25 Ref. Unit:m/m F 4.50 Ref. 7.30±0.20 7.30±0.20 3.50 Max. 3. SCHEMATIC : 1 N1 3 " " Polarity N2 4 3 ( Parallel ) 2 1 N1 N2 4 2 1 N1 3 ( Series ) 2 N2 4 4. MATERIALS : (a) Core : DR Ferrite Core h a d g b e (b) Core : RI Ferrite Core (c) Base : LCP-E4008 (d) Wire : Enamelled Copper Wire (e) Tape : #56 (f) Terminal : Tinned Copper Plate f c (g) Adhesive : Epoxy Resin (h) Ink : Bon Marque NOTE : Specifications subject to change without notice. Please check our website for latest information. 2.9 100 20.07.2011 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 SMD POWER INDUCTORS 5. GENERAL SPECIFICATION : a) L/L0A : 30% Typ. at Isat b) Temp. Rise : 40°C Typ. at Irms c) Hi-Pot (N1-N2) : 200Vac / 3mA / 1sec d) Operating temp. : -40°C to +125°C e) Storage temp. : -40°C to +125°C f) Resistance to solder heat : 260°C.10secs SPB0703 SERIES 6. ELECTRICAL CHARACTERISTICS : Inductance ( µH ) Ref. 1.00 1.50 2.20 3.30 4.70 6.80 8.20 10.0 15.0 22.0 33.0 47.0 68.0 82.0 100 150 220 330 470 680 820 1000 Test Frequency ( Hz ) 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K Inductance ( µH ) Ref. 0.992 1.482 2.070 3.540 4.422 6.480 8.930 10.30 15.01 22.65 34.41 48.62 69.91 80.37 101.4 150.9 223.3 325.5 465.8 676.5 821.7 995.0 Parallel RDC Isat () (A) Max. 0.0104 0.0130 0.0210 0.0283 0.0366 0.0558 0.0591 0.0800 0.1099 0.1620 0.2300 0.3156 0.4404 0.5772 0.8352 1.5360 1.6608 2.6952 3.3504 5.3967 6.0912 9.3492 7.97 6.52 5.52 4.22 3.78 3.12 2.66 2.47 2.05 1.67 1.35 1.14 0.96 0.89 0.79 0.65 0.53 0.44 0.37 0.31 0.28 0.25 Series Irms (A) 5.25 4.64 4.11 3.31 3.09 2.55 2.19 2.08 1.83 1.62 1.31 1.03 0.89 0.71 0.63 0.50 0.47 0.37 0.34 0.25 0.23 0.19 Inductance ( µH ) Ref. 3.968 5.928 8.280 14.16 17.69 25.92 35.72 41.20 60.04 90.60 137.6 194.5 275.6 321.5 405.6 603.6 893.2 1302 1863 2706 3287 3980 RDC () Max. 0.0430 0.0494 0.0676 0.1148 0.1561 0.2292 0.2390 0.3276 0.4380 0.6528 0.9180 1.2552 1.7532 2.3418 3.3912 6.0516 6.7212 10.670 13.704 21.297 24.312 37.008 Isat (A) 3.99 3.26 2.76 2.11 1.89 1.56 1.33 1.24 1.03 0.83 0.68 0.57 0.48 0.44 0.39 0.32 0.27 0.22 0.18 0.15 0.14 0.13 Irms (A) 2.630 2.320 2.060 1.660 1.550 1.280 1.100 1.040 0.916 0.811 0.653 0.500 0.444 0.351 0.312 0.245 0.232 0.185 0.168 0.123 0.112 0.093 Part No. SPB07031R0YZFSPB07031R5YZFSPB07032R2YZFSPB07033R3YZFSPB07034R7YZFSPB07036R8YZFSPB07038R2YZFSPB0703100MZFSPB0703150MZFSPB0703220MZFSPB0703330MZFSPB0703470MZFSPB0703680MZFSPB0703820MZFSPB0703101MZFSPB0703151MZFSPB0703221MZFSPB0703331MZFSPB0703471MZFSPB0703681MZFSPB0703821MZFSPB0703102MZFTolerance code : M = ±20% Y = ±30% NOTE : Specifications subject to change without notice. Please check our website for latest information. 20.07.2011 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 SMD POWER INDUCTORS 7. CHARACTERISTICS CURVES : ( PARALLEL ) SPB0703 SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. 20.07.2011 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 SMD POWER INDUCTORS 7. CHARACTERISTICS CURVES : ( SERIES ) SPB0703 SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. 20.07.2011 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 SMD POWER INDUCTORS SPB0703 SERIES 10s max. RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERINGS 255°C 230°C 180°C 150°C Pre-heating 40s max. Natural cooling 90 to 120s 8. PACKAGING INFORMATION : ( 1 ) CONFIGURATION T COVER TAPE 2.0±0.5 ØC ØC N A B D G EMBOSSED CARRIER * CARRIER TAPE WIDTH : D P:12 m/m 4 m/m 100 ( 2 ) DIMENSIONS STYLE 13-16 A 330 B ( 3 ) Q'TY & G.W. PER PACKAGE SERIES SPB0703 Q'TY (PCS) 1350 21±0.8 INNER : REEL G.W. (Kg 1.115 STYLE 13-16 NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5 100 C 13 100 D 16 Q'TY (PCS) 8100 OUTER : CARTON G.W. (Kg) 8.40 SIZE (cm) 38 x 36.5 x 21 100 G 18 +0 100 