TZ3261C

1/8 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com Product Specifications Approval Sheet Product Description: Crystal Unit SMD 2.0x1.6 24.0MHz TST Part No.: TZ3261C Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Chia Haur Rau Approved by: Kelly Huang Date: 03/23/2018 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 2/8 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 2.0x1.6 24.0MHz MODEL NO.: TZ3261C REV. NO.: 1 Revise: Rev. Rev. Page Rev. Account Date 1 N/A Initial release 03/23/18’ N/A TAI-SAW TECHNOLOGY CO., LTD. Ref. No. Revised by Chia Haur Rau TST DCC Release document 3/8 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 2.0x1.6 24.0MHz MODEL NO.: TZ3261C REV. NO.: 1 Features:       Surface Mount Hermetic Package Excellent Reliability Performance Good Frequency Perturbation and Stability over temperature Ultra Miniature Package AEC-Q200 compliance Moisture Sensitivity Level (MSL) : Level-1 RoHS Compliant Lead free Lead-free soldering Description and Applications: Surface mount 2.0mmx1.6mm crystal unit for use in wireless communications devices, especially for a need of ultra miniature package for mobility. Electrical Specifications: TZ3261C Specification Nominal Frequency 24.000000 MHz Mode of Oscillation Fundamental Storage Temperature Range -40C to +125C Operating Temperature Range -40C to +125C Frequency Stability over Operating Temperature Range +/-50 ppm (referred to the value at 25C) Frequency Make Tolerance (FL) +/-10 ppm @ 25C +/- 3C Equivalent Series Resistance (ESR) 80  max Nominal Drive Level 50uW typical and 200uW max Shunt Capacitance (Co) 3.0 pF max Load Capacitance (CL) 8 pF Aging +/-2 ppm/year Insulation Resistance 500 M min./DC 100V Marking Laser Marking Unit Weight 5.7mg+/-0.5mg TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4/8 Mechanical Dimensions (mm): Base Recommended Land Pattern: (unit: mm) Marking: Line 1: XX; Frequency (24) Line 2: T; Traceable Code + D; date Code of Year/Month TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5/8 Date Code Table: Year/Month Year/Month 1 2 3 4 5 6 7 8 9 10 11 12 2009 n p q r s t u v w x y z 2010 A B C D E F G H J K L M 2011 N P Q R S T U V W X Y Z 2012 a b c d e f g h i j k m 2013 n p q r s t u v w x y z 2014 A B C D E F G H J K L M 2015 N P Q R S T U V W X Y Z 2016 a b c d e f g h i j k m 2017 n p q r s t u v w x y z 2018 A B C D E F G H J K L M 2019 N P Q R S T U V W X Y Z 2020 a b c d e f g h i j k m 2021 n p q r s t u v w x y z Reel Dimensions (mm): TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6/8 Tape Dimensions (mm): Direction of Feed [NOTE]: 1. Unless otherwise specified tolerance on dimension +/-0.1 mm. 2. Material: conductive polystyrene with color black. 3. 10 pitch cumulative tolerance +/-0.2 mm. Packing Quantity/Packing: 3K pcs maximum per reel TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7/8 Reflow Profile: Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8/8 Reliability Specifications (AEC-Q200) Test name Reference standard Test process / method Mechanical characteristics resistance to Soldering heat (IR reflow) Temp./ Duration : 265°C /10sec ×2 times Total time : 4min.(IR-reflow) Vibration Total peak amplitude : 1.5mm Vibration frequency : 10 to 2000 Hz Sweep period : 20 minute Vibration directions : 3 mutually perpendicular directions : 3 impacts per axis Acceleration : 6000g's, +20/-0 % Duration : 0.3 ms (total 18 shocks) Waveform : Half-sine Solder Temperature:265±5°C Duration time: 5±0.5 seconds. Mechanical Shock Solderability EIAJED-4701 -300(301)M(II) MIL-STD 202G method 204 MIL-STD 202G method 213 J-STD-002 Environmental characteristics Thermal Shock Heat cycle conditions 125 ℃ (30min) -55 ℃ (30min) ←→ * cycle time : 1000 times MIL-STD 883G method 1010.8 Humidity test Temperature : 85 ± 2 °C Relative humidity : 85% Duration : 1000 hours Temperature : 125 ± 2 °C Duration : 1000 hours MIL-STD 202G method 103 Dry heat ( Aging test ) Cold resistance Temperature : -40 ± 3 °C : 1000 hours (Low Temp Storage) Duration TAI-SAW TECHNOLOGY CO., LTD. MIL-STD 202G method 108A IEC 60068-2-1 TST DCC Release document