TN2425N8

TN2425 Low Threshold N-Channel Enhancement-Mode Vertical DMOS FETs Ordering Information BVDSS / BVDGS 250V * Same as SOT-89. RDS(ON) (max) 3.5Ω ID(ON) (min) 1.5A Order Number / Package TO-243AA* TN2425N8 DIE TN2425ND Product marking for TO-243AA: TN4C❋ where ❋ = 2-week alpha date code Product supplied on 2000 piece carrier tape reels. Features ❏ Low threshold ❏ High input impedance ❏ Low input capacitance ❏ Fast switching speeds ❏ Low on resistance ❏ Free from secondary breakdown ❏ Low input and output leakage ❏ Complementary N- and P-channel devices Low Threshold DMOS Technology These low threshold enhancement-mode (normally-off) transistors utilize a vertical DMOS structure and Supertex's well-proven silicon-gate manufacturing process. This combination produces devices with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, these devices are free from thermal runaway and thermally induced secondary breakdown. Supertex vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where very low threshold voltage, high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. Applications ❏ Logic level interfaces – ideal for TTL and CMOS ❏ Solid state relays ❏ Photo voltaic drives ❏ Analog switches ❏ General purpose line drivers ❏ Telecom switches Package Option D G Absolute Maximum Ratings Drain-to-Source Voltage Drain-to-Gate Voltage Gate-to-Source Voltage Operating and Storage Temperature Soldering Temperature* * Distance of 1.6 mm from case for 10 seconds. BVDSS BVDGS ± 20V -55°C to +150°C 300°C D S TO-243AA (SOT-89) Note: See Package Outline section for dimensions. 11/12/01 Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website. 1 TN2425 Thermal Characteristics Package TO-243AA † ID (continuous)* 480mA ID (pulsed) 1.9A Power Dissipation @ TA = 25°C 1.6W† θjc θja IDR* 480mA IDRM 1.9A °C/W 15 °C/W 78† * ID (continuous) is limited by max rated Tj. Mounted on FR5 board, 25mm x 25mm x 1.57mm. Significant PD increase possible on ceramic substrate. Electrical Characteristics (@ 25°C unless otherwise specified) Symbol BVDSS VGS(th) ∆VGS(th) IGSS IDSS Parameter Drain-to-Source Breakdown Voltage Gate Threshold Voltage Change in VGS(th) with Temperature Gate Body Leakage Zero Gate Voltage Drain Current Min 250 0.8 Typ Max Unit V V mV/°C nA µA mA Conditions VGS = 0V, ID = 250µA VGS = VDS, ID= 1.0mA VGS = VDS, ID= 1.0mA VGS = ± 20V, VDS = 0V VGS = 0V, VDS = Max Rating VGS = 0V, VDS = 0.8 Max Rating TA = 125°C VGS = 4.5V, VDS = 25V VGS = 10V, VDS = 25V VGS = 3.0V, ID = 150mA VGS = 4.5V, ID = 250mA VGS = 10V, ID = 0.5A VGS = 10V, ID = 0.5A VDS = 25V, ID = 250mA VGS = 0V, VDS = 25V f = 1.0MHz VDD = 25V, ID = 500mA RGEN = 25Ω VGS = 0V, ISD = 500mA VGS = 0V, ISD = 500mA -5.5 100 10 1.0 0.8 1.5 6.0 5.0 3.5 1.7 500 105 25 7 5 10 25 5 300 200 100 40 15 25 35 15 1.5 ID(ON) RDS(ON) ON-State Drain Current Static Drain-to-Source ON-State Resistance Change in RDS(ON) with Temperature Forward Transconductance Input Capacitance Common Source Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage Drop Reverse Recovery Time A Ω %/°C m pF ns V ns Notes: 1.All D.C. parameters 100% tested at 25°C unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.) 2.All A.C. parameters sample tested. Switching Waveforms and Test Circuit 10V 90% INPUT 0V PULSE GENERATOR Rgen 10% t(ON) t(OFF) tr td(OFF) tF td(ON) VDD 10% 10% INPUT OUTPUT 0V 90% 90% 2 Ω ∆RDS(ON) GFS CISS COSS CRSS td(ON) tr td(OFF) tf VSD trr VDD RL OUTPUT D.U.T. TN2425 Typical Performance Curves Output Characteristics 5 3.0 Saturation Characteristics VGS = 10V 8V 6V 5V 4 2.5 ID (Amperes) ID (Amperes) VGS = 10V 8V 6V 5V 2.0 4V 1.5 3 2 4V 1.0 3V 1 3V 2.5V 0 0 10 20 30 40 50 0.5 2.5V 0.0 0 2 4 6 8 10 VDS (Volts) Transconductance vs. Drain Current 1.0 T A =-55 ° C 0.8 V DS =15V 2.0 VDS (Volts) Power Dissipation vs. Case Temperature TO-243AA 1.5 T A =25 ° C GFS (siemens) 0.6 T A =125 ° C 0.4 PD (Watts) 1.0 0.5 0.2 0.0 0.0 0.0 0.5 1.0 1.5 2.0 0 25 50 75 100 125 150 ID (Amperes) Maximum Rated Safe Operating Area 10 TO-243AA (pulsed) 1.0 1.0 TC (°C) Thermal Response Characteristics Thermal Resistance (normalized) TO-243AA P D = 1.6W T C = 2 5 °C 0.8 ID (amperes) TO-243AA (DC) 0.6 0.1 0.4 0.01 T A =25 ° C 0.2 0.001 1 10 100 1000 0 0.001 0.01 0.1 1.0 10 VDS (Volts) tp (seconds) 3 TN2425 Typical Performance Curves BVDSS Variation with Temperature 1.2 BV @ 250µA 10 On Resistance vs. Drain Current BVDSS (Normalized) 8 VGS = 4.5V RDS(ON) (ohms) 1.1 6 1.0 4 VGS = 10V 0.9 2 0.8 -50 0 0 50 100 150 0 1 2 3 4 5 TJ (°C) Transfer Characteristics 3.0 TA = 25°C ID (Amperes) VGS(TH) and RDS(ON) w/ Temperature 2.0 1.8 RDS(ON) @ 10V, 0.5A 1.8 1.6 1.4 1.2 1.0 0.8 VGS(th) @ 1mA 1.5 2.0 TA = -55°C 1.5 TA = 125°C 1.2 1.0 0.9 0.5 VDS = 25V 0.6 0.4 -50 0 50 100 0.6 150 0.0 0 2 4 6 8 10 VGS (Volts) Capacitance vs. Drain Source Voltage 200 f = 1MHz TJ (°C) Gate Drive Dynamic Characteristics 10 ID = 480mA 8 150 VDS=10V C (picofarads) VGS (volts) CISS 100 6 VDS=40V 453pF 4 50 COSS CRSS 0 0 10 20 30 40 50 2 128pF 0 0.0 1.0 2.0 3.0 4.0 5.0 VDS (Volts) QG (nanocoulombs) RDS(ON) (normalized) 11/12/01 VGS(th) (normalized) 2.5 ID (Amperes) ©2001 Supertex Inc. All rights reserved. Unauthorized use or reproduction prohibited. 4 1235 Bordeaux Drive, Sunnyvale, CA 94089 TEL: (408) 744-0100 • FAX: (408) 222-4895 www.supertex.com