SC24115

Audible/Visible NotificAtioN Ceiling Mount Series Strobes and Horn/Strobes Models Available Strobe Models White SC2415W SC241575W SC2430W SC2475W SC2495W SC24115W SC24177W Horn/Strobe Models White PC2415W PC241575W PC2430W PC2475W PC2495W PC24115W PC24177W SC241575W Standard Application Red SC2415 SC241575 SC2430 SC2475 SC2495 SC24115 SC24177 Red PC2415 PC241575 PC2430 PC2475 PC2495 PC24115 PC24177 PC2475W Auxiliar y Form C Relay BBSCW Accessory Mounting Plates White Red BBSCW BBSC Product Overview Lower current draw Available in 15, 15/75, 30, 75, 95, 115, and 177 candela Horn/strobe models include a three position switch for field-selecting horn tones: - Electromechanical/3KHz - Temporal/Non-temporal - High/Low dBA output Ceiling-specific shape, profile, and aesthetics Synchronizable with MDL Sync•Circuit™ module Mounts to 4˝× 4˝× 11 ⁄2˝ back box Round shape offers greater placement flexibility System Sensor’s SpectrAlert® ceiling mount series strobes and horn/strobes offer a fresh approach to addressing the unique needs for ceiling mount applications. Technology. Like the original SpectrAlert, the SpectrAlert ceiling mount series offer significant current draw reductions over other ceiling mount strobes and horn/strobes. Installation. SpectrAlert’s compact design also offers installation savings. The strobe and horn/strobe models mount to a 4˝×4˝×11⁄2˝ back box, and take up little room in the back box, making connections easier. And with SpectrAlert’s round shape, it is not necessary to align the back box with the room’s walls. SpectrAlert always lines up. Flexibility. SpectrAlert ceiling mount strobes and horn/strobes are available in seven different candelas, including 177 candela for sleeping areas. The horn/ strobe’s tones are field-selectable through the use of a three position switch located on the back of the unit. Selections include electromechanical and 3 KHz tones, temporal and non-temporal patterns, and high and low volume. Aesthetics. SpectrAlert ceiling strobes and horn/strobes offer a design that is sensi- tive to the aesthetic demands of ceiling mount applications. The round shape maintains a low profile appearance, similar to that of a smoke detector and provides clearly visible “FIRE” identification from all angles. S5512 S4011 7125-1209:201 7135-1209:204 3006566 61-00-E 144-00-E Engineering Specifications Strobe Strobe shall be a System Sensor SpectrAlert Model _________ listed to UL 1971 and be approved for fire protective service where ceiling mount strobes are permitted. The strobe shall be wired as a primary signaling notification appliance and shall flash at 1Hz over the strobe’s entire operating range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. Horn/Strobe Combination Horn/strobe shall be a System Sensor SpectrAlert Model _________ listed to UL 1971 and UL 464 and be approved for fire protective service where ceiling mount horn/strobes are permitted. The horn/strobe shall be wired as a primary signaling notification appliance and shall flash at 1Hz over its entire operating range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have two tone options, two audibility options, and the option to switch between a temporal and a non-temporal continuous pattern. These options shall be selected by a multi-position switch. Strobes shall be powered independently of the sounder with the removal of factory installed jumper wires. The horn on horn/strobe models shall operate on a coded or non-coded power supply. Note: The strobes must be powered continuously for the horn to operate. General Specifications Dimensions 6.8˝ diameter Mounting 4˝× 4˝× 11/ ˝ back box or 2 4˝× 4˝× 21/ ˝ back box (with skirt) 8 Indoor Operating Temperature 32° to 120° F (0° to 49°C) Weight 5.3 oz. (150 grams) SpectrAlert Mounting Diagrams / 4 × 4 × 21 8˝ BBSCW Strobe or Horn/Strobe with Mounting Plate Strobe or Horn/Strobe with Accessory Back Box Skirt Electrical Specifications Operating Voltage 24 VDC and FWR1 unfiltered Input Terminals 12 to 18 AWG Operating Voltage Range 16–33 V Operating Voltage Range w/Sync•Circuit Module2 17-33 V U.S. Patent Numbers 6,049,446 6,057,778 D424,465 Notes: 1. Full Wave Rectified (FWR) voltage is a non-regulated, time-var ying power source that is used on some power supply and panel outputs. 