1.5KE6.8A

1.5KE6.8 THRU 1.5KE440CA GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPESSOR Breakdown Voltage:6.8-440 Volts DO-201AD Pesk Pulse Power:1500 Watts FEATURE 1.0(25.4) MIN. 0.210 (5.3) 0.190(4.8) DIA. 0.375(9.5) 0.265(7.2) 1500w peak pulse power capability Excellent clamping capability Low incremental surge resistance Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. High temperature soldering guaranteed: 265 C/10S/9.5mm lead length at 5 lbs tension MECHANICAL DATA 0.042 (1.07) 0.038 (0.96) DIA. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) Case: JEDEC DO-201AD molded plastic body over passivated junction Terminals: Plated axial leads, solderable per MIL-STD 750 method 2026 Polarity: Color band denotes cathode except for bidirectional types Mounting Position: Any Weight: 0.04 ounce,1.10 grams DEVICES FOR BIDIRECTIONAL APPLICATIONS For bidirectional use C or CA suffix for types 1.5KE6.8 thru types 1.5KE440 (e.g. 1.5KE6.8CA,1.5KE440CA). Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. SYMBOLS Peak power dissipation Peak polse reverse current (Note 1) (Note 1, Fig.1) PPPM IPPM PM(AV) IFSM VF TSTG,TJ VALUE Minimum 1500 See Table 1 5.0 200 3.5/5.0 -55 to + 175 UNITS Watts Amps Watts Amps Volts C Steady state power dissapation (Note 2) Peak forward surge current (Note 3) Maximum instantaneous forward voltage at 100A for unidirectional only (Note 4) Operating junction and storage temperature range Notes: 1.10/1000ms waveform non-repetitive current pulse,per Fig.3 and derated above Ta=25 C per Fig.2 2.TL=75 C,lead lengths 9.5mm,Mounted on copper pad atea of (20x20mm)Fig.5 3.Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum. 4.VF=3.5V max.for devices of V(BR)200V www.shunyegroup.com ELECTRICAL CHARACTERISTICS (at TA=25 C unless otherwise noted) Breakdown Voltage V(BR) (Volts)(NOTES 1) MIN 1.5KE6.8 1.5KE6.8A 1.5KE7.5 1.5KE7.5A 1.5KE8.2 1.5KE8.2A 1.5KE9.1 1.5KE9.1A 1.5KE10 1.5KE10A 1.5KE11 1.5KE11A 1.5KE12 1.5KE12A 1.5KE13 1.5KE13A 1.5KE15 1.5KE15A 1.5KE16 1.5KE16A 1.5KE18 1.5KE18A 1.5KE20 1.5KE20A 1.5KE22 1.5KE22A 1.5KE24 1.5KE24A 1.5KE27 1.5KE27A 1.5KE30 1.5KE30A 1.5KE33 1.5KE33A 1.5KE36 1.5KE36A 1.5KE39 1.5KE39A 1.5KE43 1.5KE43A 1.5KE47 1.5KE47A 1.5KE51 1.5KE51A 1.5KE56 1.5KE56A 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 Device Type MAX 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 Maximum Maximum Stand-off Reverse Test Peak Puls Voltage Leakage Current Reverse Current VWM atVWM IT(mA) IPPM(NOTE2) (Volts) ID(NOTE3)(mA) (Amps) 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 1000.0 1000.0 500.0 500.0 200.0 200.0 50.0 50.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 50. 