VN4012L

VN3515L VN4012L N-Channel Enhancement-Mode Vertical DMOS FETs Ordering Information BVDSS / BVDGS 350V 400V RDS(ON) (max) 15Ω 12Ω VGS(th) (max) 1.8V 1.8V ID(ON) (min) 0.15A 0.15A Order Number / Package TO-92 VN3515L VN4012L Features ❏ Free from secondary breakdown ❏ Low power drive requirement ❏ Ease of paralleling ❏ Low CISS and fast switching speeds ❏ Excellent thermal stability ❏ Integral Source-Drain diode ❏ High input impedance and high gain ❏ Complementary N- and P-channel devices Advanced DMOS Technology These enhancement-mode (normally-off) transistors utilize a vertical DMOS structure and Supertex's well-proven silicon-gate manufacturing process. This combination produces devices with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, these devices are free from thermal runaway and thermally-induced secondary breakdown. Supertex’s vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. Applications ❏ Motor controls ❏ Converters ❏ Amplifiers ❏ Telecom Switching ❏ Power supply circuits ❏ Drivers (relays, hammers, solenoids, lamps, memories, displays, bipolar transistors, etc.) Package Option Absolute Maximum Ratings Drain-to-Source Voltage Drain-to-Gate Voltage Gate-to-Source Voltage Operating and Storage Temperature Soldering Temperature* * Distance of 1.6 mm from case for 10 seconds. Note: See Package Outline section for dimensions. BVDSS BVDGS ± 20V -55°C to +150°C 300°C SGD TO-92 11/12/01 Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website. 1 VN3515L/VN4012L Thermal Characteristics Package VN3515L (TO-92) VN4012L (TO-92) * ID (continuous)* 150mA 160mA ID (pulsed) 600mA 650mA Power Dissipation @ TC = 25°C 1W 1W θjc θja IDR* 150mA 160mA IDRM 600mA 650mA °C/W 125 125 °C/W 170 170 ID (continuous) is limited by max rated Tj. Electrical Characteristics (@ 25°C unless otherwise specified) Symbol BVDSS VGS(th) IGSS IDSS Parameter Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate Body Leakage Zero Gate Voltage Drain Current VN3515 VN4012 Min 350 400 0.6 1.8 10 1 100 ID(ON) RDS(ON) ON-State Drain Current Static Drain-to-Source ON-State Resistance VN3515 VN4012 GFS CISS COSS CRSS td(ON) tr td(OFF) tf VSD Forward Transconductance Input Capacitance Common Source Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage Drop 125 0.15 0.3 9.5 17 9.5 17 350 110 30 10 20 20 65 65 1.2 V VGS = 0V, ISD = 160mA ns VDD = 25V ID = 100mA RGEN = 25Ω pF VDS = 25V, VGS = 0V f = 1MHz 15 35 12 30 m Ω µA A V nA Typ Max Unit V Conditions VGS = 0V, ID = 100µA VGS = VDS, ID = 1mA VGS = ± 20V, VDS = 0V VGS = 0V, VDS = 0.8 Max Rating VGS = 0V, VDS = 0.8 Max Rating TA = 125°C VDS = 10V, VGS = 4.5V VGS = 4.5V, ID = 100mA VGS = 4.5V, ID = 100mA, TA = 125°C VGS = 4.5V, ID = 100mA VGS = 4.5V, ID = 100mA, TA = 125°C VDS =15V, ID = 100mA Notes: 1. All D.C. parameters 100% tested at 25°C unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. 3. See TN2540 data sheet for characteristic curves. Switching Waveforms and Test Circuit 10V 90% INPUT 0V PULSE GENERATOR Rgen 10% t(ON) t(OFF) tr td(OFF) tF td(ON) VDD 10% 10% INPUT OUTPUT 0V 90% 90% ©2001 Supertex Inc. All rights reserved. Unauthorized use or reproduction prohibited. 2 1235 Bordeaux Drive, Sunnyvale, CA 94089 TEL: (408) 744-0100 • FAX: (408) 222-4895 www.supertex.com Ω VDD RL OUTPUT D.U.T. 11/12/01