EBSHSNZWZ

30-May 2018 Ver.1.3 EYSHSNZWZ TAIYO YUDEN CO., LTD. Bluetooth ® low energy module Bluetooth® 5.0 low energy EYSHSNZWZ Data Report The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license. TAIYO YUDEN CO., LTD. 1/29 30-May 2018 Ver.1.3 EYSHSNZWZ TAIYO YUDEN CO., LTD. Document constituent list Control name Control No. General Items Absolute maximum ratings Electrical characteristics Circuit schematic Outline / Appearance Pin Layout Handling Precaution Packaging Specification Antenna application note Design guide Notes Precautions HD-AG-A160195 HD-AM-A160195 HD-AE-A160195 HD-MC-A160195 HD-AD-A160195 HD-BA-A160195 HQ-BA-537 HD-BB-A160195 HQ-BK-002 Document Page 1/6 - 6/6 1/1 1/3 - 3/3 1/3 - 3/3 1/1 1/2 - 2/2 1/2 - 2/2 1/3 - 3/3 1/3 - 3/3 1/2 - 2/2 1/1 1/1 Revision History 30-Jun.-2017 > Ver.1.0 Release 25-Sep.-2017 > Ver.1.1 Update 15-Dec.-2017 > Ver.1.2 Update 30-May -2018 > Ver.1.3 Update TAIYO YUDEN CO., LTD. 2/29 30-May 2018 Ver.1.3 EYSHSNZWZ TAIYO YUDEN CO., LTD. Control No. HD-AG-A160195 (1/6) Control name General Items 1. Scope This specification (“Specification”) applies to the hybrid IC “EYSHSNZWZ”, a Bluetooth® 5.0 low energy module (“Product”) manufactured by TAIYO YUDEN Co., Ltd. (“TAIYO YUDEN”) 2. Description a) User Code : EYSHSNZWZ Type : EYSHSN *User Code may be changed for mass production or other cases. Note: Please use the User Code (EYSHSNZWZ) to order this product b) Chip c) : Nordic Function : Radio frequency transceiver Module. Bluetooth®5.0 conformity. d) Application e) Structure f) Outline : : : g) Marking : nRF52832 (512kB Flash, 64kB RAM) IoT devices, Health & Fitness Equipment, Sensor, Toys Hybrid IC loaded with silicon monolithic semiconductor Containment of hazardous substance in this Product Can meet with RoHS compliance (Pb, Cd, Hg, Cr+6, PBB, PBDE) 28-pin Land Grid Array Part Number, Lot Number, and manufacturer on Shielding Case h) Country of origin ： Japan i) Packaging : Packaging method: Tape & reel + aluminum moisture barrier bag Packaging unit: 2000 *It might be provided as tray at sample stage. TAIYO YUDEN CO., LTD. 3/29 30-May 2018 Ver.1.3 EYSHSNZWZ Control No. HD-AG-A160195 TAIYO YUDEN CO., LTD. (2/6) Control name General Items j) Notes: a. Limitation of Warranty 1) TAIYO YUDEN provides warranties only if the Product is operated under the condition set forth in this Specification. Please note that TAIYO YUDEN shall not be liable for any defect and/or malfunction arising from use of the Product under the terms and conditions other than the operating conditions hereof. In addition when this Product is used under environmental conditions such as over voltage which is not guaranteed, it may be destroyed in short mode. To ensure the security of customer’s product, please add an extra fuse or/and a protection circuit for over voltage. 2) This Product is designed for use in products which comply with Bluetooth® Specifications. TAIYO YUDEN disclaims and is not responsible for any liability concerning infringement by this Product under any intellectual property right owned by third party in case the customer uses this Product in any product which does not comply with Bluetooth® Specifications (the “non-complying products”). Furthermore, TAIYO YUDEN warrants only that this Product complies with this Specification and does not grant any other warranty including warranty for application of the non-complying products. 3) In some cases, TAIYO YUDEN may use replacements as component parts of Products. Such replacement shall apply only to component part of Products, which TAIYO YUDEN deems it possible to replace or substitute according to (i) Scope of Warranty provided in this specification (e.g. Electric Characteristics, Outline, dimension, Conditions of Use, Reliability Tests, Official Standard (Type Approvals etc.)) and (ii) Quality of Products. TAIYO YUDEN also ensures traceability of such replacement on production lot basis. b. Instruction for Use (CAUTION) 1) Because Product is not designed for radiation durability, please refrain from exposing Product to radiation in the use. 2) Communication between this Product and other might not be established nor maintained depending upon radio environment or operating condition of this Product and other products with wireless technology. 