1N6299A

1N6267A-1N6303CA VBR : 6.8 - 200 Volts PPK : 1500 Watts FEATURES : * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to V BR(min.) * Typical IR less then 1µA above 10V TRANSIENT VOLTAGE SUPPRESSOR DO-201 0.21 (5.33) 0.19 (4.83) 1.00 (25.4) MIN. 0.375 (9.53) 0.285 (7.24) MECHANICAL DATA * Case : DO-201 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.93 grams 0.052 (1.07) 0.048 (0.97) 1.00 (25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1) Steady State Power Dissipation at TL = 75 °C Lead Lengths 0.375", (9.5mm) (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Operating and Storage Temperature Range Symbol PPK PD Value 1500 5.0 Unit W W IFSM 200 A TJ, TSTG - 65 to + 175 °C Notes : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on Copper Lead area of 1.57 in2 (40mm2). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum. Page 1 of 3 Rev. 02 : January 28, 2004 ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified Type No. Uni-directional 1N6267A 1N6268A 1N6269A 1N6270A 1N6271A 1N6272A 1N6273A 1N6274A 1N6275A 1N6276A 1N6277A 1N6278A 1N6279A 1N6280A 1N6281A 1N6282A 1N6283A 1N6284A 1N6285A 1N6286A 1N6287A 1N6288A 1N6289A 1N6290A 1N6291A 1N6292A 1N6293A 1N6294A 1N6295A 1N6296A 1N6297A 1N6298A 1N6299A 1N6300A 1N6301A 1N6302A 1N6303A Bi-directional 1N6267CA 1N6268CA 1N6269CA 1N6270CA 1N6271CA 1N6272CA 1N6273CA 1N6274CA 1N6275CA 1N6276CA 1N6277CA 1N6278CA 1N6279CA 1N6280CA 1N6281CA 1N6282CA 1N6283CA 1N6284CA 1N6285CA 1N6286CA 1N6287CA 1N6288CA 1N6289CA 1N6290CA 1N6291CA 1N6292CA 1N6293CA 1N6294CA 1N6295CA 1N6296CA 1N6297CA 1N6298CA 1N6299CA 1N6300CA 1N6301CA 1N6302CA 1N6303CA Breakdown Voltage @ It ( Note 1 ) VBR (V) Min. Max. 6.45 7.13 7.79 8.65 9.50 10.5 11.4 12.4 14.3 15.2 17.1 19.0 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95.0 105 114 124 143 152 162 171 190 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21.0 23.1 25.2 28.4 31.5 34.7 37.8 41.0 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105 116 126 137 158 168 179 189 210 It (mA) 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Working Peak Reverse Voltage VRWM (V) 5.80 6.40 7.02 7.78 8.55 9.40 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53.0 58.1 64.1 70.1 77.8 85.5 94.0 102 111 128 136 145 154 171 Maximum Maximum Reverse Leakage Reverse @ VRWM Current IR IRSM (A) (µA) 1000 500 200 50 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 143 132 124 112 103 96.0 90.0 82.0 71.0 67.0 59.5 54.0 49.0 45.0 40.0 36.0 33.0 30.0 28.0 25.3 23.2 21.4 19.5 17.7 16.3 14.6 13.3 12.0 11.0 9.9 9.1 8.4 7.2 6.8 6.4 6.1 5.5 Maximum Maximum Clamping Temperature Voltage @ IRSM Co-efficient VRSM of VBR (V) (% /°C) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103 113 125 137 152 165 179 207 219 234 246 274 0.057 0.061 0.065 0.068 0.073 0.075 0.078 0.081 0.084 0.086 0.088 0.090 0.092 0.094 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.102 0.103 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 Notes: ( 1 ) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent. ( 2 ) VF = 3.5 Vmax., IF = 100 Amps. ( 6.8 Volts thru 91 Volts ) VF = 5.0 Vmax., IF = 100 Amps. ( 100 Volts thru 200 Volts ) per 1/2 square or equivalent sine wave. PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. Page 2 of 3 Rev. 02 : January 28, 2004 RATING AND CHARACTERISTIC CURVES ( 1N6267A - 1N6303CA ) FIG.1 - PULSE DERATING CURVE 120 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 240 PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 100 80 200 160 60 120 40 80 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 20 0 0 25 50 75 100 125 150 175 40 0 1 2 4 6 10 20 40 60 100 Ta, AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.3 - STEADY STATE POWER DERATING PD, STEADY STATE POWER DISSIPATION (WATTS) 5.00 FIG.4 - PULSE RATING CURVE 100 3.75 Pp,PEAK POWER (kW) Single Phase Half Wave 60 Hz Resistive or Inductive load 10 2.50 1.0 1.25 0.1 0.1µs 125 150 175 200 1.0µs 10µs 100µs 1.0ms 10ms 0 0 25 50 75 100 tp, PULSE WIDTH TL, LEAD TEMPERATURE (°C) FIG.5 - PULSE WAVEFORM PEAK PULSE CURRENT - % IRMS Tr = 10µs 100 Peak Value IRMS TJ=25 °C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM 50 Half Value - IRMS 2 10X1000 Waveform as defined by R.E.A. tp 0 0 1.0 2.0 3.0 4.0 T, TIME(ms) Page 3 of 3 Rev. 02 : January 28, 2004