Unit:m/m N 50 -0 T 22.4 20.07.2011 SMD POWER INDUCTORS 9. RELIABILTY AND TEST CONDITION : SPB0703 SERIES TEST CONDITION PREHEAT : 125±25°C FOR 60 SECONDS SOLDER : 99%Sn/0.3%Ag/0.7%Cu OR EQUIVALENT SOLDER TEMP. : 245±5°C FLUX : ROSIN DIP TIME : 4±1 SECONDS TEST ITEM SOLDERABILITY SPECIFICATION MORE THAN 90% OF THE TERMINAL ELECTRODE SHALL BE COVERED WITH FRESH SOLDER. THERMAL SHOCK TEST INDUCTANCE SHALL NOT CHANGE MORE THAN ±20% ROOM TEMP. 15 MINUTES -25±2°C 30 MINUTES ( TEMP. CYCLE ) ROOM TEMP. 15 MINUTES TOTAL : 50 CYCLES 85±2°C 30 MINUTES HUMIDITY RESISTANCE TEST TEMPERATURE : 40±2°C HUMIDITY : 90 ~ 95% APPLIED CURRENT : PER SPEC. TIME : 500 HOURS HIGH TEMP. RESISTANCE TEST TEMPERATURE : 85±2°C APPLIED CURRENT : PER SPEC. TIME : 500 HOURS 10. UL CARD : GUANGDONG CHINA Mtl Dsg BC Coating Type TC __ __ __ ANSI Type __ TI NOTE : Specifications subject to change without notice. Please check our website for latest information. 20.07.2011 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 6 SMD POWER INDUCTORS 10. UL CARD : SPB0703 SERIES E54705 (M) RTI H D Min UL94 Elec Mech H H V 4 C T Thk Flame with W 9 T w/o A R mm Class Imp 5 I Mtl Dsg Col Imp I I Liquid crystal plyester (LCP), designated "EKONOL" or "SUMIKASUPER", furnished in the form of pellets, (Contd) E4008 , E400X NC , BK 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 130 130 130 130 130 220 220 220 130 220 220 220 130 130 130 130 130 130 130 130 130 130 130 130 130 180 200 200 130 180 200 200 130 130 130 130 130 130 130 130 130 130 130 130 130 220 240 240 130 220 240 240 130 130 130 130 130 130 130 130 ___ ___ 3 2 1 ___ 3 2 1 ___ 3 2 1 ___ 3 2 1 ___ 0 0 1 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ E4008 NC , WT , BK 4 ___ ___ ___ 4 ___ ___ ___ 4 ___ ___ ___ 4 ___ ___ ___ 4 E4010 NC , BK E400(Y)L , E4008L NC , BK E4810 NC , BK TERAOKA SEISAKUSHO CO LTD 4-22 1-CHOME HIROMACHI SHINAGAWA-KU, TOKYO JAPAN E56086 (S) Flame returdant aramid paper tape, Cat. Nos. 512F+, 560F+, 565S+, 681S+. Flame returdant aramid paper tape, Cat. Nos. 560S+, 561S+, 562S+, rated 200 C. Flame returdant acetate cloth tape, Cat. Nos. 570F+, 571F+, 573F+. Flame returdant polyester film tape, Cat. Nos. 680F+, 684F. Flame returdant glass cloth tape, Cat. Nos. 510F+, 540S+, 541F+, 685S+. Flame returdant glass cloth tape, Cat. No. 54S, rated 200 C. Flame returdant cotton cloth tape, Cat. Nos. 590F+, 715F+. Flame returdant polyimide film tape, Cat. No. 650S+, rated 200 C. Flame returdant tellon tape, Cat. Nos. 841+, 846+. Flame returdant PVC tape, Cat. Nos. 305F+, 307F+, 380F+. Flame returdant polyester fiber tape, Cat. Nos. 511F+, 551F+. Flame returdant epoxy varnish impregnated polyester web tape, Cat. Nos. 530F+. Flame returdant epoxy varnish impregnated glass paper tape, Cat. No. 531F+. Flame returdant copper foil tape, Cat. No. 831S+. Flame returdant copper foil tape, Cat. No. 8321+. Flame returdant alumlnum foil tape, Cat. Nos. 833+, 834+. Epoxy varnish impregnated polyester non-woven fabric tape, cat. no. 530F°rated 150 C. polyester film tape, Cat. Nos. 631S°, 632S, rated 130 C. Flame returdant polyester film tape, Cat. No. 630F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber tape Cat. No. 673F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber/polyester film tape, Cat. No. 850F°, rated 130 C. + - Subjected to Flame Retardant tests only. °- Complies with Flame Retardent requirements when so marked. Mraking: Company name or "E56086" and catalog designation and "Flame Retardent" if applice, bie. brinted on the central paper or outer package. NOTE : Specifications subject to change without notice. Please check our website for latest information. 20.07.2011 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 7