AH083F238001-T

[ For General Electronic Equipment (General Environment) ] Notice for TAIYO YUDEN Products Please read this notice before using the TAIYO YUDEN products. REMINDERS ■ Product information in this catalog is as of October 2017. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or use of our products. Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or equipment incorporating our products, which are caused under the conditions other than those specified in this catalog or individual product specification sheets. ■ Please contact TAIYO YUDEN for further details of product specifications as the individual product specification sheets are available. ■ Please conduct validation and verification of our products in actual condition of mounting and operating environment before using our products. ■ The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC) and medical equipment classified as Class I or II by IMDRF. Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation, automotive powertrain control system, train control system, and ship control system, traffic signal equipment, disaster prevention equipment, medical equipment classified as Class III by IMDRF, highly public information network equipment including, without limitation, telephone exchange, and base station). Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control equipment, undersea equipment, military equipment). *Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g., in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN. Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment. When our products are used even for high safety and/or reliability-required devices or circuits of general electronic equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to install a protection circuit as necessary. Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above. ■ Information contained in this catalog is intended to convey examples of typical performances and/or applications of our products and is not intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights. ■ Please note that the scope of warranty for our products is limited to the delivered our products themselves and TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products. Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in accordance with such agreement. ■ The contents of this catalog are applicable to our products which are purchased from our sales offices or authorized distributors (hereinafter“TAIYO YUDEN’ s official sales channel” ). Please note that the contents of this catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’ s official sales channel. ■ Caution for Export Some of our products listed in this catalog may require specific procedures for export according to“U.S. Export Administration Regulations” ,“Foreign Exchange and Foreign Trade Control Law”of Japan, and other applicable regulations. Should you have any questions on this matter, please contact our sales staff. 18 CHIP ANTENNAS CHIP ANTENNAS REFLOW REFLOW ■PARTS NUMBER A F △ ② ① 2 1 6 ③ M ④ ①Series name Code AH AF 2 4 5 0 0 ⑤ 1 - ⑥ T ⑦ ④Special code Code F M N Series name Multilayer antenna Helical antenna ②Electrode code Code △ Electrode code With plating Special code Inverted F Mono pole Mono pole（Dual） ⑤Frequency Code Frequency［MHz］ （example） 1575 1574.397～1576.443 2450 2400～2500 5550 3100～8000 1.Describe Center Frequency 2.Lower Frequency for Dual band Dimensions（case size）［mm］ 2.0×1.25 2.5×1.6 3.2×1.6 8.0×3.0 10.0×4.0 8.0×6.0 ⑥Spec code Code 01～ S1～ Applicable to AH 104F ⑦Packaging Code -T Packaging Taping HIGH FREQUENCY PRODUCTS ③Dimensions（case size） Code 212 216 316 083 104 086 △＝Blank space Spec code ■EXTERNAL DIMENSIONS / STANDARD QUANTITY AH 212M type, AF 216M type AH 316M type AH 083F type W Direction mark Direction mark L L T b T E AH 104F type b b c a a AH 086M type Feed mark Direction mark W b c b AH 104N type Feed mark L W T E Direction mark Feed mark L W