2. The MDL causes a one-volt voltage drop in the notification appliance circuit. Table 1-A: SpectrAlert Strobe UL Max. Current Draw (mA RMS) Strobe Setting 15 15/75 30 75 95 115 177 16-33V FWR Operating Current – Strobe (mA RMS) 68 77 107 197 239 298 399 16-33V DC Operating Current – Strobe (mA RMS) 64 78 113 205 274 325 489 Table 1-B: Horn UL Max. Current Draw Measurements (mA RMS) 16-33V (DC) Temporal Low Volume High Volume NonTemporal Low Volume High Volume Electromechanical 3000 Hz Interrupted Electromechanical 3000 Hz Interrupted Electromechanical 3000 Hz Interrupted Electromechanical 3000 Hz Interrupted 23 33 53 57 37 32 49 56 16-33V (FWR) 23 23 44 40 29 33 49 58 Table 1-C: 24V DC Horn/Strobe UL Max. Current Draw Measurements (mA RMS) Temporal Low Volume Candela Setting 15 15/75 30 75 95 115 177 Electromechanical 73 89 126 225 272 297 512 3000 Hz 73 89 125 222 270 297 504 High Volume Electromechanical 76 91 128 222 271 296 501 3000 Hz 78 92 128 222 271 296 496 Low Volume Electromechanical 75 89 125 219 266 291 491 3000 Hz 75 90 125 219 265 290 493 Non-Temporal High Volume Electromechanical 81 96 131 221 269 292 491 3000 Hz 86 98 134 222 270 293 496 Explanation of Published Voltage, Current, and SPL Specifications In May 2004 Underwriters Laboratories changed standard UL 1971 to require that operating current measuremments are made using RMS (root mean square) instead of peak or average values. RMS measurements more accurately predict the power consumption of a device since they take into account the entire current draw profile including surge, repetitive surge, and peak values. The published RMS current is the maximum operating current of that device within its operating voltage range. This current maximum may or may not occur at the endpoints of the voltage range. During May 2004, UL also changed the way they list the voltage range of a device. All 12V products will be listed between 8 – 17.5V and all 24V products will be listed between 16 – 33V. Those devices are considered “regulated”. Any product that does not operate within these ranges will be listed as a “special application” with its operating voltage specified on the device. Notes 1. urrent draw for strobe-only products is shown in Table 1-A. C 2 Similarly, UL tests the audibility of devices in accordance 2. 4VDC 2-wire horn/strobe current draw is shown in Table 1-C. with UL 464 by measuring them across the operating voltC age range to determine the minimum sound pressure level 3. urrent draw for other horn/strobe power supplies can be calculated by adding the strobe current in Table 1-A to the produced at any particular setting. horn current in Table 1-B from the chosen settings. Horn Sound Measurements (dBA) Selectable Horn Tones Temporal Low Volume Electromechanical 3000 Hz Interrupted High Volume Electromechanical 3000 Hz Interrupted NonTemporal Low Volume Electromechanical 3000 Hz Interrupted High Volume Electromechanical 3000 Hz Interrupted 16-33V 75 75 80 81 79 79 84 86 SpectrAlert Dimensions 2.2˝ 6.8˝ SpectrAlert Ceiling Mount Strobe 2.2˝ 6.8˝ SpectrAlert Ceiling Mount Horn/Strobe Ordering Information Model No. SC2415 SC2415W SC241575 SC241575W SC2430 SC2430W SC2475 SC2475W SC2495 SC2495W SC24115 SC24115W SC24177 SC24177W PC2415 PC2415W PC241575 Description Ceiling-mount strobe, 24 volt, 15 candela, red Ceiling-mount strobe, 24 volt, 15 candela, white Ceiling-mount strobe, 24 volt, 15/75 candela, red Ceiling-mount strobe, 24 volt, 15/75 candela, white Ceiling-mount strobe, 24 volt, 30 candela, red Ceiling-mount strobe, 24 volt, 30 candela, white Ceiling-mount strobe, 24 volt, 75 candela, red Ceiling-mount strobe, 24 volt, 75 candela, white Ceiling-mount strobe, 24 volt, 95 candela, red Ceiling-mount strobe, 24 volt, 95 candela, white Ceiling-mount strobe, 24 volt, 115 candela, red Ceiling-mount strobe, 24 volt, 115 candela, white Ceiling-mount strobe, 24 volt, 177 candela, red Ceiling-mount strobe, 24 volt, 177 candela, white Ceiling-mount horn/strobe, 24 volt, 15 candela, red Ceiling-mount horn/strobe, 24 volt, 15 candela, white Ceiling-mount horn/strobe, 24 volt, 15/75 candela, red Accessories MDL MDLW BBSC BBSCW Sync•Circuit™ Module, red Sync•Circuit™ Module, white Surface-mount back box skirt, red Surface-mount back box skirt, white PC241575W PC2430 PC2430W PC2475 PC2475W PC2495 PC2495W PC24115 PC24115W PC24177 PC24177W Ceiling-mount horn/strobe, 24 volt, 15/75 candela, white Ceiling-mount horn/strobe, 24 volt, 30 candela, red Ceiling-mount horn/strobe, 24 volt, 30 candela, white Ceiling-mount horn/strobe, 24 volt, 75 candela, red Ceiling-mount horn/strobe, 24 volt, 75 candela, white Ceiling-mount horn/strobe, 24 volt, 95 candela, red Ceiling-mount horn/strobe, 24 volt, 95 candela, white Ceiling-mount horn/strobe, 24 volt, 115 candela, red Ceiling-mount horn/strobe, 24 volt, 115 candela, white Ceiling-mount horn/strobe, 24 volt, 177 candela, red Ceiling-mount horn/strobe, 24 volt, 177 candela, white System Sensor Sales and Service System Sensor Headquarters 3825 Ohio Avenue St. Charles, IL 60174 Ph: 800/SENSOR2 Fx: 630/377-6495 www.systemsensor.com System Sensor Canada Ph: 905.812.0767 Fx: 905.812.0771 System Sensor Europe Ph: 44.1403.276500 Fx: 44.1403.276501 System Sensor in China Ph: 86.29.8832.0119 Fx: 86.29.8832.5119 System Sensor in Singapore Ph: 65.6273.2230 Fx: 65.6273.2610 System Sensor – Far East Ph: 85.22.191.9003 Fx: 85.22.736.6580 System Sensor – Australia Ph: 613.54.281.142 Fx: 613.54.281.172 System Sensor – India Ph: 91.124.237.1770 x.2700 Fx: 91.124.237.3118 System Sensor – Russia Ph: 70.95.937.7982 Fx: 70.95.937.7983 A05-1025-008•9/05•#1530 © 2005 System Sensor. The company reserves the right to change product specifications without notice.