SMD-C7

MIXERS TRIPLE-BALANCED LO = +10 dBm SURFACE MOUNT FREQUENCY RANGE (MHz) CONVERSION LOSS (dB) XMB FULL BAND TYP/MAX IMPROVED DYNAMIC RANGE 133 LO-RF ISOLATION (dB) LB TYP/MIN MB TYP/MIN UB TYP/MIN 159 LO-IF ISOLATION (dB) PACKAGE LB TYP/MIN MB TYP/MIN UB TYP/MIN PIN OUT MODEL RF/LO IF TYP/MAX 1 - 2500 5 - 1000 25 - 1800 50 - 2500 800 - 3550 1 - 2000 5 - 1000 25 - 1000 50 - 880 800 - 2500 6.5/8.5 6.5/8 7.5/8.5 7/8.5 --/-- 8.0/9.5 7.5/9.5 8/9 8/9.2 10/11.8 45/35 35/20 50/30 44/35 --/-- 35/25 40/30 45/25 --/---/-- 28/20 30/23 35/20 40/30 28/20 40/30 30/20 30/15 38/28 --/-- 26/20 30/20 25/15 --/---/-- 22/16 25/20 23/15 25/20 23/15 133 159 133 133 133 2 1 2 2 2 SMD-C8 SLD-K5 SMD-C5 SMD-C7 SMD-C9** THROUGH HOLE (RELAY) FREQUENCY RANGE (MHz) CONVERSION LOSS (dB) XMB FULL BAND TYP/MAX 102 LO-RF ISOLATION (dB) LB TYP/MIN MB TYP/MIN UB TYP/MIN 103 LO-IF ISOLATION (dB) PACKAGE LB TYP/MIN MB TYP/MIN UB TYP/MIN 105 PIN OUT MODEL RF/LO IF TYP/MAX 0.05 - 200 10 - 1000 0.05 - 1500 0.05 - 2000 10 - 2500 500 - 3700 10 - 2000 10 - 2500 10 - 3000 500 - 3700 NOTES: 0.05 - 200 5 - 500 0.05 - 500 0.05 - 500 10 - 1000 500 - 1000 10 - 1000 10 - 1000 10 - 800 500 - 1000 5.5/6.5 6/7.5 6/7.5 6/8 7/8 --/-6/8 7/8 6.3/8 --/-- 6.5/7 7/8 7/9 7/9 7.5/8.5 9.5/11.5 6.5/8 7.5/8.5 6.5/8.5 9.5/11.5 45/30 50/40 25/20 25/20 55/35 45/25 32/25 55/35 35/25 45/25 50/45 40/30 35/25 40/30 45/30 45/25 35/25 45/30 35/25 45/25 45/40 30/20 30/20 30/20 35/25 45/25 35/25 35/25 35/25 45/25 35/25 40/25 25/20 25/20 35/20 40/20 33/20 35/20 30/20 40/20 40/35 30/18 35/25 40/30 35/20 40/20 30/20 30/20 30/20 40/20 35/30 25/15 25/15 25/15 27/20 40/20 30/20 27/20 30/20 40/20 102 102 102 102 103 103 105 105 105 105 3 4 3 3 3 3 5 6 5 6 CLP-206 CLP-2P4 CLP-2H5 CLP-2B6 CLP-205 CLP-210 CLP-3E6 CLP-305 CLP-3B8 CLP-310 PIN-OUT TABLE RF #1 #2 #3 #4 #5 #6 4 1 1 8 4 1 LO 1 2 8 1 1 4 IF 5 3 3 3 2 2 GND 2,3,6 4,5,6 2,5,6,7 2,5,6,7 3 3 CASE GND NO CONN. 1. 1dB Compression Point = +5 dBm (Typ) 2. IP3 (Input) = +18 dBm (Typ) 3. As IF frequency decrease below LF towards DC, conversion loss increases up to 8 dB higher than maximum. 4. Maximum Input Power without damage = 250 mW ave. cw LO Frequency is specified from 600 to 2595 MHz ** UB identifies the full bandwidth specification ALL MODELS XMB= 2LF to HF/2 FULL BAND = LF to HF LB= LF to 10LF MB = 10LF to HF/2 UB= HF/2 to HF MODEL SMD-C7 XMB = 750 - 1000 MHz LB = 750 - 1200 MHz UB =1200 - 2500 MHz --2,5,6,7 2,5,6,7 3 3 --4 4 --- GND = Ground externally For pin location and package outline drawings, see back pages. *Connect pins together externally. 