EMK316BJ225KL-T

有关敝司产品的注意事项 请务必在使用敝司产品之前阅读。 注意 ■ 本产品目录所记载的内容为2016年10月之内容。因改良等原因，可能会不经预告而变更记载内容，所以请务必在 使用前先确认最新的产品信息。未按照本产品目录所记载的内容或交货规格说明书使用敝司产品的，即便其致使使 用设备发生损害、瑕疵等时，敝司也不承担任何责任，敬请悉知。 ■ 就规格相关的详细内容，敝司备有交货规格说明书，详情请向敝司咨询。 ■ 使用敝司产品时，请务必事先安装到设备之后，在实际使用的环境下进行评估和确认。 ■ 本产品目录所中记载的产品可使用于一般电子设备［音像设备、办公自动化设备、家电产品、办公设备、信息 /通讯设 备（手机、电脑等）］。因此，若考虑将本产品目录所记载的产品使用于可能会直接危及生命或身体的设备［运输用设 备（汽车驱动控制设备、火车控制设备、船舶控制设备等）、交通信号设备、防灾设备、医疗用器械、高公共性信息通 信设备（电话交换机以及电话、无线、广播电视等基站）］等时，请务必事先向敝司咨询。 另外，请勿将敝司产品使用于对安全性和可靠性要求较高的设备（航天设备、航空设备、原子能控制设备、海底设 备、军事设备等）。 且即便属于一般电子设备，使用于对安全性和可靠性要求较高的设备、电路上时，敝司建议进行充分的安全评估， 并根据需要，在设计时追加保护电路等。 未经敝司的事先书面同意，把本产品目录中记载的产品使用于前述需要向敝司咨询的设备或敝司禁止使用的设备， 从而给客户或第三方造成的损害的，敝司不承担任何责任，敬请悉知。 ■ 因使用敝司产品，发生第三方的知识产权等权利相关问题的，敝司不承担责任。另外，并不代表授予这些权利的实 施权，敬请悉知。 ■ 除非书面合同中另有规定，敝司产品的保证范围仅限于交付的敝司产品单品，并且就敝司产品的故障或瑕疵所导致 的损害，敝司不承担任何责任，敬请悉知。 ■ 本产品目录所记载的内容适用于从敝司营业所、销售子公司、销售代理店（即“正规销售渠道”）购买的敝司产 品，并不适用于从上述以外的渠道购买的敝司产品，敬请悉知。 ■ 出口相关注意事项 本产品目录所记载的部分产品在出口时须事先确认《外汇和对外贸易法》以及美国出口管理的相关法规，并办理相 关手续。如有不明之处，请向敝司咨询。 17 多层陶瓷电容器 MULTILAYER CERAMIC CAPACITORS 波峰焊 WAVE 回流焊 REFLOW ■PARTS NUMBER 型号标示法 J M K ① ② ③ 3 1 6 ④ 陶瓷电容器 ①Rated voltage ①额定电压 Code 代码 P A J L E T G U H Q S ②Series name ②系列名称 Code 代码 M V W △ ⑤ B J 1 ⑥ 0 6 ⑦ ③End termination ③端接类型 Code 代码 K S Rated voltage［VDC］ 额定电压 ［ VDC］ 2.5 4 6.3 10 16 25 35 50 100 250 630 Dimensions Type 规格 ×W［mm］ L （L×W）［mm］ 021 042 063 Series name 系列名称 Multilayer ceramic capacitor for high frequency 高频用多层电容器 type multilayer capacitor 逆转型多层电容器 LW reverse A End端接类型 termination Plated 电镀 Cu Internal Electrodes Cu 内部电极 ④Dimension（L×W） ④外型尺寸 Multilayer ceramic capacitor 多层电容器 ⑤Dimension tolerance ⑤产品尺寸公差 Code Type 代码 规格 △ ALL 所有规格 063 105 107 空格 space △＝Blank M L － T △ ⑧ ⑨ ⑩ ⑪ ⑫ 0.25× 0.125 0.4 × 0.2 0.6 × 0.3 1.0 × 0.5 105 0.52× 1.0 ※ 1.6 × 0.8 107 0.8 × 1.6 ※ 2.0 × 1.25 212 1.25× 2.0 ※ 316 3.2 × 1.6 325 3.2 × 2.5 432 4.5 × 3.2 Note : ※LW reverse type（□WK） only 注: ※LW 逆转型 （□ WK ） L［mm］ Standard 标准 W［mm］ Standard 标准 0.6±0.05 1.0±0.10 1.6＋0.15/－0.05 0.3±0.05 0.5±0.10 0.8＋0.15/－0.05 212 2.0＋0.15/－0.05 1.25＋0.15/－0.05 316 3.2±0.20 1.6±0.20 325 063 105 3.2±0.30 0.6±0.09 1.0＋0.15/－0.05 2.5±0.30 0.3±0.09 0.5＋0.15/－0.05 107 1.6＋0.20/－0 0.8＋0.20/－0 212 2.0＋0.20/－0 1.25＋0.20/－0 316 105 008004 01005 0201 0402 0204 0603 0306 0805 0508 1206 1210 1812 T［mm］ Standard 标准 0.3±0.05 0.5±0.10 0.8＋0.15/－0.05 0.45±0.05 0.85±0.10 1.25＋0.15/－0.05 0.85±0.10 1.6±0.20 2.5±0.30 0.3±0.09 0.5＋0.15/－0.05 0.45±0.05 0.8＋0.20/－0 