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 139 143 128 133 120 124 109 112 100 103 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 59.5 51.5 54.2 47.0 49.0 43.2 45.2 38.4 40.0 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 22.1 23.1 20.4 21.4 18.6 19.5 Maximum Maximum Clamping Temperature Voltage at Coefficient IPPM of V(BR) Vc(Volts) (%/ C) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 www.shunyegroup.com ELECTRICAL CHARACTERISTICS (at TA=25 C unless otherwise noted) Breakdown Voltage V(BR) (Volts)(NOTES 1) MIN 1.5KE62 1.5KE62A 1.5KE68 1.5KE68A 1.5KE75 1.5KE75A 1.5KE82 1.5KE82A 1.5KE91 1.5KE91A 1.5KE100 1.5KE100A 1.5KE110 1.5KE110A 1.5KE120 1.5KE120A 1.5KE130 1.5KE130A 1.5KE150 1.5KE150A 1.5KE160 1.5KE160A 1.5KE170 1.5KE170A 1.5KE180 1.5KE180A 1.5KE200 1.5KE200A 1.5KE220 1.5KE220A 1.5KE250 1.5KE250A 1.5KE300 1.5KE300A 1.5KE350 1.5KE350A 1.5KE400 1.5KE400A 1.5KE440 1.5KE440A 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 225 237 270 285 315 332 360 380 396 418 Device Type MAX 66.8 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 330 315 385 368 440 420 484 462 Maximum Maximum Stand-off Reverse Test Peak Puls Voltage Leakage Current Reverse Current VWM atVWM IT(mA) IPPM(NOTE2) (Volts) ID(NOTE3)(mA) (Amps) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 16.9 17.6 15.3 16.3 13.9 14.6 12.7 13.3 11.5 12.0 10.4 10.9 9.5 9.9 8.7 9.1 8.0 8.4 7.0 7.2 6.5 6.8 6.1 6.4 5.8 6.1 5.2 5.5 4.4 4.6 4.2 4.4 3.5 3.6 3.0 3.1 2.6 2.7 2.4 2.5 Maximum Maximum Clamping Temperature Voltage at Coefficient IPPM of V(BR) Vc(Volts) (%/ C) 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 NOTES: 1.V(BR)measured after IT applied for 300ms,IT=square wave pulse or equivalent 2.Surge current waveform per Fig.3 and derated per Fig.2 3.For bidirectional types having VWM of 10 volts and less,the ID linit is doubled 4.All items and symbols are consistent with ANSI/IEEE C62.35 www.shunyegroup.com RATINGS AND CHARACTERISTIC CURVES 1.5KE6.8 THUR 1.5KE440CA 100 PEAK PULSE POWER(PppM)or CURRENT(IppM) DERATING IN PERCENTAGE,% FIG. 1-PEAK PULSE POWER RATING CURVE PppM,PEAK PULSE POWER,kw FIG. 2-PULSE DERATING CURVE 100 10 75 1.0 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 TA=25 C 50 25 0.1 0.1ms 1.0ms 10ms 100ms 1.0ms 10ms td,PULSE WIDTH,sec. FIG.3-PULSE WAVEFORM 150 0 0 25 50 75 100 125 150 175 200 IppM,PEAK PULSE CURRENT,% tr=10msec PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IppM TA, AMBIENT TEMPERATURE,( C) PEAK VALUE IppM 100 10,000 FIG. 4-TYPICAL JUNCTIONAL CAPACITANCE UNIDIRECTIONAL UNIDIRECTIONAL---BIDIRECTIONAL CJ,JINCTION CAPACITANCE,pF HALF VALUE IPPM 2 10/1000msec WAVEFORM as DFINED by R.E.A. 50 VR=0 1,000 0 0 td 1.0 2.0 3.0 4.0 f=1.0MHz Vsig=50mVp-p TJ=25 C 100 t,TIME,ms FIG.5-STEADY STATE POWER DERATING CURVE 5.00 VR=RATED STAND-OFF VOLTAGE 10 5 10 100 500 PM(AV),STEADY STATE POWER DISSIPATION,WATTS L=0.375” (9.5mm) lLEAD LENGTHS 3.75 60Hz RESISTIVE OR INDUCTIVE LOAD V(BR),BREAKDOWN VOLTAGE,VOLTS 2.50 1.6 1.6 0.040” (40 40 1mm) COPPER HEAT SINKS 1.25 0 0 25 50 75 100 125 150 175 200 IFSM,PEAK FORWARD SURAGE CURRENT AMPERES FIG.6-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 200 TL,LEAD TEMPERATURE, C INSTANTANEOUS REVERSE LEAKAGE CURRENT,MICROAMPERES FIG.7-TYPICAL REVERSE LEAKAGE CHARCTERISTICS 1000 100 100 10 MEASURED AT DEVICES STAND-OFF VOLTAGE,Vwm 1 TJ=TJmax. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 10 1.0 10 100 TA=25 C 0.1 NUMBER OF CYCLES AT 60Hz 0.01 0.001 0 100 200 300 400 500 V(BR),BREAKDOWN VOLTAGE,VOLTS www.shunyegroup.com