201 McLean Boulevard • Paterson, New Jersey 07504 • Tel: (973) 881-8800 • Fax: (973) 881-8361 E-Mail: sales@synergymwave.com • World Wide Web: http://www.synergymwave.com [ 76 ] MIXERS TRIPLE-BALANCED LO = +10 dBm THROUGH HOLE (TO -CAN) FREQUENCY RANGE (MHz) CONVERSION LOSS (dB) XMB FULL BAND TYP/MAX IMPROVED DYNAMIC RANGE 104 LO-RF ISOLATION (dB) LB TYP/MIN MB TYP/MIN UB TYP/MIN 122 LO-IF ISOLATION (dB) PACKAGE LB TYP/MIN MB TYP/MIN UB TYP/MIN 123 PIN OUT MODEL RF/LO IF TYP/MAX 0.5-200 10-2500 10-2500 500-3700 0.5-200 10-1000 10-1000 500-1000 5.5/6.5 7/8 7/8 --/-- 6.5/7 7.5/8.5 7.5/8.5 9.5/11.5 45/30 55/35 55/35 45/25 50/45 45/30 45/30 45/25 45/40 35/25 35/25 45/25 35/25 35/20 35/20 40/20 40/35 30/20 30/20 40/20 35/30 27/20 27/20 40/20 123 104 122 122 1 1 2 2 CLP-506 CLP-505 CLP-605 CLP-610 FLAT PACK FREQUENCY RANGE (MHz) CONVERSION LOSS (dB) XMB FULL BAND TYP/MAX LO-RF ISOLATION (dB) LB TYP/MIN MB TYP/MIN UB TYP/MIN LO-IF ISOLATION (dB) PACKAGE LB TYP/MIN MB TYP/MIN UB TYP/MIN PIN OUT MODEL RF/LO IF TYP/MAX 10 - 2500 500 - 3700 10 - 1000 500 - 1000 7/8 --/-- 7.5/8.5 9.5/11.5 55/35 45/25 45/30 45/25 35/25 45/25 35/20 40/20 30/20 40/20 27/20 40/20 101 101 3 3 CLF-105 CLF-110 COAXIAL FREQUENCY RANGE (MHz) CONVERSION LOSS (dB) XMB FULL BAND TYP/MAX LO-RF ISOLATION (dB) LB TYP/MIN MB TYP/MIN UB TYP/MIN LO-IF ISOLATION (dB) LB TYP/MIN MB TYP/MIN UB TYP/MIN OUTLINE DRAWING PIN OUT MODEL RF/LO IF TYP/MAX 0.05 - 200 10 - 2000 10 - 2500 10 - 3000 500 - 3700 NOTES: 0.05 - 200 10 - 1000 10 - 1000 10 - 800 500 - 1000 5.5/6.5 6/8 7/8 6.3/8 --/-- 6.5/7 6.5/8.5 7.5/8.5 6.5/8.5 9.5/11.5 45/30 32/25 55/35 35/25 45/25 50/45 35/25 45/30 35/25 45/25 45/40 35/20 35/20 35/25 45/25 35/25 33/20 35/20 30/20 40/20 40/35 30/20 30/20 30/20 40/20 35/30 25/20 27/20 30/20 40/20 110 110 110 110 110 4 4 4 4 4 CLK-706* CLK-7A6S CLK-705S CLK-7B8S CLK-710S 1. 1dB Compression Point = +5 dBm (Typ) 2. IP3 (Input) = +18 dBm (Typ) 3. As IF frequency decrease below LF towards DC, conversion loss increases up to 8 dB higher than maximum 4. Maximum Input Power without damage = 250 mW ave. cw PIN-OUT TABLE RF LO 5 3 4 3 IF 11 2 5 2 GND CASE GND NO CONN. ---- * Connector style: "B" = BNC, "T" = TNC, "N" = Type N, "S" = SMA Double Balanced Model (IP3 & 1dB comp. pt. 3 dB lower than specified.) XMB= 2LF to HF/2 FULL BAND = LF to HF LB= LF to 10LF MB = 10LF to HF/2 UB= HF/2 to HF #1 #2 #3 #4 2 1 1 1 All Others All Others 4 4 All Others All Others --- GND = Ground externally For pin location and package outline drawings, see back pages. 201 McLean Boulevard • Paterson, New Jersey 07504 • Tel: (973) 881-8800 • Fax: (973) 881-8361 E-Mail: sales@synergymwave.com • World Wide Web: http://www.synergymwave.com [ 77 ]