SS10150

SS1020~SS10200 10.0Amp Surface Mounted Schottky Barrier Rectifiers DO-214AB/SMC Features The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications 0.245(6.22) 0.220(5.59) 0.126 (3.20) 0.114 (2.90) Built-in strain relief,ideal for automated placement Low reverse leakage High forward surge current capability 0.280(7.11) 0.260(6.60) High temperature soldering guaranteed 0.012(0.305) 0.006(0.152) 250 C/10 seconds at terminals 0.103(2.62) 0.079(2.06) Mechanical Data Case : Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 0.060(1.52) 0.030(0.76) 0.008(0.203)MAX. 0.320(8.13) 0.305(7.75) Polarity : Polarity symbol marking on body Mounting Position : Any Weight : 0.003 ounce, 0.092 grams Dimensions in inches and (millimeters) Maximum Ratings And Electrical Characteristics Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load, for capacitive load current derate by 20%. Parameter SYMBOLS SS1020 SS1040 SS1060 SS1080 SS10100 SS10150 SS10200 UNITS Maximum repetitive peak reverse voltage VRRM 20 40 60 80 100 150 200 V Maximum RMS voltage VRMS 14 28 42 56 70 105 140 V Maximum DC blocking voltage VDC 20 40 60 80 100 150 200 V Maximum average forward rectified current at TL =100 C I(AV) 10.0 A Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load IFSM 175.0 A Maximum instantaneous forward voltage at 10.0A VF Maximum DC reverse current T A =25 C at rated DC blocking voltage TA=125 C Typical thermal resistance Operating junction temperature range Storage temperature range www.shunyegroup.com.cn IR 0.70 0.55 0.85 0.5 50 0.95 0.05 10 V mA RqJA 60.0 C/W TJ -55 to +150 C TSTG -55 to +150 C 1/2 SS1020~SS10200 10.0Amp Surface Mounted Schottky Barrier Rectifiers Ratings And Characteristic Curves FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PERLEG 210 Peak Forward Surage Current Amperes 16.0 14.0 12.0 Amperes Average Forward Rectified Current FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT 10.0 8.0 6.0 4.0 2.0 0.0 0 20 40 60 80 100 120 140 180 150 120 90 f=60Hz 60 30 1Cycle 0 160 1 10 100 Lead Temperature Number of cycles FIG. 3-TYPICAL FORWARD VOLTAGE CHARACTERISTICS FIG. 4-TYPICAL REVERSE LEAKAGE CHARACTERISTICS 500 100 TJ=25 C INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES SS1020-SS1060 SS1080-SS10200 100 10 1 SS1020-SS1040 SS1060 SS1080-SS10100 SS10150-SS10200 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 10 TJ=100 C 1 0.1 0.01 0.001 0 TJ=25 C 20 40 60 80 100 PERCENT OF PEAK REVERSE VOLTAGE,% Suggested Pad Layout www.shunyegroup.com.cn Symbol Unit (mm) Unit (inch) A 0.142 B 3.60 5.35 C 1.50 0.059 D 1.85 0.073 E 4.30 0.169 0.211 2/2