RS5MB

RS5A~RS5M 5.0Amp Fast Recovery Surface Mounted Rectifiers Features DO-214AA/SMB The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Idea for printed circuit board 0.155(3.94) 0.130(3.30) 0.087 (2.20) 0.071 (1.80) Glass passivated Junction chip Low reverse leakage High forward surge current capability 0.180(4.57) 0.160(4.06) High temperature soldering guaranteed 250 C/10 seconds at terminals 0.012(0.305) 0.006(0.152) Mechanical Data 0.096(2.44) 0.084(2.13) Case : Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 0.060(1.52) 0.030(0.76) 0.008(0.203)MAX. Polarity : Polarity symbol marking on body Mounting Position : Any 0.220(5.59) 0.200(5.08) Weight : 0.0035 ounce, 0.098 grams Dimensions in inches and (millimeters) Maximum Ratings And Electrical Characteristics Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load, for capacitive load current derate by 20%. Parameter SYMBOLS RS5A RS5B RS5D RS5G RS5J RS5K RS5M UNITS Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current at TL =100 C I(AV) 5.0 A Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load IFSM 150.0 A Maximum instantaneous forward voltage at 5.0A VF 1.30 V Maximum DC reverse current T A =25 C at rated DC blocking voltage TA=125 C IR 5.0 500 uA Maxinum reverse recovery time(Note 1) Trr Typical junction capacitance (Note2) CJ Typical thermal resistance RqJA Operating junction and storage temperature range TJ,TSTG 150 250 500 ns 70.0 pF 85 C/W -55 to +150 C Note: 1.Reverse recovery time test condition: IF=0.5A IR=1.0A Irr=0.25A 2.Measured at 1MHz and applied reverse voltage of 4.0V D.C. www.shunyegroup.com.cn 1/2 RS5A~RS5M 5.0Amp Fast Recovery Surface Mounted Rectifiers Ratings And Characteristic Curves FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PERLEG 210 Peak Forward Surage Current Amperes 8.0 7.0 180 6.0 Amperes Average Forward Rectified Current FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT 150 5.0 4.0 3.0 2.0 1.0 0.0 0 20 40 60 80 100 120 140 120 90 f=60Hz 60 30 1Cycle 0 160 1 10 Lead Temperature FIG. 3-TYPICAL FORWARD VOLTAGE CHARACTERISTICS Amperes Instantneous Forward Current 1 TJ=25 Pulse Width=300us 1% Duty Cycle 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Volts Instantaneou Foward Voltage 100 Micro Amperes Instantaneous Reverse Leakage Current FIG. 4-TYPICAL REVERSE LEAKAGE CHARACTERISTICS 10 0.1 100 Number of cycles Tj = 125°C 10 1.0 Tj = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 Percent Of Rated Peak Reverse Voltage(%) Suggested Pad Layout www.shunyegroup.com.cn Symbol Unit (mm) Unit (inch) A 0.091 B 2.30 2.00 C 4.10 0.161 D 2.10 0.083 E 6.10 0.240 0.078 2/2