3) This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices. 4) This Product mentioned in this Specification is manufactured for use in Health & Fitness Equipment, Sensor, Toys. Before using this Product in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required, the applicability and suitability of this Product must be fully evaluated by the customer at its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added in design stage, all at the customer’s sole risk. TAIYO YUDEN CO., LTD. 4/29 30-May 2018 Ver.1.3 EYSHSNZWZ Control No. HD-AG-A160195 TAIYO YUDEN CO., LTD. (3/6) Control name General Items 5) Japan Regulatory Information a) This Product is a radio system and obtained certification of construction type combined with the specific antenna. b) Please ensure that your product has a label with the following certification mark at easily viewable location. If your product is too small to have the label, please place it in the instruction manual and package of your product. The mark diameter shall be equal or greater than 3mm. In case your product does not have the label with the following certification mark, you or your customer who uses your product may be against the Radio Law and subjected to criminal punishment. TAIYO YUDEN shall not be liable for any loss or damage incurred by you or your customer arising from use of your product which does not have following certification mark. This product has a radio system which was approved as a radio station in a low power data communication system based on the Radio Law. EYSHSN : 001-A10996 6) Canada Regulatory Information a) This device complies with Industry Canada’s applicable licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. b) This product is certified as type of the portable device with Industry Canada Rules. To maintain compliance with RF Exposure requirement,please use within specification of this product. Ce produit est certifié comme type de l'appareil portable avec Industrie Règles de Canada. Pour maintenir l'acquiescement avec exigence Exposition de RF, veuillez utiliser dans spécification de ce produit. - IC: 4389B-EYSHSN TAIYO YUDEN CO., LTD. 5/29 30-May 2018 Ver.1.3 EYSHSNZWZ Control No. HD-AG-A160195 TAIYO YUDEN CO., LTD. (4/6) Control name General Items c) Please notify certified ID by either one of the following method on your product. -Contains IC : 4389B-EYSHSN Specifiez ID certifiée dans votre produit par une de méthode suivante. -Contains IC : 4389B-EYSHSN 7) FCC Regulatory Information a) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. b) Please notify certified ID by either one of the following method on your product. -Contains Transmitter Module FCC ID: RYYEYSHSN -Contains FCC ID: RYYEYSHSN c) CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the use’s authority to operate the equipment. d) This product is certified as type of the portable device with FCC Rules. To maintain compliance with RF Exposure requirement, please use within specification of this product. e) The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. f) This module can change the output power depending on the circumstances by the application software which is developed by module installer. Any end user cannot change the output power. TAIYO YUDEN CO., LTD. 6/29 30-May 2018 Ver.1.3 EYSHSNZWZ Control No. HD-AG-A160195 TAIYO YUDEN CO., LTD. (5/6) Control name General Items 8) CE Regulatory Information a) When your end product installs this module, it is required to proceed additional certification processes before placing on the market in EU member states to make your products fully comply with relative EU standards. b) TAIYO YUDEN can provide you the test reports of conducted measurement portion for the radio module. You can utilize the test reports for the certification processes of your end product as it requires radio testing. c. Term of Support 1) In the case that customer requests TAIYO YUDEN to customize the hardware of this Product in order to meet such customer’s specific needs, TAIYO YUDEN will make commercially reasonable effort to modify such hardware or software at customer’s expense; provide however, the customer is kindly requested to agrees it doesn’t mean that TAIYO YUDEN has obligations to do so even in the case it is technically difficult for TAIYO YUDEN. 2) Any failure arising out of this Product will be examined by TAIYO YUDEN regardless of before or after mass production. Customer agrees that once such failure is turned out not to be responsible for TAIYO YUDEN after aforesaid examination, some of the technical support shall be conducted by TAIYO YUDEN at customer’s expense; provided however, exact cost of this technical support can be agreed through the negotiation by the parties. 3) Do not alter hardware and/or software of this Product. Please note that TAIYO YUDEN shall not be liable for any problem if it is caused by customer's alteration of Hardware without Taiyo Yuden's prior approvals. 