for General Electronic Equipment
Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product Information in this Catalog
Product information in this catalog is as of October
2020. All
All of
of the
the
January 2021.
contents specified herein and production status of the products listed in
this catalog are subject to change without notice due to technical
improvement of our products, etc. Therefore, please check for the latest
information carefully before practical application or use of our products.
(4) Powe r g e n e r atio n c o ntro l e quip m e nt (nu c le a r p owe r,
hydroelectric power, thermal power plant control system, etc.)
(5) Undersea equipment (submarine repeating equipment,
underwater work equipment, etc.)
(6) Military equipment
(7) Any other equipment requiring extremely high levels of safety
and/or reliability equal to the equipment listed above
Please note that TAIYO YUDEN shall not be in any way responsible
for any damages and defects in products or equipment incorporating
our products, which are caused under the conditions other than those
specified in this catalog or individual product specification sheets.
*Notes:
1. There is a possibility that our products can be used only
for aviation equipment that does not directly affect the safe
operation of aircraft (e.g., in-flight entertainment, cabin
light, electric seat, cooking equipment) if such use meets
requirements specified separately by TAIYO YUDEN. Please
be sure to contact TAIYO YUDEN for further information
before using our products for such aviation equipment.
2. Implantable medical devices contain not only internal unit
which is implanted in a body, but also external unit which is
connected to the internal unit.
■ Approval of Product Specifications
Ple a se c ont ac t TA IYO YUD EN for fur the r det a ils of p ro duc t
specifications as the individual product specification sheets are
available. When using our products, please be sure to approve our
product specifications or make a written agreement on the product
specification with TAIYO YUDEN in advance.
■ Pre-Evaluation in the Actual Equipment and Conditions
Please conduct validation and verification of our products in actual
conditions of mounting and operating environment before using our
products.
■ Limited Application
1. Equipment Intended for Use
The products listed in this catalog are intended for generalpurpose and standard use in general electronic equipment (e.g.,
AV equipment, OA equipment, home electric appliances, office
equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and other equipment
specified in this catalog or the individual product specification sheets.
TAIYO YUDEN has the line-up of the products intended for
use in automotive electronic equipment, telecommunications
infrastructure and industrial equipment, or medical devices
classified as GHTF Classes A to C (Japan Classes I to III).
Therefore, when using our products for these equipment,
please check available applications specified in this catalog
or the individual product specification sheets and use the
corresponding products.
2. Equipment Requiring Inquiry
Please be sure to contact TAIYO YUDEN for further information
before using the products listed in this catalog for the following
equipment (excluding intended equipment as specified in this
catalog or the individual product specification sheets) which may
cause loss of human life, bodily injury, serious property damage
and/or serious public impact due to a failure or defect of the
products and/or malfunction attributed thereto.
(1) Transportation equipment (automotive powertrain control
system, train control system, and ship control system, etc.)
(2) Traffic signal equipment
(3) Disaster prevention equipment, crime prevention equipment
(4) Medical devices classified as GHTF Class C (Japan Class III)
(5) H i g h l y p u b l i c i n f o r m a t i o n n e t wo r k e q u i p m e n t , d a t a processing equipment (telephone exchange, and base
station, etc.)
(6) Any other equipment requiring high levels of quality and/or
reliability equal to the equipment listed above
3. Equipment Prohibited for Use
Please do not incorporate our products into the following
equipment requiring extremely high levels of safety and/or
reliability.
(1) Aerospace equipment (artificial satellite, rocket, etc.)
(2) Aviation equipment *1
(3) Medical devices classified as GHTF Class D (Japan Class IV),
implantable medical devices *2
4. Limitation of Liability
Please note that unless you obtain prior written consent of TAIYO
YUDEN, TAIYO YUDEN shall not be in any way responsible for
any damages incurred by you or third parties arising from use of
the products listed in this catalog for any equipment that is not
intended for use by TAIYO YUDEN, or any equipment requiring
inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN
as described above.