0.45±0.05 0.85±0.10 1.25＋0.20/－0 1.6±0.30 0.5＋0.20/－0 △= 空格 Blank space B C EIA（inch） 3.2±0.30 1.6±0.30 1.0＋0.20/－0 0.5＋0.20/－0 注： 标准产品尺寸 P.6P.6 Note: Standard external dimensions ⑥Temperature characteristics code ⑥温度特性 ■高介电常数【超低失真多层陶瓷电容器 ■High dielectric type（Excluding Super low 除外】 distortion multilayer ceramic capacitor） Applicable Temperature Code Ref. Temp.［℃］ Capacitance change 代码 适用标准 温度范围［℃］ 基准温度 ［℃］ 静电容量变化率 standard range［℃］ JIS B －25～＋ 85 20 ±10％ EIA X5R －55～＋ 85 25 ±15％ B7 EIA X7R －55～＋125 25 ±15％ C6 EIA X6S －55～＋105 25 ±22％ C7 EIA X7S －55～＋125 25 ±22％ LD(※) EIA X5R －55～＋ 85 25 ±15％ BJ Note : ※.LD Low distortion high value multilayer ceramic capacitor 注： ※LD 低失真大容量多层陶瓷电容器 Capacitance Tolerance 静电容量允许偏差 允许偏差代码 tolerance code ±10％ K ±20％ M ±10％ K ±20％ M ±10％ K ±20％ M ±10％ K ±20％ M ±10％ K ±20％ M ±10％ K M ±20％ △= 空格 Blank space c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 4 17 温度补偿用 ■Temperature compensating type Applicable 代码 Code 适用标准 standard CG UJ UK C0G JIS UJ EIA JIS EIA JIS U2J UK U2K SL Temperature range［℃］ Ref. Temp.［℃］ 基准温度 ［℃］ Capacitance change 静电容量变化率 －55～＋125 25 0±30ppm/℃ －55～＋125 －55～＋125 －55～＋125 －55～＋125 ⑥系列名称 ⑥Series code ・超低失真多层陶瓷电容器 ・Super low distortion multilayer ceramic capacitor Code 代码 SD Series code 系列名称 标准品 Standard ・中高耐压多层陶瓷电容器 ・Medium-High Voltage Multilayer Ceramic Capacitor 代码 系列名称 Code Series code SD 标准品 Standard ⑦静电容量 ⑦Nominal capacitance Code （example） 0R5 010 100 101 102 103 104 105 106 107 注： R＝小数点 Note : R＝Decimal point 代码（例） ⑧静电容量允许偏差 ⑧Capacitance tolerance 代码 Code A B C D F G J K M Z Nominal capacitance 静电容量 0.5pF 1pF 10pF 100pF 1,000pF 10,000pF 0.1μF 1.0μF 10μF 100μF 20 25 20 25 20 Tolerance code A B C D J C D J 允许偏差代码 －750±250ppm/℃ ±0.25pF C ＋350～－1000ppm/℃ ±5％ J －750±120ppm/℃ ⑨产品厚度 ⑨Thickness 代码 Code Thickness［mm］ 产品厚度 ［mm］ K H E C D P T K V W A D F G L N Y M 0.125 0.13 0.18 0.2 0.3 0.45（107 型以上） 0.45（107type or more） 0.5 0.8 0.85（212 型以上） 0.85（212type or more） 1.15 1.25 1.6 1.9 2.0 max 2.5 ⑩个别规格 ⑩Special code 代码 Code － 静电容量允许偏差 Capacitance tolerance ±0.05pF ±0.1pF ±0.25pF ±0.5pF ±1pF ±2％ ±5％ ±10％ ±20％ ＋80/－20％ Capacitance tolerance ±0.05pF ±0.1pF ±0.25pF ±0.5pF ±5％ ±0.25pF ±0.5pF ±5％ 静电容量允许偏差 陶瓷电容器 SL EIA 温度范围［℃］ 个别规格 Special code 标准 Standard ⑪包装 ⑪Packaging 代码 Code F T P R W Packaging 包装规格 φ178mm Taping 卷盘带装 （2mm pitch） φ178mm （2mm 间距） φ178mm （4mm 间距） φ178mm Taping 卷盘带装 （4mm pitch） φ178mm 178mm 卷盘带装 Taping （4mm 1000 个 pcs/reel） φ （4mmpitch, 间距, 1000 /卷盘） （厚度代码M）code M） 325 325 规格 type（Thickness φ178mm 178mm 卷盘带装 Taping （2mm only φ （2mmpitch）105type 间距） 规格（厚度代码 ） 105 （Thickness code E,H E,H） φ178mm Taping（1mm pitch）021/042type only φ178mm 压纹带（1mm 间距）021/042 规格专用 ⑫管理记号 ⑫Internal code 代码 Code △ 管理记号 Internal code 标准 Standard ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 c_mlcc_e-E05R01 5 ■STANDARD 标准产品尺寸EXTERNAL DIMENSIONS W Type( EIA ） ) （EIA Type L T e L Dimension [mm] 标准产品尺寸 [mm] W T 0.125±0.013 0.125±0.013 □MK021（008004） L 0.25±0.013 □MK042（01005） 0.4±0.02 0.2±0.02 0.2±0.02 □VS042（01005） 0.4±0.02 0.2±0.02 0.2±0.02 □MK063（0201） 0.6±0.03 0.3±0.03 陶瓷电容器 □MK105（0402） 1.0±0.05 0.5±0.05 □VK105（0402） □WK105（0204）※ 1.0±0.05 0.52±0.05 0.5±0.05 1.0±0.05 W T e ※ LW LW逆转型 reverse type □MK107（0603） 1.6±0.10 0.8±0.10 □WK107（0306）※ 0.8±0.10 1.6±0.10 □MK212（0805） 2.0±0.10 1.25±0.10 □WK212（0508）※ 1.25±0.15 2.0±0.15 □MK316（1206） 3.2±0.15 1.6±0.15 □MK325（1210） 3.2±0.30 2.5±0.20 □MK432（1812） 4.5±0.40 3.2±0.30 * 0.3±0.03 0.13±0.02 0.18±0.02 0.2±0.02 0.3±0.03 0.5±0.05 0.5±0.05 0.3±0.05 0.45±0.05 0.8±0.10 0.5±0.05 0.45±0.05 0.85±0.10 1.25±0.10 0.85±0.10 0.85±0.10 1.15±0.10 1.6±0.20 0.85±0.10 1.15±0.10 1.9±0.20 1.9＋0.1/－0.2 2.5±0.20 2.5±0.20 *1 K C D C P T H E C P V W P K A V K D G D D F L D F N Y M M e 0.0675±0.0275 0.1±0.03 0.1±0.03 0.15±0.05 0.25±0.10 0.25±0.10 0.18±0.08 0.35±0.25 0.25±0.15 0.5±0.25 0.3±0.2 0.5＋0.35/－0.25 0.6±0.3 0.9±0.6 注： ※:LW 1 产品厚度代码 Note ※.逆转型、 LW reverse type, *1.Thickness code 标准包装 ■STANDARD QUANTITY 规格 Type EIA（inch） Dimension 产品厚度 021 008004 ［mm］ 0.125 042 01005 0.2 063 0201 0.3 105 0402 0.13 0.18 0.2 0.3 0.5 0204 ※ 107 0603 0306 ※ 212 0805 0508 ※ 316 1206 325 1210 432 1812 注： ※LW 逆转型 （□ WKtype（□WK） ） Note : ※.LW Reverse 0.30 0.45 0.8 0.50 0.45 0.85 1.25 0.85 0.85 1.15 1.6 0.85 1.15 1.9 2.0 max 2.5 2.5 Code 代码 K C D P T H E C P V W P K A V K D G D D F L D F N Y M M 标准数量 ［pcs］ Standard quantity［pcs］ Paper tape Embossed 纸带 压纹带tape － 50000 － 40000 15000 － － － 20000 15000 20000 15000 － － 10000 － 4000 － － 4000 4000 － － 4000 4000 － － 3000 － － 3000 2000 － 2000 － － 1000 500 c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 6 17 型号一览 ■PARTS NUMBER ・ All the Multilayer Ceramic Capacitors of the catalog lineup are RoHS Compliant. ・本产品目录中记载的多层陶瓷电容器全部是RoHS对应品。 ・ Capacitance tolerance code is applied to [] of part number. ・请在型号的□中指定静电容量允许偏差代码。 