1N6012A

1N5985A - 1N6031A VZ : 2.4 - 200 V PD : 500 mW FEATURES : * Extensive selection from 2.0 V to 200 V * Standard zener voltage tolerance is ± 10%. * Other tolerances are available upon request. * Pb / RoHS Free ZENER DIODES DO - 35 Glass (DO-204AH) 0.079(2.0 )max. 1.00 (25.4) min. Cathode Mark 0.150 (3.8) max. MECHANICAL DATA : * Case: DO-35 Glass Case * Weight: approx. 0.13g 0.020 (0.52)max. 1.00 (25.4) min. Dimensions in inches and ( millimeters ) Maximum Ratings and Thermal Characteristics Rating at 25 °C ambient temperature unless otherwise specified. Rating Power Dissipation Maximum Forward Voltage at I F = 200 mA. Thermal Resistance Junction to Ambient (Note 1) Thermal Resistance Junction to Lead (Note 1) Operating and Storage Temperature Range Note : Symbol PD VF RӨJA RӨJL TJ,TSTG Value 500 1.1 310 250 - 65 to + 175 Unit mW V °C/W °C/W °C (1) At 3/8 inch (10 mm) from body, when mounted on FR4 PC board (1 oz Cu) with 4 m2 copper pads and track with 1 mm, length 25 mm . FIG. - 1 POWER DERATING CURVE RATED POWER DISSIPATION, (mW) 500 TL 400 300 Ta on FR4 PC Board 200 100 0 0 25 50 75 100 125 150 175 TEMPERATURE , (°C) Page 1 of 2 Rev. 01 : August 7, 2006 Electrical Characteristics Nominal Zener Voltage(2) Type VZ @ IZT (V) 1N5985A 1N5986A 1N5987A 1N5988A 1N5989A 1N5990A 1N5991A 1N5992A 1N5993A 1N5994A 1N5995A 1N5996A 1N5997A 1N5998A 1N5999A 1N6000A 1N6001A 1N6002A 1N6003A 1N6004A 1N6005A 1N6006A 1N6007A 1N6008A 1N6009A 1N6010A 1N6011A 1N6012A 1N6013A 1N6014A 1N6015A 1N6016A 1N6017A 1N6018A 1N6019A 1N6020A 1N6021A 1N6022A 1N6023A 1N6024A 1N6025A 1N6026A 1N6027A 1N6028A 1N6029A 1N6030A 1N6031A 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 IZT (mA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Test Current (Rating at 25 °C ambient temperature unless otherwise specified) Maximum Zener Impedance (1) ZZT @ IZT (Ω) 110 110 100 100 95 95 90 90 88 70 50 25 10 15 18 22 25 32 36 42 48 55 62 70 78 88 95 110 130 170 180 200 225 240 265 280 300 350 400 800 950 1250 1400 1700 2000 2350 2700 ZZK @ IZK (Ω) 2000 2200 2300 2400 2500 2500 2500 2500 2500 2200 2050 1800 1300 750 600 600 600 600 600 600 600 600 600 600 600 700 700 800 900 1000 1100 1300 1400 1600 1700 2000 2300 2600 3000 4000 4500 5000 5500 6000 7000 8000 9000 Test Current IZK (mA) 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Maximum Reverse Leakage Current IR (μA) 100 100 100 75 50 25 15 10 5.0 3.0 2.0 2.0 1.0 1.0 0.5 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 @ VR (V) 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.5 2.0 3.0 4.0 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11 12 14 15 17 18 21 23 25 27 30 33 36 39 43 47 52 56 62 69 76 84 91 99 114 122 Typical Temperature Coefficient of VZ αvz (%/ °C) -0.090 -0.075 -0.070 -0.060 -0.055 -0.045 -0.010 +0.010 +0.025 +0.035 +0.040 +0.044 +0.051 +0.055 +0.061 +0.065 +0.068 +0.073 +0.075 +0.079 +0.080 +0.083 +0.085 +0.087 +0.090 +0.091 +0.093 +0.094 +0.094 +0.095 +0.095 +0.096 +0.096 +0.096 +0.097 +0.097 +0.098 +0.098 +0.099 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 Maximum DC Zener Current IZM (mA) 208 185 167 152 139 128 116 106 98 89 81 74 67 61 55 50 45 42 38 33 31 28 25 23 21 19 17 15 14 13 12 11 9.8 8.9 8.0 7.4 6.7 6.1 5.5 5.0 4.5 4.2 3.8 3.3 3.1 2.8 2.5 Notes : (1) The Zener impedance is derived from the 1 kHz AC voltage which results when an AC current having an RMS value equal to 10% of the Zener current (IZT or IZK) is superimposed on I ZT or IZK. (2) Voltage Measurements to be performed 20 seconds after application of the dc test current. (3) Standard Zener voltage tolerance is ± 10%. Add suffix “B” for ± 5% tolerance Page 2 of 2 Rev. 01 : August 7, 2006