■ Safety Design
When using our products for high safety and/or reliability-required
equipment or circuits, please fully perform safety and/or reliability
evaluation. In addition, please install (i) systems equipped with
a protection circuit and a protection device and/or (ii) systems
equipped with a redundant circuit or other system to prevent an
unsafe status in the event of a single fault for a failsafe design to
ensure safety.
■ Intellectual Property Rights
Information contained in this catalog is intended to convey examples
of typical performances and/or applications of our products and is
not intended to make any warranty with respect to the intellectual
property rights or any other related rights of TAIYO YUDEN or any
third parties nor grant any license under such rights.
■ Limited Warranty
Please note that the scope of warranty for our products is limited to
the delivered our products themselves and TAIYO YUDEN shall not
be in any way responsible for any damages resulting from a failure
or defect in our products. Notwithstanding the foregoing, if there is
a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company,
TAIYO YUDEN will warrant our products in accordance with such
agreement.
■ TAIYO YUDEN’s Official Sales Channel
The contents of this catalog are applicable to our products which are
purchased from our sales offices or authorized distributors (hereinafter
“TAIYO YUDEN’
s official sales channel”). Please note that the contents
of this catalog are not applicable to our products purchased from any
seller other than TAIYO YUDEN’
s official sales channel.
■ Caution for Export
Some of our products listed in this catalog may require specific
procedures for export according to“U.S. Export Administration
Regulations”,“Foreign Exchange and Foreign Trade Control Law”
of Japan, and other applicable regulations. Should you have any
questions on this matter, please contact our sales staff.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
2
21
for General Electronic Equipment
FBAR/SAW DEVICES for MOBILE COMMUNICATIONS
FBAR/SAW DEVICES for MOBILE COMMUNICATIONS
REFLOW
■PARTS NUMBER
(A) Previous Rule (applied products registered on March 31, 2010 or before.)
F
A R
①
②
F
5
③
Q
④
A
⑤
⑥
9
1
5
M
⑦
0
0
⑧
M 2
⑨
①Family
④Package code
②Common sign
⑤Product code
A
K
⑩
⑪
X
⑫
⑥Common sign
③Series name
Code
D5
D6
J5
F5
F6
G5
G6
Product
Duplexer
Duplexer
Triplexer
Device
Device
Dual Devices
Dual Devices
Frequency Range［MHｚ］
700 - 1000
1000 - 5000
700 - 1000
700 - 1000
1000 - 5000
700 - 1000
1000 - 5000
⑦Frequency
⑧Common sign
⑨Internal code
⑩Internal code
⑪Custom code
⑫Packaging
(B) New Rule (applied to products registered on April 1, 2010 or later.)
D
6
HIGH FREQUENCY
PRODUCTS
①
D
②
A
③
1
G
8 4
④
2
K
2
⑤
C
7
⑦
⑥
Y
⑧
②Package code
①Series name
Code
Product
Frequency Range［MHｚ］
D5
Duplexer
700 - 1000
D6
Duplexer
1000 - 5000
J5
Triplexer
700 - 1000
F5
Device
700 - 1000
F6
Device
1000 - 5000
G5
Dual Devices
700 - 1000
G6
Dual Devices
1000 - 5000
H6
Triple Devices
1000 - 5000
K6
Quadplexer
1000 - 5000
*For further details, please contact to TAIYO YUDEN CO., LTD.
③Product code
④Frequency
⑤Internal code
⑥Internal code
⑦Custom code
⑧Packaging
■EXTERNAL DIMENSIONS
2.0×1.6×0.5
1.8×1.4×0.5（Duplexer）
1.8+0.0/-0.2
1.4×1.0×0.5
0.5max
1.4+0.0/-0.2
index
4-0.625 4-0.325
4-0.23
4-0.46
0.575
7-0.23
8-0.30
1.1×0.9×0.5
Unit : mm
1.8×1.4×0.5（Dual Filter）
1.5×1.1×0.5
1.50±0.1
0.5max
1.10±0.1
index
1.17
0.39
0.39
0.78 0.18
0.18
0.18
0.18 0.21
0.49
0.21
Unit：mm
sawfilter_e-E09R01.doc
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
106
21
for General Electronic Equipment
■PARTS NUMBER
●Duplexers
System
Band 1
Package Size［mm］
1.8×1.4×0.5 max.
