SS1045

SS1045-SS10100 SCHOTTKY BARRIER RECTIFIER DO-214AB/SMC 0.245(6.22) 0.220(5.59) 0.126 (3.20) 0.114 (2.90) Features: Metal silicon junction, majority carrier conduction 0.280(7.11) 0.260(6.60) For surface mounted applications 0.012(0.305) 0.006(0.152) Low power loss, high efficiency Fast switching for high efficiency 0.103(2.62) 0.079(2.06) High forward surge current capability For use in low voltage, high frequency inverters 0.060(1.52) 0.030(0.76) 0.008(0.203)MAX. 0.320(8.13) 0.305(7.75) Absolute Maximum Ratings* (TA=25℃ Unless otherwise noted) Dimensions in inches and (millimeters) Ratings at 25 °C ambient temperature unless otherwise specified.Single phase, half wave, 60Hz resistive or inductive load, for capacitive load, derate by 20 % Parameter Symbols SS1045 SS1060 SS10100 Units Maximum Repetitive Peak Reverse Voltage V RRM 45 60 100 V Maximum RMS voltage V RMS 32 42 70 V Maximum DC Blocking Voltage V DC 45 60 100 V Maximum Average Forward Rectified Current I F(AV) 10.0 A Peak Forward Surge Current,8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) I FSM 150 A Max Instantaneous Forward Voltage @10.0 A Maximum DC Reverse Current T j = 25°C at Rated DC Reverse Voltage T j =100°C Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range VF 0.55 0.75 0.90 V IR 0.5 50 mA RθJA 20 °C/W Tj -55 ~ +150 °C T stg -55 ~ +150 °C （1）P.C.B. mounted with 2.0" X 2.0" (5 X 5 cm) copper pad areas. www.shunyegroup.com.cn 1/2 SS1045-SS10100 SCHOTTKY BARRIER RECTIFIER Typical Characteristics Fig.2 Typical Reverse Characteristics Average Forward Current (A) 12.0 10.0 8.0 6.0 4.0 2.0 0.0 25 50 75 100 125 150 Instaneous Reverse Current ( mA) Fig.1 Forward Current Derating Curve 1000 100 T J =25°C 1 0 0 Case Temperature (°C) 10 1 SS1045C SS1060C SS10100C 0.1 1.0 1.5 2.0 Instaneous Forward Voltage (V) Transient Thermal Impedance（ °C /W） Instaneous Forward Current (A) 20 0.5 20 40 60 80 100 Percent of Rated Peak Reverse Voltage（%） Fig.3 Typical Forward Characteristic 0 T J =100°C 10 Fig.4- Typical Transient Thermal Impedance 100 10 1 0.01 0.1 1 10 100 t, Pulse Duration（sec） Peak Forward Surage Current (A) Fig.5 Maximum Non-Repetitive Peak Forward Surage Current 180 175 150 125 100 75 50 25 8.3 ms Single Half Sine Wave (JEDEC Method) 00 10 1 100 Number of Cycles at 60Hz www.shunyegroup.com.cn 2/2