NSL510

NSL510 5.0Amp Surface Mounted Rectifiers DO-214AA/SMB FEATURE Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low profile package Built-in strain relief Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage high frequency inverters, free wheeling, and polarity protection applications Guard ring for over voltage protection High temperature soldering guaranteed: 250ºC /10 seconds at terminals 0.155(3.94) 0.130(3.30) 0.086 (2.20) 0.071 (1.80) 0.185(4.70) 0.160(4.06) 0.012(0.305) 0.006(0.152) 0.096(2.44) 0.084(2.13) 0.060(1.52) 0.030(0.76) MECHANICAL DATA 0.008(0.203)MAX. 0.220(5.59) 0.200(5.08) Dimensions in inches and (millimeters) Case:JEDECDO-214AA SMB moldedplasticbody Terminals: Solder plated, solder able per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS single-phase, half-wave, 60HZ, resistive or inductive lo ad rating at 25ºC, unless otherwise stated, for capacitive load, derate current by 20% SYMBOL Parameter NSL510 Units Maximum Recurrent Peak Reverse Voltage Vrrm 100 V Maximum RMS Voltage Vrms 70 V Maximum DC blocking Voltage Vdc 100 V Maximum Average Forward Rectified Current If(av) 5.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage atrated Forward current (Note 1) Ifsm 100.0 A Vf 0.97 V Ir 0.2 20 uA Rth(ja) 50.0 ℃/W Maximum DC Reverse Current at rated DC blocking voltage Typical Thermal Resistance Ta =25℃ Ta =100℃ (Note 2) StorageandOperatingTemperatureRangeTstg,T Note: -55 ~ +175 ℃ 1. Pulse test: 300µs pulse width, 1% duty cycle 2. P.C.B. mounted with 0.2 x 0.2inches (5.0 x 5.0mm) copper pad areas www.shunyegroup.com.cn 1/2 NSL510 5.0Amp Surface Mounted Rectifiers RATINGS AND CHARACTERISTIC CURVES FIG.2: MAXIMUM NON-REPETITIVE FORWARD URGE CURRENT IFSM(A) ︶ IO(A FIG.1 : FORWARD CURRENT DERATING CURVE 5.0 150 125 4.0 TL=75℃ 8.3ms Single Half Sine Wave 100 3.0 75 2.0 S 0 . 1 0 25 0 0 1 0 50 ingle Phase Half Wave 60HZ Resisteve or Inductive Load 0.375''(9.5mm) Lead Length 50 150 Ta(℃) 0 1 10 FIG.4:TYPICAL REVERSE CHARACTERISTICS 20 IR(uA) IF(A) TYPICAL FORWARD CHARACTERISTICS 10 1000 100 4.0 2.0 Tj=125℃ 10 1.0 0.4 Tj=100℃ 1.0 0.2 0.1 Tj=25℃ TJ=25℃ Pulse width=300us 1% Duty Cycle 0.02 0.01 0.6 100 Number of Cycles 0.8 1.0 1.2 1.4 1.6 1.8 0.1 0.01 0 2.0 20 40 60 100 80 Voltage(%) VF(V) FIG.5: Diagram of circuit and Testing wave form of reverse recovery time I D trr IF VR IF RL t 0 IRR IR www.shunyegroup.com.cn 2/2