SS18

SS12 THRU SS110 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 100 Volts DO-214AC Forward Current - 1.0 Ampere FEATURES 0.087 (2.21) 0.070 (1.80) 0.110(2.80) 0.100(2.54) 0.177(4.50) 0.157(3.99) 0.012(0.305) 0.006(0.152) The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Metal silicon junction,majority carrier conduction Low power loss,high efficiency Built-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 250 C/10 seconds at terminals A MECHANICAL DATA 0.060(1.52) 0.030(0.76) 0.008(0.203)MAX. 0.222(5.66) 0.194(4.93) SMA SMA(H) A: 0.096(2.42) 0.078(1.98) 0.122(3.12) 0.110(2.82) Case: JEDEC DO-214AC molded plastic body Terminals: leads solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.003 ounce, 0.093 grams 0.004 ounce, 0.111 grams SMA(H) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. SYMBOLS SS12 SS13 SS14 SS15 SS16 SS18 SS110 UNITS VOLTS VOLTS VOLTS Amp Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL(see fig.1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) Operating junction temperature range Storage temperature range VRRM VRMS VDC I(AV) 20 14 20 30 21 30 40 28 40 50 35 50 1.0 60 42 60 80 56 80 100 70 100 IFSM VF IR CJ RqJA TJ, TSTG 0.45 0.55 40.0 0.70 0.5 6.0 110 -65 to +125 5.0 90 88.0 -65 to +150 -65 to +150 0.85 Amps Volts mA pF C/W C C Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2.P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas www.shunyegroup.com RATINGS AND CHARACTERISTIC CURVES SS12 THRU SS110 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1- FORWARD CURRENT DERATING CURVE £PEAK FORWARD SURGE CURRENT, AMPERES 1.0 FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 40 0.8 Single Phase Half Wave 60Hz Resistive or inductive Load 32 0.6 24 0.4 16 0.2 SS12-SS14 SS15-SS110 8 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0 0 25 50 75 100 125 150 175 0 1 10 100 AMBIENT TEMPERATURE, C NUMBER OF CYCLES AT 60 Hz FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 TJ=25 C FIG. 4-TYPICAL REVERSE CHARACTERISTICS 1,000 10.0 INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES 100 TJ=100 C 10 1 TJ=75 C 1 0.1 SS12-SS14 SS15-SS16 SS18-SS110 0.1 TJ=25 C 0.01 0 20 40 60 80 100 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 PERCENT OF PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLEAGE, VOLTS FIG. 5-TYPICAL JUNCTION CAPACITANCE 400 200 TJ=25 C FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/W 100 JUNCTION CAPACITANCE, pF 10 20 1 SS12-SS14 SS15-SS110 2 0.1 1.0 10 100 0.1 0.01 0.1 1 10 100 REVERSE VOLTAGE,VOLTS t,PULSE DURATION,sec. www.shunyegroup.com