TZ3604A

1/7 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com Product Specifications Approval Sheet Product Description: Crystal Unit SMD 3.2x2.5 16.00MHz TST Part No.: TZ3604A Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Glen Peng Approved by: Kelly Huang Date: 07/09/2019 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 2/7 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 3.2x2.5 16.00MHz MODEL NO.: TZ3604A REV. NO.: 1 Revise: Rev. Rev. Page Rev. Account Date 1 N/A 07/09/19’ N/A Initial release TAI-SAW TECHNOLOGY CO., LTD. Ref. No. Revised by Glen Peng TST DCC Release document 3/7 TAI-SAW TECHNOLOGY CO., LTD. Crystal Unit SMD 3.2x2.5 16.00MHz MODEL NO.: TZ3604A REV. NO.: 1 Features:
Surface Mount Hermetic Package

Excellent Reliability Performance Good Frequency Perturbation and Stability over temperature

Ultra Miniature Package AEC-Q200 compliance
Moisture Sensitivity Level (MSL) : Level-1 RoHS Compliant Lead free Lead-free soldering Description and Applications: Surface mount 3.2mmx2.5mm crystal unit for customer for use in wireless communications devices, especially for a need of ultra miniature package for mobility. Electrical Specifications: TZ3604A Specification Nominal Frequency 16.000000 MHz Mode of Oscillation Fundamental Storage Temperature Range -40°C to +125°C Operating Temperature Range -40°C to +125°C Frequency Stability over Operating Temperature +/- 30 ppm (referred to the value at 25°C) Frequency Make Tolerance (FL) +/- 10 ppm @ 25°C +/- 3°C Equivalent Series Resistance (ESR) 60 Ω max. Nominal Drive Level 50uW typical and 200uW max Shunt Capacitance (Co) 2.0 pF max Load Capacitance (CL) 8 pF Aging +/-2ppm/year Insulation Resistance 500 MΩ min./DC 100V Marking Laser Marking Unit Weight 0.017+/-0.005 g TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4/7 Mechanical Dimensions (mm): Base Recommended Land Pattern: (unit: mm) Marking: Line 1: Frequency (16.00) Line 2: TST Logo + Crystal Product Code + Date Code + Traceability code ( 1 or 2 letters, underline or no underline) Pin#2 Pin#1 Pin#3 Pin#4 The inner vision of Pin#1, Pin#4 side is XTAL blank mounting pad. Product Code Table TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5/7 Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z Reel Dimensions (mm): Tape Dimensions (mm): Direction of Feed [NOTE] 1 UNIT : mm. 2 UNLESS OTHERWISE SPECIFIED TOLERANCEON DIM. +/-0.1mm. 3 MATERIAL : CONDUCTIVE POLYSTYRENE. 4 COLOR : BLACK. 5 10 PITCHES CUMULATIVETOLERANCE +/-0.2mm. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6/7 Packing Quantity/Packing: 3K pcs maximum per reel Reflow Profile: Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7/7 Reliability Specifications (AEC-Q200) Test name Reference standard Test process / method Mechanical characteristics resistance to Soldering heat (IR reflow) Temp./ Duration : 265°C /10sec ×2 times Total time : 4min.(IR-reflow) Vibration Total peak amplitude : 1.5mm Vibration frequency : 10 to 2000 Hz Sweep period : 20 minute Vibration directions : 3 mutually perpendicular directions : 3 impacts per axis Acceleration : 6000g's, +20/-0 % Duration : 0.3 ms (total 18 shocks) Waveform : Half-sine Solder Temperature:265±5°C Duration time: 5±0.5 seconds. Mechanical Shock Solderability EIAJED-4701 -300(301)M(II) MIL-STD 202G method 204 MIL-STD 202G method 213 J-STD-002 Environmental characteristics Thermal Shock Heat cycle conditions -55 ℃ (30min) ←→ 125 ℃ (30min) * cycle time : 1000 times MIL-STD 883G method 1010.8 Humidity test Temperature : 85 ± 2 °C Relative humidity : 85% Duration : 1000 hours Temperature : 125 ± 2 °C Duration : 1000 hours MIL-STD 202G method 103 Cold resistance Temperature : -40 ± 3 °C (Low Temp Storage) Duration : 1000 hours IEC 60068-2-1 Dry heat ( Aging test ) TAI-SAW TECHNOLOGY CO., LTD. MIL-STD 202G method 108A TST DCC Release document