1.8×1.4×0.5 max.
1.8×1.4×0.5 max.
1.8×1.4×0.47 max.
1.8×1.4×0.57 max.
1.8×1.4×0.57 max.
1.8×1.4×0.44 max.
1.6×1.2×0.44 max.
1.8×1.4×0.6 max.
1.8×1.4×0.6 max.
1.8×1.4×0.38 max.
1.8×1.4×0.44 max.
1.8×1.4×0.5 max.
1.8×1.4×0.5 max.
1.8×1.4×0.5 max.
1.8×1.4×0.5 max.
1.8×1.4×0.47 max.
1.8×1.4×0.54 max.
1.8×1.4×0.54 max.
1.8×1.4×0.54 max.
1.8×1.4×0.44 max.
1.8×1.4×0.54 max.
1.8×1.4×0.5 max.
1.8×1.4×0.6 max.
1.8×1.4×0.6 max.
1.6×1.2×0.6 max.
1.8×1.4×0.5 max.
1.8×1.4×0.44 max.
1.8×1.4×0.5 max.
1.8×1.4×0.44 max.
1.8×1.4×0.5 max.
1.8×1.4×0.44 max.
1.8×1.4×0.5 max.
1.8×1.4×0.44 max.
1.8×1.4×0.44 max.
1.8×1.4×0.57 max.
1.8×1.4×0.6 max.
1.8×1.4×0.44 max.
1.8×1.4×0.44 max.
1.8×1.4×0.44 max.
Insertion Loss［dB］ Attenuation［dB］ Remarks
1.8/1.8
56/51
1.6/1.7
58/59
1.7/1.8
57/48
Rx : Bal.100ohm
1.7/1.8
57/51
Rx : Bal.100ohm
1.9/2.5
54/54
1.8/2.3
55/55
1.8/2.2
60/56
1.7/2.2
59/54
2.1/2.9
56/55
Rx : Bal.100ohm
2.3/2.1
56/56
1.8/1.9
60/56
1.5/2.1
60/58
1.5/1.7
57/55
1.6/1.8
60/56
1.6/1.8
62/54
Rx : Bal.100ohm
1.4/1.7
58/59
1.4/1.7
58/52
Rx : Bal.100ohm
2.3/2.2
58/57
FBAR
2.0/2.0
58/55
FBAR 2HD Improved
2.0/2.0
61/56
2.1/2.2
50/50
1.8/2.4
56/56
Rx : Bal.100ohm, FBAR
1.7/1.8
58/59
1.3/1.5
58/56
for LTE
1.8/1.9
61/52
1.8/1.9
58/56
1.5/1.9
56/51
Rx : Bal.100ohm
1.2/1.3
58/60
1.65/1.65
63/58
1.5/0.5
66/63
1.9/1.7
58/61
1.2/2.2
50/50
1.25/1.65
65/60
1.8/1.8
55/56
1.3/1.3
60/60
2.5/2.6
57/57
FBAR
1.3/2.0
60/57
2.5/2.6
57/57
1.8/1.9
63/60
2.0/2.0
57/54
●Multiplexers
System
Part number
Package Size［mm］
Band 13+17 Triplexer
J5NA782M0P1H6
2.5×2.0×0.6 max.
Band 1+3 Quadplexer
K6QZ2G140Q3ZC
2.5×2.0×0.8 max.
