TSP1-WF1608H6S2T3-EL-TR70

0.6mm Height Flat Top LED TSP1-WF1608H6S2T3 0.6mm Height Flat Top LED Features • • • • • Package in 8mm tape on 7” diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Mono-color type RoHS compliance QSLP1WF1 Applications • Automotive: Backlighting in dashboard and switch • Telecommunication: indicator and backlighting in telephone and fax • Flat backlight for LCD, switches and symbols • General use Descriptions • The SMD series enables smaller board size, higher packing density, reduced storage space, and small equipment • Besides, light weight makes them ideal for miniature applications Device Selection Guide Chip Part No. Material InGaN Emitted Color Pure White Lens Color TSP1-WF1608H6S2T3 Yellow Diffused TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-247-2232 (800)-TAITRON (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Rev. A/PG 070809 Page 1 of 11 0.6mm Height Flat Top LED TSP1-WF1608H6S2T3 Absolute Maximum Ratings (Ta=25°C) Parameter Reverse Voltage Forward Current Power Dissipation Electrostatic Discharge (HBM) Soldering Temperature Operating Temperature Storage Temperature Peak Forward Current (Duty 1/10 @1KHz) Symbol VR IF Pd ESD Tsol Topr Tstg IF Value 5 25 110 150 260 for 5 seconds -40 ~ +85 -40 ~ +90 100 Unit V mA mW V °C °C °C mA Electro-Optical Characteristics (Ta=25°C) Parameter Luminous Intensity Viewing Angle Forward Voltage Reverse Current Symbol IV 2θ1/2 VF IR Min. 28.5 ----2.7 ----Typ. ----130 --------Max. 72.0 ----3.15 50 Unit mcd deg V μA VR=5V Condition IF =5mA Bin Rank Of Luminous Intensity & Forward Voltage Symbol IV Bin Code N P 15 VF 16 17 Min. 28.5 45.0 2.70 2.85 3.00 Max. 45.0 72.0 2.85 3.00 3.15 Unit mcd IF =5mA V IF =5mA Condition Notes: 1. Tolerance of Luminous Intensity ±15% 2. Tolerance of Forward Voltage ±0.1V Rev. A/PG 070809 www.taitroncomponents.com Page 2 of 11 0.6mm Height Flat Top LED TSP1-WF1608H6S2T3 Typical Electro-Optical Characteristics Curves Spectrum Distribution Relative luminous intensity (%) Forward Current vs. Forward Voltage Forward Current IF (mA) Wavelength λp(nm) Luminous Intensity vs. Ambient Temperature Relative luminous intensity (%) Relative luminous intensity (%) Forward Voltage (VF)-volts Luminous Intensity vs. Forward Current Ta=25° Ambient Temperature Ta (°C) Forward Current Derating Curve Forward Current IF (mA) Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram (Ta =25°C) Rev. A/PG 070809 www.taitroncomponents.com Page 3 of 11 0.6mm Height Flat Top LED TSP1-WF1608H6S2T3 Chromaticity Coordinates Specifications for Bin Grading IF =5mA Notes: 1. The C.I.E. 1931 chromaticity diagram (Tolerance ±0.01). 2. The products are sensitive to static electricity and care must be fully taken when handling products. Rev. A/PG 070809 www.taitroncomponents.com Page 4 of 11 0.6mm Height Flat Top LED TSP1-WF1608H6S2T3 CIE Chromaticity Diagram Rev. A/PG 070809 www.taitroncomponents.com Page 5 of 11 0.6mm Height Flat Top LED TSP1-WF1608H6S2T3 Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level: 90%, LTPD: 10% No. Items Test Condition Test Hours / Cycles Sample Size Ac/Re 1 Reflow Soldering Temp.: 240°C ±5° Min. 5sec H: +100°C 15min ∫ 5 min L: -40°C 15min H: +100°C 5min ∫ 10 sec L: -10°C 5min 6 Min 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp: 100°C 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp: -55°C 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85°C / 85%RH 1000 Hrs. 22 PCS. 0/1 Rev. A/PG 070809 www.taitroncomponents.com Page 6 of 11 0.6mm Height Flat Top LED TSP1-WF1608H6S2T3 Package Dimensions (In mm) Note: The tolerances unless mentioned is ±0.1mm, Unit = mm Carrier Tape Dimensions Note: The tolerances unless mentioned is ±0.1mm, Unit = mm Rev. A/PG 070809 www.taitroncomponents.com Page 7 of 11 0.6mm Height Flat Top LED TSP1-WF1608H6S2T3 Reel Dimensions Note: The tolerances unless mentioned is ± 0.1mm, Unit = mm Moisture Resistant Packaging Rev. A/PG 070809 www.taitroncomponents.com Page 8 of 11 0.6mm Height Flat Top LED TSP1-WF1608H6S2T3 Ordering Information TS P 1– W F 1608 H6- S2T3 - EL-TR70 Lead Free Tape & Reel 7=7˝ reel 0=3k per reel Factory Location Code Dice Code Height Size in mm Flat Top White Convex PCB Type Taitron SMD Led Precautions for Use 1. Over-current-proof Customer must apply resistor for protection, otherwise slight voltage will cause large current change (Burn will be happen). 2. Storage 2.1 The operation of Temperature and RH are: 5°C~35°C, RH 60%. 2.2 Once the package is opened, the products should be used within a week. Otherwise they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year (from production date). 2.3 If opened more than one week in an atmosphere 5°C~35°C, RH 60%, they should be treated at 60°C±5°C for 15 hrs. 2.4 When you discover that desiccant in the package has a pink color (Normal= blue), you should treat them in the same condition as 2.3. Rev. A/PG 070809 www.taitroncomponents.com Page 9 of 11 0.6mm Height Flat Top LED TSP1-WF1608H6S2T3 Soldering Iron: Basic spec is ≤5 sec when 260°C.If temperature is higher, time should be shorter (+10°C→ -1sec). Power dissipation of Iron should be smaller than 15W, and temperature should be controllable. Surface temperature of the device should be under 230°C. Rework 1. Customer must finish rework within 5 sec under 245°C. 2. The head of iron can not touch copper foil. 3. Twin-head type is preferred. Rev. A/PG 070809 www.taitroncomponents.com Page 10 of 11 0.6mm Height Flat Top LED TSP1-WF1608H6S2T3 How to contact us US HEADQUARTER 28040 WEST HARRISON PARKWAY, VALENCIA, CA 91355-4162 Tel: (800) TAITRON (800) 247-2232 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: taitron@taitroncomponents.com Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE CROSS REGION PLAZA, 899 LINGLING ROAD, SUITE 18C, SHANGHAI, 200030, CHINA Tel: +86-21-54249942 Fax: +86-21-5424-9931 Rev. A/PG 070809 www.taitroncomponents.com Page 11 of 11