Direction mark W W L T Feed mark L T T b b c b b a b a Type AF 216M AH 212M AH 316M AH 083F AH 104F AH 104N AH 086M c b c b c b b a ｂ a ｂ a ｂ a L W T E a b c 2.5±0.2 2＋0.3/－0.1 3.2±0.15 8±0.3 10±0.3 10±0.3 8±0.3 1.6±0.2 1.25±0.2 1.6±0.15 3±0.3 4±0.3 4±0.3 6±0.3 1.6±0.2 0.85±0.2 0.5±0.1 1±0.3 1±0.3 1±0.3 1±0.3 0.5±0.3 0.5±0.3 0.5±0.2 - 3.1±0.3 2.5±0.3 3±0.3 1.8±0.2 1.0min. 1±0.3 1±0.3 0.8±0.3 1±0.3 1.15±0.3 1±0.3 1.5±0.3 - Standard quantity［pcs］ Embossed tape 2000 4000 3000 1000 2000 2000 1000 Unit：mm ■PARTS NUMBER Applications GPS W-LAN（2.4GHｚ） Bluetooth® WiMAX（2.5GHｚ） ZigBee W-LAN（2.4GHｚ/5GHｚ） UWB & WiMAX（3.5GHz） Part number AH 316M157501 AF 216M245001 AH 212M245001 AH 316M245001 AH 083F245001 AH 104F2450S1 AH 104F2650S1 AH 104N2450D1 AH 086M555003 External dimensions（L×W×T）［mm］ 3.2×1.6×0.5 2.5×1.6×1.6 2.0×1.25×0.85 3.2×1.6×0.5 8.0×3.0×1.0 10.0×4.0×1.0 10.0×4.0×1.0 10.0×4.0×1.0 8.0×6.0×1.0 Center frequency［MHｚ］ 1575 2450 2450 2450 2450 2450 2650 2450/5400 5550 chipantenna_e-E05R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 18 165 ■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS Typical characteristics on TAIYO YUDEN evaluation board ●AH 316M157501 Typical characteristics of VSWR Typical characteristics of radiation pattern （@1.575GHz） ●AF 216M245001 HIGH FREQUENCY PRODUCTS Typical characteristics of VSWR Typical characteristics of radiation pattern （@2.45GHz） ●AH 212M245001 Typical characteristics of VSWR Typical characteristics of radiation pattern （@2.45GHz） ●AH 316M245001 Typical characteristics of VSWR Typical characteristics of radiation pattern （@2.45GHz） ●AH 083F245001 Typical characteristics of VSWR Typical characteristics of radiation pattern （@2.45GHz） chipantenna_e-E05R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 166 18 ■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS Typical characteristics on TAIYO YUDEN evaluation board ●AH 104F2450S1 Typical characteristics of VSWR Typical characteristics of radiation pattern （@2.45GHz） ●AH 104N2450D1 Typical characteristics of radiation pattern （@2.45GHz） Typical characteristics of VSWR（5GHz band） Typical characteristics of radiation pattern （@5.25GHz） HIGH FREQUENCY PRODUCTS Typical characteristics of VSWR（2GHz band） ●AH 086M555003 Typical characteristics of VSWR Typical characteristics of radiation pattern （@3.96GHz） chipantenna_e-E05R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) . 18 167 CHIP ANTENNAS ■PACKAGING ①Minimum Quantity Standard Quantity (pcs) Embossed Tape 2000 3000 1000 4000 Type AF216M, AH104F, AH104N AH316M AH083F, AH086M AH212M ②Tape Material ●Embossed Tape Top tape Chip Filled Sprocket hole Base tape Chip cavity Chip ③Taping Dimensions ●Embossed Tape Sprocket hole φ1.5＋0.1/－0 (φ0.059＋0.004/-0) A 1.75±0.1 (0.069±0.004） D C B F Type AF216M AH316M AH083F AH104F, AH104N AH086M AH212M 4.0±0.1 (0.157±0.004) 2.0±0.1 (0.079±0.004) Chip Cavity A B 1.85±0.2 2.75±0.2 （0.073±0.008） （0.108±0.008） 1.9±0.2 3.5±0.2 （0.075±0.008） （0.138±0.008） 3.35±0.2 8.35±0.2 （0.132±0.008） （0.329±0.008） 4.35±0.2 10.35±0.2 （0.171±0.008） （0.407±0.008） 6.25±0.2 8.26±0.2 （0.246±0.008） （0.325±0.008） 1.5±0.2 2.3±0.2 （0.059±0.008） （0.091±0.008） Tape Widthness C D 8±0.2 3.5±0.1 （0.315±0.008） （0.138±0.004） 8±0.2 3.5±0.1 （0.315±0.008） （0.138±0.004） 16±0.3 7.5±0.1 （0.630±0.012） （0.295±0.004） 24±0.3 11.5±0.1 （0.945±0.012） （0.435±0.004） 16±0.3 7.5±0.1 （0.630±0.012） （0.296±0.004） 8±0.3 3.5±0.1 （0.315±0.012） （0.138±0.004） Insertion Pitch F 4±0.1 （0.157±0.004） 4±0.1 （0.157±0.004） 8±0.1 （0.315±0.004） 8±0.1 （0.315±0.004） 12±0.1 （0.473±0.004） 4±0.1 （0.157±0.004） Tape Thickness max. K T 1.95 0.3 （0.077） （0.012） 0.85 0.3 （0.033） （0.012） 1.55 0.3 （0.061） （0.012） 1.55 0.3 （0.061） （0.012） 1.3 0.3 （0.051） （0.012） 1.5 0.3 （0.059） （0.012） Unit：mm （inch） ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_pack_e-E05R01 ④Leader and Blank Portion ⑤Reel size Type AF216M, AH212M AH316M AH083F AH104F AH104N AH086M A 178±2.0 （7.0±0.08） 178±2.0 （7.0±0.08） 330±2.0 （13.0±0.08） 330±2.0 （13.0±0.08） B 50 min. （2.0 min.） 50 min. （2.0 min.） 100±1.0 （3.94±0.04） 100±1.0 （3.94±0.04） W 10.0±1.5 （0.394±0.06） 17.0±1.0 （0.67±0.04） 25.5±1.0 （1.0±0.04） 17.0±1.0 （0.67±0.04） T 3.0 max. （0.12 max.） 2.5 max. （0.1 max.） 3.0 max. （0.12 max.） 2.5 max. （0.1 max.） Unit：mm（inch） ⑥Top Tape Strength The top tape requires a peel-off force of 0.1～0.7N in the direction of the arrow as illustrated below. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_pack_e-E05R01 CHIP ANTENNAS ■RELIABILITY DATA 1. Operating Temperature Range Specified Value －40～＋85℃ 2. Storage Temperature Range Specified Value －40～＋85℃ Test Methods and Remarks ※with being taped, －20～＋40℃ 3. Solderability Specified Value At least 90% of immersed terminal surface is covered by new solder. Test Methods and Remarks Solder temperature Duration Preconditioning : 230±5℃ : 3±1 sec. : Preheating at 150℃ after immersion into flux. 4. Thermal Shock Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Remarks 1 hour of recovery after 10 times of 30min.immersion alternately at －40℃ and 85℃ of temperature, followed by evaluating electrical characteristics. 5. High Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Remarks 1 hour of recovery under standard condition after 96 hours recovery with 85℃ of temperature, followed by evaluating electrical characteristics. 6. Low Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Remarks 1 hour of recovery under standard condition after 96 hours recovery with －40℃ of temperature, followed by evaluating electrical characteristics. 7. Humidity Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Remarks 1 hour of recovery under standard condition after 96 hours recovery with 60℃ of temperature, 90～95% relative humidity followed by evaluating electrical characteristics. 8. Resistance to Reflow Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Remarks Two times of reflow soldering by recommended profile attached, followed by evaluating electrical characteristics. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_reli_e-E04R01 CHIP ANTENNAS ■PRECAUTIONS 1. PCB Design Precautions ◆Land pattern design Please do not arrange the surface and inside layer pattern near the antenna mounting area. ◆Land pattern design Land pattern dimension examples and recommended antenna land pattern AF216M AH316M Type AF216M AH212M AH083F AH104F AH104N AH086M L 2.5 2 Dimensions P A 1.5 3 1 3 Unit：mm Technical Considerations 2. Soldering ◆Conditions of Reflow soldering (for reference) ・ Pb Free Reflow Profile Technical Considerations Temperature（℃） 300 200 Peak 260℃ Max. Within 10sec. Slow cooling 100 0 ・ Reflow profile Preheating150℃ Heating above 230℃ 60sec. Min. 40sec. Max. ※ Components should be preheated to within 100 to 130℃ from soldering temperature. ※ Assured to be reflow soldering for 2 times. Note : The above profiles are the maximum allowable soldering condition, therefore these profiles are not always recommended. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_prec_e-E05R01 3. Storage Conditions Precautions ◆Storage conditions 1. The Products should not be used in the following environments : ・ exposure to special gases such as (C12, NH3, SOx, NOx) ・ exposure to volatile gas or inflammable gas ・ exposure to a lot of dust ・ exposure to water or condensation ・ exposure to direct sunlight or freezing 2. The Products should be kept in the following conditions : ・ Temperature : －10～＋40℃ ・ Humidity : 70％RH max. 3. The products should be used within 6 months after delivery. In case of storage over 6 months, solderability shall be checked before actual usage. ■ Please contact our offices for further details of specifications. All of the standard values listed here are subject to change without notice due to technical improvements. Therefore, please check the specifications carefully before use. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . chipantenna_prec_e-E05R01