Insertion Loss［dB］ Attenuation［dB］ Remarks
1.6/1.9
60/49
1.9/1.9
53/55
2.0/1.9
55/57
2.4/2.3
57/58
Band 2
Band 3
Band 4
Band 5
Band 7
Band 8
Band
Band
Band
Band
Band
Band
Band
Band
Band
Band
Band
11
12
12/85
13
14
17
20
21
25
26
28
Band 66
HIGH FREQUENCY
PRODUCTS
Part number
D6DA2G140K2A4
D6DA2G140K2A7
D6RB2G140E1AJ
D6RB2G140E1AL
D6DA1G960K2B1
D6DA1G960K2B2
D6FH1G960A3CY
D6SD1G960G3NZ
D6RB1G960E1HB
D6DA1G842K2C4
D6DA1G842K2C7
D6FH1G842A3CZ
D6DA2G132K2D4
D6DA2G132K2D9
D6RB2G132E1DF
D5DA881M5K2E4
D5RB881M5E1BH
D6HQ2G655DP01
D6HQ2G655DP02
D6HQ2G655DP03
D6DA2G655K2F1
D6HP2G655BP11
D5DA942M5K2G6
D5DA942M5K2S2
D5FH942M5A1SZ
D5SC942M5G3GZ
D5RB942M5E1CF
D6DA1G485K2W1
D5DA737M5K2H2
D5FH737M0K3HZ
D5DA782M0K2J6
D5DA793M0K2K2
D5DA740M0K2L4
D5FC847M0K3NE
D6DA1G503K2Y1
D6HQ1G962DP35
D5DA876M5K2P6
D5FC773M0K3NC
D5FC788M0K3ND
D6DA2G155K2T2
sawfilter_e-E09R01.xls
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
21
107
for General Electronic Equipment
■PARTS NUMBER
HIGH FREQUENCY
PRODUCTS
●W-CDMA / LTE / CDMA 2000 Filters
System
Part number
Band 1 Tx
F6QA1G950M2AA
Band 1, Band 4 Rx
F6QA2G140M2AM
F6QG2G140P2KA
Band 2 Tx BC1 (PCS) Tx
F6QA1G880M2AQ
Band 2 Rx BC1 (PCS) Rx
F6QA1G960M2AP
F6QG1G960P2KT
Band 3 Tx
F6QA1G747M2QS
Band 3 Rx
F6QA1G842M2AN
F6QG1G842P2KD
Band 5 Tx BC0 Tx
F5QA836M5M2AR
Band 5 Rx BC0 Rx
F5QA881M5M2AU
F5QG881M5P2KG
Band 7 Rx
F6QA2G655M2QH
F6QG2G655P2KE
Band 8 Tx
F5QA897M5M2AC
Band 8 Rx
F5QA942M5M2AW
F5QG942M5P2KB
F5QG942M5P2KF
F5FC942M5H4PK
Band 12 Rx
F5QA737M5M2QN
F5QG737M5P2KK
Band 13 Tx
F5QA782M0M2AZ
Band 13 Rx
F5QA751M0M2QM
Band 14
F5QA763M0M2QL
Band 17 Tx
F5QA710M0M2AY
Band 17 Rx
F5QG740M0P2KH
Band 20 Rx
F5QA806M0M2QE
Band 21 Rx
F6QA1G503M2QF
Band 25 Tx
F6QA1G882M2AS
Band 26 Rx
F5QA876M5M2QP
F5QG876M5P2KQ
Band 28 Rx
F5QA773M0M2QC
F5QA788M0M2QB
Band 29 Rx
F5BA722M5M6UW
Band 30 Rx
F6QP2G355R2SE
Band 32 Rx
F6QA1G474H2JS
Band 66 Rx
F6BA2G155M6UU
Band 67 Rx
F5QA748M0M2WF
●W-CDMA / LTE Dual Filters
System
Band 3+1 Rx
（Common Input）
Package Size［mm］
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.44 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.44 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.44 max.
1.1×0.9×0.5 max.
Insertion Loss［dB］ Attenuation［dB］ Remarks
1.8
38
1.9
46
1.7
55
100ohm output
1.7
20
2.8
39
High Att.
2.8
44
100ohm output
2.1
22
2.0
38
3.2
45
100ohm output
1.9
45
High Att.
1.3
51
Low Loss/high Att.
1.5
56
100ohm output
2.5
38
2.5
52
100ohm. High Att.
