TB0492A

TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: 456 MHz 10.4MHz BW SMD7x5mm IF SAW Filter TST Parts No.:TB0492A Customer Parts No.: Customer signature required Company: Division: Approved by : Date: Checked by: Approval by: Date: Andy Yu Francis Chen 2009/10/13 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes TAI-SAW TECHNOLOGY CO., LTD. FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com 456MHz 10.4MHz BW SMD7x5mm IF SAW Filter MODEL NO.: TB0492A A. MAXIMUM RATING: 1.Operating Temperature: -40 °C ~ +90 °C 2. Storage Temperature: -40 °C ~ +90 °C 3. Input Power Level: 10 dBm B. Characteristics : 1. Ambient Temperature: 25 °C 2. Optimal Source Impedance(Balanced): 200 ohms 3. Optimal Load Impedance(Balanced): 200 ohms Characteristics Min. Center Frequency FC MHz dB dB dB Minimum Insertion Loss Passband Ripple (Fc ± 2.9MHz) Passband Ripple (Fc ± 5.0MHz) Value Typ. 456.0 10.5 0.8 1.7 80 0.44 40 53 53 56 -18 RoHS Compliant Lead free Lead-free soldering REV No. 2.0 Max. 11.0 1.5 2.0 150 Note - dB Group Delay Ripple (Fc ± 5.2MHz) nS Absolute group delay (at Fc) uS Attenuation:( Reference level from minimum insertion loss) 1) Fc ± 10.0MHz …Fc ± 43.0MH dB 37 2) 3) 411 MHz ~ 413 MHz 393 MHz ~ 411 MHz dB dB dB ppm/˚ C2 40 40 42 - - 4) 343 MHz ~ 393 MHz Temp Coefficient TAI-SAW TECHNOLOGY CO., LTD. -2- C. Measurement Circuit: (1) Single end 50 ohm to Single end 50 ohm L1=10nH, C1=150pF, L2=10nH, C2=120pF (2) Balanced 200 ohm to Balanced 200 ohm TAI-SAW TECHNOLOGY CO., LTD. -3- D. Frequency Characteristics : 1. S21 Response 2. Pass band Ripple TAI-SAW TECHNOLOGY CO., LTD. -4- 3. S11 Smith-Chart: 4. S22 Smith-Chart: TAI-SAW TECHNOLOGY CO., LTD. -5- E. PCB Footprint F. Outline Drawing: Pin J : Balanced Input or single ended input Pin D : Balanced Output or single ended Output Pin F : Balanced Input return or single ended Input ground Pin L : Balanced Output return or single ended Output ground Pin A,B,C,G,H,I : To be Ground □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code TAI-SAW TECHNOLOGY CO., LTD. -6- Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b G. PACKING: 1. REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. -7- 2. TAPE DIMENSION H. Recommended Reflow Profile: TAI-SAW TECHNOLOGY CO., LTD. -8-