4) TAIYO YUDEN does not guarantee functions and performances which depend on the customer's firmware. TAIYO YUDEN does not assume liabilities for defects and failures (i) in functions, performances and quality of the Customer's product incorporating the Products and (ii) which may occur as the Product is incorporated in the Customer's product. d. Caution for Export Control This Product may be subject to governmental approvals, consents, licenses, authorizations, declarations, filings, and registrations for export or re-export of the Product, required by Japanese Foreign Exchange and Foreign Trade Law (including related laws and regulations) and/or any other country’s applicable laws or regulations related to export control. In case you will export or re-export this Product, you are strongly recommended to check and confirm, before exporting or re-exporting, necessary procedures for export or re-export of this Product which is required by applicable laws and regulations, and if necessary, you have to obtain necessary and appropriate approvals or licenses from governmental authority at your own risk and expense. e. Term of Warranty TAIYO YUDEN warrants only that this Product is in conformity with this Specification for one year after purchase and shall in no event give any other warranty. TAIYO YUDEN CO., LTD. 7/29 30-May 2018 Ver.1.3 EYSHSNZWZ Control No. HD-AG-A160195 TAIYO YUDEN CO., LTD. (6/6) Control name General Items f. Items of the Specification 1) Any question arising from the Specification shall be solved in good faith through mutual discussion by the parties hereof. 2) The language of this “General items” is Japanese and this “General items” shall be interpreted by Japanese Any copies of translation is a reference purpose only and is not binding on both parties hereto. g. Special note 1) Taiyo Yuden writes firmware for and fixed SoftDevice (s132_nrf52_5.0.0_softdevice.hex) to this product. Customer writes firmware that is match the customer applications including SoftDevice at the customer's own responsibility. 2) The Electrical Characteristics defined in this Specification are of the module with above Firmware (s132_nrf52_5.0.0_softdevice.hex). If other firmware developed by Customer is installed, the characteristics may differ from the defined value in the Electrical Characteristics. Bluetooth qualification and radio type approval may become invalid. 3) EYSHSN series module is qualified as PHY only with Component category by Bluetooth SIG. The QDID of this module is 98386. The final product needs to get qualification as End product combining with PHY (module), SoftDevice and Profile before selling the product. The combination of Link and Host layer is differ with SoftDevice. Please refer to following combination and consult with your qualification body and BQC. TAIYO YUDEN CO., LTD. 8/29 30-May 2018 Ver.1.3 EYSHSNZWZ TAIYO YUDEN CO., LTD. Control No. HD-AM-A160195 (1/1) Control name Absolute maximum ratings Absolute maximum ratings Symbol Parameter VCC_NRF Min. Max. Units -0.3 +3.9 V 0 V GND VIO, VCC_NRF≤3.6V -0.3 VCC_NRF+ 0.3 V VIO, VCC_NRF>3.6V -0.3 +3.9 V Storage temperature -40 +85 Deg-C 1 kV 100 V MSL Moisture Sensitivity Level 3 ESD HBM Human Body Model ESD MM Machine Model Endurance Flash Memory Endurance 10000 Retention Flash Memory Retention 10 years write/erase cycles At 40 deg-C Number of times a 512 byte block can be written 32bit writes 181 times between erase cycles TAIYO YUDEN CO., LTD. 9/29 30-May 2018 Ver.1.3 EYSHSNZWZ TAIYO YUDEN CO., LTD. Control No. HD-AE-A160195 (1/3) Control name Electrical characteristics Electrical characteristics Recommendation operating range Symbol Parameter VCC_NRF Supply voltage, normal mode tR_VCC_NRF Supply rise time (0V to 1.7V)*1 TA Operation temperature Min. Typ. Max. Units 1.7 3.0 3.6 V 60 ms 85 Deg-C -40 25 *1 The on-chip power-on reset circuitry may not function properly for rise times outside the specified interval. Also after power off, it must start up from below 0.3V. The on-chip power-on reset circuitry may not function properly. DC Specifications The Specification applies for Topr.= 25 degrees C, VCC_NRF = 3.0V Symbol Parameter (condition) Min. Typ. Max. Units VIH Input high voltage 0.7 VCC_NRF VCC_NRF V VIL Input low voltage GND 0.3 VCC_NRF V VOH Output high voltage (high drive 5 mA) VCC_NRF-0.4 VCC_NRF V VOL Output low voltage (high drive 5 mA) GND GND+0.4 V RPU Pull-up resistance 11 13 16 kohm RPD Pull-down resistance 11 13 16 kohm ITX,+4dBm TX only run current (DCDC, 3V) ,DCDC PRF=+4 dBm ITX,+4dBm TX only run current IRX,1M, RX only run current (DCDC, 3V) DCDC 1Mbps BLE IRX,1M RX only run current IRX,2M, RX only run current (DCDC, 3V) DCDC 2Msps BLE IRX,2M RX only run current IOFF ION IRAM PRF=+4 dBm 1Mbps BLE 2Msps BLE Current in SYSTEM-OFF, no RAM retention SYSTEM-ON base current Additional RAM retention current per 4KB RAM block 7.5 mA 16.6 mA 5.4 mA 11.7 mA 5.8 mA 12.9 mA 0.3 uA 1.2 uA 20 nA TAIYO YUDEN CO., LTD. 10/29 30-May 2018 Ver.1.3 EYSHSNZWZ TAIYO YUDEN CO., LTD. Control No. HD-AE-A160195 (2/3) Control name Electrical characteristics RF Specifications Symbol Description Min. Fop Operating frequencies 2402 PLLchsp PLL channel spacing DfBLE2M Typ. Max. Units 2480 MHz 1 MHz Frequency deviation @ BLE 1Mbps +/-250 kHz DfBLE2M Frequency deviation @ BLE 2Msps +/-500 kHz PRF Maximum output power 4 PRFC RF power control range 24 PRFCR RF power accuracy PRF1 1st Adjacent Channel Transmit Power 1 MHz -25 dBc PRF2 2nd Adjacent Channel Transmit Power 2 MHz -50 dBc 0 dBm -94 dBm -91 dBm PRXMAX PSENS,IT,1M,BLE PSENS,IT,2M,BLE Maximum received signal strength at < 0.1% PER Receiver sensitivity 1Msps BLE Ideal transmitter