2.3
28
2.0
48
for LTE
2.2
56
100ohm output
2.2
60
100ohm output for LTE
1.7
47
1.6
53
1.6
55
100ohm output
1.5
56
1.9
50
2.2
49
1.3
33
1.4
65
100ohm output
2.7
41
2.0
52
1.8
23
2.2
49
2.2
59
100ohm output
2.1
52
Block A
2.0
52
Block B
1.6
2.1
50
1.8
1.7
45
1.5
-
Insertion Loss［dB］ Attenuation［dB］ Remarks
Part number
Package Size［mm］
G6QN2G140M2RN
1.5×1.1×0.5 max.
●TDD Filters （TD-SCDMA / TD-LTE）
System
Part number
Band 34 TRx
F6FC2G017H4PC
Band 34 Rx
F6QP2G017R2SF
Bnad 38 TRx
F6KA2G595A4VL
Bnad 38 Rx
F6QA2G595M2QK
F6QB2G595P2BS
Band 39 TRx
F6FC1G900H4PB
Band 39 Rx
F6QA1G900M2WD
Band 40 TRx
F6UG2G350FG27
Band 40 Rx
F6QA2G350M2QA
F6QB2G350P2BH
Package Size［mm］
1.1×0.9×0.44 max.
1.1×0.9×0.5 max.
1.4×1.0×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.44 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
Band 41 TRx
F6FC2G600H4PA
1.1×0.9×0.44 max.
F6FC2G595H4PD
1.1×0.9×0.44 max.
1.7
-
F6FC2G595H4PG
1.1×0.9×0.44 max.
1.5
-
F6HQ2G593AP31
1.8×1.4×0.57 max.
2.7
-
●TDD Dual Filters （TD-SCDMA / TD-LTE）
System
Part number
Band 34 + Band 39 TRx
G6FT2G017G2YA
Band 39 Rx + 41 (BW100MHz)
G6KJ2G605D4AB
TRx (Common Input)
Band 41 Rx + 39 (BW100MHz)
G6QN2G605M2RM
DRx (Common Input)
Band 41 (BW120MHz) Rx + 39Rx
G6QN2G595M2RP
(Common Input)
●Triple Filters
System
Band 39 + Band 34
＋Band 41 (BW120MHz) DRx
LTE /
Band 1 + Band 3 + Band 7 DRx
Package Size［mm］
1.5×1.1×0.44 max.
1.8×1.4×0.5 max.
2.0/1.7
40/52
For B1+B3 CA
Insertion Loss［dB］ Attenuation［dB］ Remarks
1.1
Input Power +29dBm (TDD:50% Duty)
1.3
1.5
Input Power +29dBm
1.9
2.0
Balanced 100ohm
1.1
Input power +29dBm (Duty 50%)
1.5
1.3
2.2
2.8
Balanced 100ohm
Unbal High power design & HPUE
2.1
for CMCC 2535-2655MHz BW120MHz
Unbal Improved IL
High power design & HPUE for CMCC
2535-2655MHz BW120MHz
32.0 @2535-2655MHz(TD-LTE 40%duty5MHz 1RB)
Unbal High power design & HPUE
for Sprint 2496-2690MHz BW194MHz FBAR
Insertion Loss［dB］ Attenuation［dB］ Remarks
1.3/1.4
1 IN / 2 OUT
B41 High power design B41 (2555-2655MHz BW100MHz)
2.1/2.6
for CMCC CA
1.5×1.1×0.5 max.
2.2/1.3
-
1.5×1.1×0.5 max.
2.3/1.3
-
Part number
Package Size［mm］
H6FM2G595T2MZ
1.8×1.4×0.44 max.
Insertion Loss［dB］ Attenuation［dB］ Remarks
1.3/1.4/2.7
-
1 IN / 3 OUT
H6FM2G655T2MY
1.8×1.4×0.44 max.
1.9/2.1/2.3
-
1 IN / 3 OUT
sawfilter_e-E09R01.xls
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
108
21
for General Electronic Equipment
■PARTS NUMBER
●GPS
System
GPS
GPS (GNSS)
GPS+GLONASS+Galileo+Compass
GNSS （L2+L5+B2）
GPS (L1+L5 Dual)
●Others
System
ISM900 (B.W.26MHz)
Wireless LAN / Bluetooth ®
Part number
F6QA1G575H2JF
F6QA1G585M2AT
F6QB1G585P2BQ
F6QA1G581M2QZ
F6QA1G582H2JM
F6FC1G582H4PJ
F6BG1G582R6TT
F6FC1G197H4PF
G6FT1G582G2YB
Package Size［mm］
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.5 max.
