NSS510

NSS510 5.0Amp Surface Mounted Rectifiers DO-214AA/SMB FEATURE Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low profile package Built-in strain relief Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage high frequency inverters, free wheeling, and polarity protection applications Guard ring for over voltage protection High temperature soldering guaranteed: 250ºC /10 seconds at terminals 0.155(3.94) 0.130(3.30) 0.086 (2.20) 0.071 (1.80) 0.185(4.70) 0.160(4.06) 0.012(0.305) 0.006(0.152) 0.096(2.44) 0.084(2.13) 0.060(1.52) 0.030(0.76) 0.008(0.203)MAX. 0.220(5.59) 0.200(5.08) MECHANICAL DATA Case:JEDECDO-214AA SMB moldedplasticbody Terminals: Solder plated, solder able per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS single-phase, half-wave, 60HZ, resistive or inductive lo ad rating at 25ºC, unless otherwise stated, for capacitive load, derate current by 20% SYMBOL NSS510 Units Maximum Recurrent Peak Reverse Voltage Vrrm 100 V Maximum RMS Voltage Vrms 70 V Maximum DC blocking Voltage Vdc 100 V Maximum Average Forward Rectified Current If(av) 5.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage atrated Forward current (Note 1) Ifsm 120.0 A Vf 0.92 V Ir 0.02 0.5 uA Rth(ja) 50.0 ℃/W Maximum DC Reverse Current at rated DC blocking voltage Typical Thermal Resistance Ta =25℃ Ta =100℃ (Note 2) StorageandOperatingTemperatureRangeTstg,T ℃ -55 ~ +175 Note: 1. Pulse test: 300µs pulse width, 1% duty cycle 2. P.C.B. mounted with 0.2 x 0.2inches (5.0 x 5.0mm) copper pad areas www.shunyegroup.com.cn 1/2 NSS510 5.0Amp Surface Mounted Rectifiers RATINGS AND CHARACTERISTIC CURVES FIG.2: MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT IFSM(A) ︶ IO(A FIG.1 : FORWARD CURRENT DERATING CURVE 5.0 160 120 4.0 8.3ms Single Half Sine Wave JEDEC Method 3.0 80 2.0 S 0 . 1 0 40 ingle Phase Half Wave 60HZ Resisteve or Inductive Load 0.375''(9.5mm) Lead Length 0 120 60 0 180 Ta(℃) 1 2 100 FIG.4:TYPICAL REVERSE CHARACTERISTICS IR(uA) 20 10 1000 100 4.0 2.0 Tj=125℃ 10 1.0 0.4 Tj=100℃ 1.0 0.2 0.1 Tj=25℃ TJ=25℃ Pulse width=300us 1% Duty Cycle 0.02 0.01 0.6 20 Number of Cycles TYPICAL FORWARD CHARACTERISTICS IF(A) 10 0.8 1.0 1.2 1.4 1.6 1.8 0.1 0.01 0 2.0 20 40 60 100 80 Voltage(%) VF(V) FIG.5: Diagram of circuit and Testing wave form of reverse recovery time I D trr IF VR IF RL t 0 IRR IR www.shunyegroup.com.cn 2/2