TX0395B

TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com Product Specifications Approval Sheet Product Name: TCXO SMD 2.5x2.0 26.000MHz TST Part No.: TX0395B( This part is compliant with AEC-Q200) Customer Part No.: Company: Division: Approved by: Date: Checked by: Approved by: Date: Naco Kuo Kelly Huang 03/21/2016 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. TCXO SMD 2.5x2.0 26.000MHz MODEL NO.: TX0395B REV. NO.: 5 Revise: Rev. Rev. Page Rev. Account Date 1 2 3 N/A Initial release Modify spec for MTK Modify the recommended circuit and Modify Vcc spec Add AEC-Q200 Change packing quantity to 3K/reel 07/13/11 N/A C.C. Hsu 04/12/13 C.C. Hsu 05/09/14 ECN-201400214 Naco Kuo 4 5 Ref. No. Revised by 08/03/15’ ECN-201500311 Naco Kuo 03/21/16’ ECN-201600114 Naco Kuo TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com TCXO SMD 2.5x2.0 26.000MHz MODEL NO.: TX0395B REV. NO.: 5 Features:     Ultra Miniature SMD Package Good Frequency Stability Good Phase Noise Response Compliant with AEC-Q200 RoHS Compliant Lead free Lead-free soldering Description and Applications: Surface mount 2.5mmx2.0mm TCXO for use in wireless communications devices Electrical Specifications: TX0395B Specifications Nominal Frequency, Fo 26.000 MHz Storage Temperature Range -40C to +85C Operating Temperature Range -40C to +85C Power Supply Voltage, Vcc 1.7~3.3V (Reference to 2.8V) Output Voltage with Load 10pF//10KΩ, Vout 0.8 Vp-p min Output Waveform Clipped Sinewave Output Load 10pF//10KΩ Power Supply Current, Icc 1.5 mA max Frequency Tolerance as received +/- 1.0 ppm max @ 25C +/- 3C Frequency Tolerance after reflow +/- 2.0 ppm max @ 25C +/- 3C Frequency Stability a. Vs. Temperature (-30~85C) Vs. Temperature (-40~-30C) b. Vs. Load varied 10pF//10KΩ+/-5% c. Vs. Supply Voltage varied 2.8V+/-5% Frequency slope (Minimum of one measurement every 2C) Static temperature hysteresis +/- 0.5 ppm reference to the middle point betwee minimum and maximum frequency value +/- 3.0 ppm +/- 0.1 ppm +/- 0.1 ppm +/-0.05ppm/°C@-20°C~+65°C +/-0.1ppm/°C@-30°C~+85°C +/-0.35ppm/°C@-40°C~+-30°C +/- 0.6 ppm max. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Start Up Time (90% of final RF level in Vp-p) (Within ± 0.5 ppm of final freq) 2.0 msec max. Harmonics -8.0 dBc max Aging SSB Phase Noise (@1Hz Carrier Offset) (@10Hz Carrier Offset) (@100Hz Carrier Offset) (@1KHz Carrier Offset) (@10KHz Carrier Offset) (@100KHz Carrier Offset) +/-1.0 ppm/year max @25C first year +/-1.5 ppm/year max @25C 2nd year +/-2.5 ppm/year max @25C 5 years +/-5.0 ppm/year max @25C 10 years -50 dBc/Hz max -80 dBc/Hz max -105 dBc/Hz max -130 dBc/Hz max -148 dBc/Hz max -150 dBc/Hz max Mechanical Dimensions (mm): Marking: Line 1: Frequency (26.0) Line 2: TST Logo + Date Code + Product Code ( □ is TST internal tracking code, could be a~z and A~Z) PIN#4 PIN#3 PIN#1 PIN#2 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z Product Code Table: (Under line With Even Year and Odd Year for Nothing) Recommended Circuit Reel Dimension TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Tape Dimension Packing Quantity/Packing: 3K pcs maximum per reel TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 Reflow Profile: 300 Reflow Area Rising Area Temperature (deg C) 250 Preheat Area Forced Cooling Area 200 150 100 Max peak temperature: 260 deg C 50 0 0 60 120 180 240 300 360 Time (seconds) Notes of the Usage: 1. Touch the solder iron at 260+/-5 deg C onto the leads for 10+/-2 sec max or touch the solder at 350+/-5 deg C onto the leads for 3+/-0.5 sec. 2. In the customer’s reflow process, if it will remain some mechanical stress at the soldering terminals, also make some cracks on the soldering termination. Some cracks will cause open or short circuit and cause of thermal increasing or smoking. Don’t make any excess mechanical stress to soldering points. 3. In case of giving a heavy shock to the products, it may make an open or short circuit and cause of thermal increasing and smoking. To avoid heavy shock impact applying to products is strictly required. Notes of the Storage: 1. To keep products under the condition at the room temperature (-5~35 deg C) with normal humidity (45~75%). Absorption of moisture and dewdrop may make inferiority of characteristics and a short circuit. 2. Oxidization of terminals shall make the solderability more inferior. Dusts and corrosive gas will make a cause of the open or short circuit. Keep it in the clean place where is not in dusty and no corrosive gas. 3. Use the unti-static material to the storage package. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 4. Don’t put any excess weight to the TCXO in the storage process. 5. Don’t move the product from the cold place to the hot place in the short time, otherwise it may make some dew-drop, then a short circuit may happen in case. 6. Storage periods should be maximum 6 months under condition of above item 1 after delivery from TST factory. 7. Once open the bag, there is possibility of electrical characteristics deterioration due to absorption of moisture. So, please use parts within 7 days after opening the bag. 8. If you have to keep parts without using after opening the bag, please put the drying agent in the bag, fold the bag and keep it in the place where temperature and humidity are controlled (nitrogen atmosphere box etc.) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8