P6KE16CA

P6KE SERIES VBR : 6.8 - 440 Volts PPK : 600 Watts FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to V BR(min.) * Typical IR less then 1µA above 10V TRANSIENT VOLTAGE SUPPRESSOR D2A 0.161 (4.10) 0.154 (3.90) 1.00 (25.4) MIN. 0.284 (7.20) 0.268 (6.81) MECHANICAL DATA * Case : D2A Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.645 gram 0.0400 (1.02) 0.0385 (0.98) 1.00 (25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1) Steady State Power Dissipation at TL = 75 °C Lead Lengths 0.375", (9.5mm) (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Operating and Storage Temperature Range Symbol PPK PD Value Minimum 600 5.0 Unit W W IFSM 100 A TJ, TSTG - 65 to + 175 °C Notes : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on Copper Leaf area of 1.57 in2 (40mm2). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum. Page 1 of 3 Rev. 02 : January 28, 2004 ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified Type No. Uni-directional P6KE6.8A P6KE7.5A P6KE8.2A P6KE9.1A P6KE10A P6KE11A P6KE12A P6KE13A P6KE15A P6KE16A P6KE18A P6KE20A P6KE22A P6KE24A P6KE27A P6KE30A P6KE33A P6KE36A P6KE39A P6KE43A P6KE47A P6KE51A P6KE56A P6KE62A P6KE68A P6KE75A P6KE82A P6KE91A P6KE100A P6KE110A P6KE120A P6KE130A P6KE150A P6KE160A P6KE170A P6KE180A P6KE200A P6KE220A P6KE250A P6KE300A P6KE320A P6KE350A P6KE400A P6KE440A Bi-directional P6KE6.8CA P6KE7.5CA P6KE8.2CA P6KE9.1CA P6KE10CA P6KE11CA P6KE12CA P6KE13CA P6KE15CA P6KE16CA P6KE18CA P6KE20CA P6KE22CA P6KE24CA P6KE27CA P6KE30CA P6KE33CA P6KE36CA P6KE39CA P6KE43CA P6KE47CA P6KE51CA P6KE56CA P6KE62CA P6KE68CA P6KE75CA P6KE82CA P6KE91CA P6KE100CA P6KE110CA P6KE120CA P6KE130CA P6KE150CA P6KE160CA P6KE170CA P6KE180CA P6KE200CA P6KE220CA P6KE250CA P6KE300CA P6KE320CA P6KE350CA P6KE400CA P6KE440CA Breakdown Voltage @ It ( Note 1 ) VBR (V) Min. Max. 6.45 7.13 7.79 8.65 9.50 10.5 11.4 12.4 14.3 15.2 17.1 19.0 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95.0 105 114 124 143 152 162 171 190 209 237 285 303 332 380 418 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21.0 23.1 25.2 28.4 31.5 34.7 37.8 41.0 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105 116 126 137 158 168 179 189 210 231 263 315 337 368 420 462 It (mA) 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Working Peak Reverse Voltage VRWM (V) 5.80 6.40 7.02 7.78 8.55 9.40 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53.0 58.1 64.1 70.1 77.8 85.5 94.0 102 111 128 136 145 154 171 185 214 256 272 300 342 376 Maximum Maximum Reverse Leakage Reverse @ VRWM Current IR IRSM (A) (µA) 1000 500 200 150 150 150 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 57.0 53.0 50.0 45.0 41.0 38.0 36.0 33.0 28.0 27.0 24.0 22.0 20.0 18.0 16.0 14.4 13.2 12.0 11.2 10.1 9.3 8.6 7.8 7.1 6.5 5.8 5.3 4.8 4.4 4.0 3.6 3.3 2.9 2.7 2.6 2.4 2.2 1.83 1.75 1.45 1.35 1.25 1.10 1.00 Maximum Maximum Clamping Temperature Voltage @ IRSM Co-efficient VRSM of VBR (V) (% /°C) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103 113 125 137 152 165 179 207 219 234 246 274 328 344 414 445 482 548 602 0.057 0.061 0.065 0.068 0.073 0.075 0.078 0.081 0.084 0.086 0.088 0.090 0.092 0.094 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.102 0.103 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 Notes: ( 1 ) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent. ( 2 ) VF = 3.5 Vmax., IF = 50 Amps. ( 6.8 Volts thru 91 Volts ) VF = 5.0 Vmax., IF = 50 Amps. ( 100 Volts thru 440 Volts ) per 1/2 square or equivalent sine wave. PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. ( 3 ) For Bipolar types moving VR of 10 Volts and under, the IR limit is doubled. ( 4 ) "6KE" will be omitted in marking on the diode. Page 2 of 3 Rev. 02 : January 28, 2004 RATING AND CHARACTERISTIC CURVES ( P6KE SERIES ) FIG.1 - PULSE DERATING CURVE 120 120 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 100 100 80 80 60 60 40 40 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 20 0 0 25 50 75 100 125 150 175 20 0 1 2 4 6 10 20 40 60 100 Ta, AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.3 - STEADY STATE POWER DERATING PD, STEADY STATE POWER DISSIPATION (WATTS) 5.00 100 FIG.4 - PULSE RATING CURVE 3.75 Pp,PEAK POWER (kW) Single Phase Half Wave 60 Hz Resistive or Inductive load 10 2.50 1.0 1.25 0.1 0.1µs 125 150 175 200 1.0µs 10µs 100µs 1.0ms 10ms 0 0 25 50 75 100 tp, PULSE WIDTH TL, LEAD TEMPERATURE (°C) FIG.5 - PULSE WAVEFORM PEAK PULSE CURRENT - % IRMS Tr = 10µs 100 Peak Value IRMS TJ =25 °C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM 50 Half Value - IRMS 2 10X1000 Waveform as defined by R.E.A. tp 0 0 1.0 2.0 3.0 4.0 T, TIME(ms) Page 3 of 3 Rev. 02 : January 28, 2004