SSM24-6

SSM/SSV Series Alarm Bells System Sensor’s SSM and SSV series bells are low current, high decibel notification appliances for use in fire and burglary systems or other signaling applications. Features • Approved for indoor and outdoor use • Low current draw • High dB output • Available in six-inch, eight-inch, and ten-inch sizes • AC and DC models • DC models polarized for use with supervision circuitry • Mount directly to standard four-inch square electrical box indoors • SSM and SSV series pre-wired Reliable Performance. The SSM and SSV series provide loud resonant tones. The SSM series operates on 24VDC and are motor driven, while the SSV series operates on 120VAC utilizing a vibrating mechanism. Simplified Installation. For indoor use, the SSM and SSV series mount to a standard four-inch square electrical box. For outdoor applications, weatherproof back box, model number WBB, is used. The SSM and SSV series come pre-wired, to reduce installation time. The SSM series incorporates a polarized electrical design for use with supervision circuitry. Agency Listings S4011 CS549 3005255 7135-1653:125 7135-1653:100 331-01-E SSM/SSV Specifications Architectural/Engineering Specifications Model shall be a SSM or SSV Series alarm bell. Bells shall have underdome strikers and operating mechanisms. Gongs on said bells shall be no smaller than nominal 6˝/8˝/10˝ (specify size) with an operating voltage of 24VDC or 120VAC (specify by part number). Bells shall be suitable for surface or semi-flush mounting. Outdoor surface mounted installations shall be weatherproof (using optional WBB weatherproof electrical box). Otherwise bells shall mount to a standard 4˝ square electrical box having a maximum projection of 2½˝. Bells shall be located as shown on the drawings or as determined by the Authority Having Jurisdiction. Bells shall be listed for indoor/outdoor use by Underwriters Laboratories and the California State Fire Marshal, and approved by Factory Mutual and MEA. Physical/Operating Specifications Operating Temperature Range –31°F to 140°F Operating Voltage SSM series: 24 VDC SSV series: 120 VAC Termination Provided with 2 sets of leads for in/out wiring Service Use Fire Alarm, General Signaling, Burglar Alarm Warranty 3 years Electrical Specifications Model SSM24-6 SSM24-8 SSM24-10 SSV120-6 SSV120-8 SSV120-10 Gong Diameter (inches) 6 8 10 6 8 10 Nominal Voltage Regulated 24VDC Regulated 24VDC Regulated 24VDC Regulated 120VAC Regulated 120VAC Regulated 120VAC Operating Voltage Limit 16 to 33VDC 16 to 33VDC 16 to 33VDC 96 to 132VAC 96 to 132VAC 96 to 132VAC Maximum Current DC-31.1mA/ FWR-53.5mA DC-31.1mA/ FWR-53.5mA DC-31.1mA/ FWR-53.5mA 53mA 53mA 53mA Sound Output (dBA) 82 80 81 85 82 82 * Sound output measured at Underwriter Laboratories, as specified in UL464 Ordering Information UL/FM Model No. SSM24-6 SSM24-8 SSM24-10 SSV120-6 SSV120-8 SSV120-10 WBB ULC/Canadian Model No. SSM24-6A SSM24-8A SSM24-10A SSV120-6A SSV120-8A SSV120-10A Description Bell, 6˝, 24VDC, Polarized, 82dBA Bell, 8˝, 24VDC, Polarized, 80dBA Bell, 10˝, 24VDC, Polarized, 81dBA Bell, 6˝, 120VAC, 85dBA Bell, 8˝, 120VAC, 82dBA Bell, 10˝, 120VAC, 82dBA Weatherproof back box for SSM and SSV series, when installed outdoors 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 ©2007 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. A05-0260-008 • 4/07 • #1676