TX1066AA4315

TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com Product Specifications Approval Sheet Product Description: VCTCXO SMD 7.0x5.0 16.384MHz TST Part No.: TX1066AA4315 Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Yifan Chen Approved by: Kelly Huang Date: 06/28/2023 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. VCTCXO SMD 7.0x5.0 16.384MHz MODEL NO.: TX1066AA4315 REV. NO.: 1.0 Revise: Rev. Rev. Page Rev. Account Date Ref. No. Reviser 1 N/A Initial release 06/28/23’ N/A Yifan Chen TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com VCTCXO SMD 7.0x5.0 16.384MHz MODEL NO.: TX1066AA4315 REV. NO.:1.0 Features:     RoHS Compliant Ultra Miniature SMD Package Good Frequency Stability Good Phase Noise Response Moisture Sensitivity Level (MSL) : Level-1 Lead-free soldering Description and Applications: Surface mount 7.0mmx5.0mm VCTCXO for use in wireless communications devices  FREQUENCY CHARACTERISTICS Parameter Min. 1-1 Nominal Frequency Typ. Max. 16.384000 Nominal Frequency 1-2 Tolerance Units Test Condition MHz -1.0 +1.0 ppm Frequency at 25℃, before reflow. -1.0 +1.0 ppm Referenced to the frequency at 25℃. 1-4 Operating Temperature range -40 +85 ℃ 1-5 Storage Temperature range -40 +85 ℃ 1-5 Supply voltage stability -0.2 +0.2 -1 +1 1-3 Frequency stability over temperature 1-6 Aging  The operating temperature range over which the frequency stability is measured ppm Supply voltage varied ±5% at 25℃ ppm Year at 25℃ POWER SUPPLY Parameter 2-1 Supply voltage 2-2 Current Min. Typ. Max. Units 2.97 3.3 3.63 V 6 TAI-SAW TECHNOLOGY CO., LTD. Test Condition mA At maximum supply voltage TST DCC Release document 3  CONTROL VOLTAGE Parameter Min. Typ. Max. Units 3-1 Control voltage range 0.5 1.5 2.5 V 3-2 Pulling range ±5 ±12 3-3 Vcon input impedance ppm Referenced to VCON at 1.5V kOhm Measured between VCON and GND pin 3-4 Linearity  Test Condition 10 % Max. Units OSCILLATOR OUTPUT Parameter Min. 4-1 Output waveform 4-2 Output voltage level high Typ. Test Condition CMOS 2.97 V 4-3 Output voltage level low 0.33 V 4-4 Output load capacitance 15 pF Operating range 55 % Measured at 50% VDD trigger level 4-6 Rise and fall times 6 ns CMOS logic output at 10% to 90% 4-7 Start time 10 ms 4-5 Duty cycle 45 50 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Mechanical Dimensions (mm): Test Circuit: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Output Waveform : Marking: Line 1 : Frequency (16.384) Line 2: TST Logo + Product Code + Date Code + Internal Traceability Code (XX) : Can be 1 or 2 letters) 16.384 XDXX Product Code Table Year Product code 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 X x X x Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 Reel Dimensions (mm): Tape Dimensions (mm): TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 Packing Quantity/Packing: 1K pcs maximum per reel Reflow Profile: Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8 Notes of the Usage: 1. Touch the solder iron at 260+/-5 deg C onto the leads for 10+/-2 sec max or touch the solder at 350+/-5 deg C onto the leads for 3+/-0.5 sec. 2. In the customer’s reflow process, if it will remain some mechanical stress at the soldering terminals, also make some cracks on the soldering termination. Some cracks will cause open or short circuit and cause of thermal increasing or smoking. Don’t make any excess mechanical stress to soldering points. 3. In case of giving a heavy shock to the products, it may make an open or short circuit and cause of thermal increasing and smoking. To avoid heavy shock impact applying to products is strictly required. 4. Ultrasonic cleaning should be avoided to prevent damage to the TCXO. 5. Do Not Use Ultrasonic-Wave Soldering or Wave Solder with Package Immersed in Solder. Notes of the Storage: 1. To keep products under the condition at the room temperature (-5~35 deg C) with normal humidity (45~75%). Absorption of moisture and dewdrop may make inferiority of characteristics and a short circuit. 2. Oxidization of terminals shall make the solderability more inferior. Dusts and corrosive gas will make a cause of the open or short circuit. Keep it in the clean place where is not in dusty and no corrosive gas. 3. Use the unti-static material to the storage package. 4. Don’t put any excess weight to the VCTCXO in the storage process. 5. Don’t move the product from the cold place to the hot place in the short time, otherwise it may make some dew-drop, then a short circuit may happen in case. 6. Storage periods should be maximum 6 months under condition of above item 1 after delivery from TST factory. 7. Once open the bag, there is possibility of electrical characteristics deterioration due to absorption of moisture. So, please use parts within 7 days after opening the bag. 8. If you have to keep parts without using after opening the bag, please put the drying agent in the bag, fold the bag and keep it in the place where temperature and humidity are controlled (nitrogen atmosphere box etc.) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 9 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 10