1.1×0.9×0.44 max.
1.1×0.9×0.44 max.
1.1×0.9×0.44 max.
1.5×1.1×0.44 max.
Insertion Loss［dB］ Attenuation［dB］ Remarks
0.96
Low loss, High Att.
1.4
1.7
100ohm output
1.4
1.8
Ladder High Att.
1
1.7
100ohm output
1.3
1.0/1.3
-
Part number
FAR-F5QA-915M00-M2AK
Package Size［mm］
1.1×0.9×0.5 max.
Insertion Loss［dB］ Attenuation［dB］ Remarks
1.8
-
F6UG2G441FG29B
F6FC2G441H4PE
1.1x0.9x0.5max.
1.2
-
Low Insertion Loss
High Att. @2.38GHz
Passband 2402.5-2481.5MHz
FBAR
1.1×0.9×0.44 max.
1.0
-
SAW
HIGH FREQUENCY
PRODUCTS
sawfilter_e-E09R01.xls
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
21
109
FBAR/SAW DEVICES for MOBILE COMMUNICATIONS
■PACKAGING
①Minimum Quantity
Type
Duplexer
Quadplexer
Triplexer
Single Filter
Dual Filter
Triple Filter
Size [mm]
2.0×1.6
1.8×1.4
1.6×1.2
2.5×2.0
2.5×2.0
2.0×1.6
1.8×1.4
1.4×1.0
1.1×0.9
1.8×1.4
1.5×1.1
1.8×1.4
Y
Y
Y
U
U
Y
Y
Y
X
Y
Y
Y
Standard
15000
15000
15000
10000
10000
15000
15000
15000
10000
15000
15000
15000
Code & Quantity [pcs]
Option
Z
3000
Z
3000
Z
3000
Z
3000
Z
3000
Z
3000
Z
3000
Z
3000
Y
15000
Z
3000
J
5000
Z
3000
J
5000
②Tape material
g
●Taping dimensions
Type
Duplexer
Quadplexer
Triplexer
Single Filter
Dual Filter
Triple Filter
Size[mm]
2.0×1.6
1.8×1.4
1.6×1.2
2.5×2.0
2.5×2.0
2.0×1.6
1.8×1.4
1.4×1.0
1.1×0.9
1.8×1.4
1.5×1.1
1.8×1.4
a
2.4±0.1
2.2±0.1
1.9±0.05
2.8±0.1
2.8±0.1
2.4±0.1
2.2±0.1
1.7±0.1
1.3±0.1
2.2±0.1
1.8±0.1
2.2±0.1
b
2.0±0.1
1.8±0.1
1.5±0.05
2.3±0.1
2.3±0.1
2.0±0.1
1.8±0.1
1.3±0.1
1.1±0.1
1.8±0.1
1.4±0.1
1.8±0.1
c
1.05±0.05
0.5±0.05
0.5±0.05
1.5+0.1/-0
1.5+0.1/-0
1.05±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
d
1.5+0.1/-0
1.55±0.05
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.55±0.05
1.5+0.1/-0
1.55±0.05
1.55±0.05
1.5+0.1/-0
1.55±0.05
e
0.90-0.05
0.8±0.1
0.55±0.05
1.0+0.1/-0.0
1.0+0.1/-0.0
0.90-0.05
0.8±0.1
0.63±0.05
0.63±0.05
0.8±0.1
0.7±0.1
0.8±0.1
f
0.25±0.05
0.30±0.05
0.20±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.30±0.05
0.20±0.05
0.20±0.05
0.30±0.05
0.25±0.05
0.30±0.05
g
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
2.0±0.05
4.0±0.1
4.0±0.1
4.0±0.1
Unit：mm
●Material of Tape（Conductive）
Tape : Polystyrene
Top cover tape : Polyethylene terephthalate（PET）and Polyethylene
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_pack_e-E09R01
③Top Tape Strength
The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below.
