TA0314A

TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 1150MHz SMD 3.0×3.0mm TST Parts No.:TA0314A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Approval by: Date: Elvis Chiu Francis Chen 2003/11/14 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com SAW Filter 1150 MHz MODEL NO.: TA0314A A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.DC voltage: 5V 3.Operating Temperature: -10°C to +85°C 4.Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Balanced to balanced operation Terminating source impedance: Terminating load impedance: Item Center frequency Insertion Loss 1142~1158 MHz Ripple Ripple Absolute Group Delay Fc ILmin (reference level) 1145~1155MHz 1142~1158MHz (at 1150MHz) ZS=100Ω ZL=100Ω Unit MHz dB dB dB ns ns MHz MHz MHz MHz dB dB dB dB 35 4 20 35 Min. Type. 1150 2.5 0.6 0.7 38 12 42 20 24 40 Max. 5.0 2.0 80 90 REV. NO.:1 RoHS Compliant Lead free Lead-free soldering Group Delay Variation 1142~1158MHz Attenuation:(Reference level from ILmin ) 500 ~ 1118 1118 1180 1220 ~ 1128 ~ ~ 1220 1600 Note: ILmin is the minimum of the pass band attenuation. The center frequency Fc is the mean value of the upper and lower frequencies at the 2dB filter attenuation level relative to the ILmin. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : Transfer Function TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Wideband Group Delay TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. MEASUREMENT CIRCUIT: Banance impedance 100 ohm Balance impedance 100ohm E.OUTLINE DRAWING: NL ◇□ Pin 1,2 : Balanced Input Pin 5,6 : Balanced Output P3,4,7,8 : Ground ◇ : Year Code □ : Date Code Unit : mm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION ◇□ NL TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6