④Reel size
●Material of Reel
Material : Polystyrene＋Carbon
Characteristics : Conform to EIAJ-ET-7200A
Color : Black
Surface resistance（reference value） :109Ω/sq Max.
Code
Quantity
A
X
10,000 pcs
φ180.0 +0.0/-1.5
U
10,000 pcs
φ180.0 +0.0/-1.5
Y
15,000 pcs
φ330.0 ±2.0
J
5,000 pcs
φ180.0 +0.0/-1.5
Z
3,000 pcs
φ180.0 +0.0/-1.5
B
φ66.0 ±0.5
φ66.0 ±0.5
φ100.0 ±1.0
φ66.0 ±0.5
φ66.0 ±0.5
C
φ13.0 ±0.2
φ13.0 ±0.2
φ13.0 ±0.2
φ13.0 ±0.2
φ13.0 ±0.2
W1
9.0 +1.0/-0.0
9.0 +1.0/-0.0
9.4 ±1.0
9.0 +1.0/-0.0
9.0 +1.0/-0.0
W2
11.4 ±1.0
11.4 ±1.0
13.4 ±1.0
11.4 ±1.0
11.4 ±1.0
Unit：mm
⑤Reel label and Reel C-Label sticking and Winding method
●Surface
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_pack_e-E09R01
FBAR/SAW DEVICES for MOBILE COMMUNICATIONS
■RELIABILITY DATA
1. Terminal stregth
Specified Value
No damage to be found.
Bend width 4mm, hold for 5±1 sec.
Test Methods and
Remarks
2. Mechanical shock
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions.
3. Vibration
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a
vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz)
4. Drop 1
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
Drop 3 times onto concrete floor from the height of 1.0m.
5. Drop 2
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m.
6. Temperature cycling
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
Temp. range －40 to ＋100℃. 500cycle.
７. Static humidity
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
SAW
FBAR
: ＋85℃, 90% to 95%RH, apply DC5V, 1000hours.
: ＋85℃, 90% to 95%RH, apply DC0V, 1000hours.
8. High temperature storage life
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
＋100℃, 1000hours.
9. Low temperature storage life
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
－40℃, 1000hours.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_reli_e-E09R01
10. High Temperature Bias
Specified Value
After testing, meet the specified characteristics at a room temperature.
Test Methods and
Remarks
Please refer to individual specifications in detail.
11. Solderbility
Specified Value
More than 90% of area of terminals to be covered with the solder.
A change of the remarkable appearance do not have it.
Test Methods and
Remarks
Lead-free Solder paste, Reflow；Peak temperature 245℃
12. Solder heat resistance
Specified Value
After testing, meet the specified characteristics at a room temperature.
A change of the remarkable appearance do not have it.
◆Recommended temperature profile of reflow soldering
Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu.
Suitable condition for solder heating is differed depending on composition and manufacturing method.
Please contact to solder manufacturer for the details.
Test Methods and
Remarks
※ According to JIS(IEC) standard.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_reli_e-E09R01
FBAR/SAW DEVICES for MOBILE COMMUNICATIONS
■PRECAUTIONS
1. Storage conditions
Precautions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control
temperature and humidity in the storage area. Humidity should especially be kept as low as possible.
・ Recommended conditions
Ambient temperature : －5～＋40℃
Humidity : 40～85%RH
The ambient temperature must be kept below 30℃.
Even under ideal storage conditions, the solderbility of electrodes decreases gradually, so filters should be mounted within 1 year
from the time of delivery.
・ The packaging material should be kept where no chlorine or sulfur exists in the air.
Technical
considerations
◆Storage
1. If the parts are stocked in a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of
terminal electrodes and deterioration of taping/ packaging materials may take place. For this reason, components should be used within 1
year from the time of delivery. If exceeding the above period, please check the solderability before using the filter.
■ Please contact our sales offices for further details of specifications.
All of the standard values listed here are subject to change without notice.
Therefore, please check the specifications carefully before use.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
sawfilter_prec_e-E08R01
工商网监
湘ICP备2023018690号