Note) 注） We may provide X7R/X7S for some items according to the individual specification. 1 根据个别规格的约定，也会有采取温度特性为X7R/X7S的产品对应的情况。 **1 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact TAIYO YUDEN sales channels. 2 根据使用电路和机器，需要按照相应规格处理。请务必咨询正规销售渠道。 **2 The size standard should look at ④Dimension, ⑤Dimension tolerance, and ⑨Thickness, and P.6 Standard external dimensions. 3 关于尺寸规格，请参照型号标示法的④外形尺寸、⑤产品尺寸公差、⑨产品厚度、P.6标准产品尺寸。 **3 Multilayer Ceramic Capacitors (High dielectric type) 多层陶瓷电容器 ( 高介电常数） 021型 ●021TYPE 【Temperature Characteristic BJ : 【温度特性 BJ : X5R】 　厚度0.125mm（K） Part型号 number 2 2 EMK021 BJ221[]K-W EMK021 BJ471[]K-W EMK021 BJ102[]K-W JMK021 BJ222[]K-W JMK021 BJ472[]K-W JMK021 BJ103[]K-W AMK021 BJ223MK-W Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics X5R X5R X5R X5R X5R X5R X5R 16 6.3 4 　 HTLT 高温负载 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ 220 470 1000 2200 4700 0.01 0.022 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 10 10 10 10 10 10 10 150 150 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 0.01 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 0.01 1500 2200 3300 4700 6800 0.01 0.022 0.047 0.1 0.047 0.1 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 5 5 5 5 5 5 5 10 10 10 10 10 10 5 5 5 5 5 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 200 200 200 200 200 200 200 150 150 150 150 150 150 200 200 200 200 200 200 200 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 100 150 220 330 470 680 1000 100 150 220 330 470 680 1000 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 5 5 5 5 5 5 5 5 5 5 5 5 5 5 200 200 200 200 200 200 200 200 200 200 200 200 200 200 p p p p p μ μ *3 [mm] Thickness 厚度 *3 ［mm ］ 0.125±0.013 0.125±0.013 0.125±0.013 0.125±0.013 0.125±0.013 0.125±0.013 0.125±0.013 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R 陶瓷电容器 Part型号 number 1 1 X5R】　0.125mm thickness（K） 042型 ●042TYPE 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 　厚度 0.2mm（C） Part型号 number 1 1 B/X5R】　0.2mm thickness（C） Part型号 number 2 2 EMK042 BJ101[]C-W EMK042 BJ151[]C-W EMK042 BJ221[]C-W EMK042 BJ331[]C-W EMK042 BJ471[]C-W EMK042 BJ681[]C-W EMK042 BJ102[]C-W EMK042 BJ152[]C-W EMK042 BJ222[]C-W EMK042 BJ332[]C-W EMK042 BJ472[]C-W EMK042 BJ682[]C-W EMK042 BJ103[]C-W LMK042 BJ101[]C-W LMK042 BJ151[]C-W LMK042 BJ221[]C-W LMK042 BJ331[]C-W LMK042 BJ471[]C-W LMK042 BJ681[]C-W LMK042 BJ102[]C-W LMK042 BJ152[]C-W LMK042 BJ222[]C-W LMK042 BJ332[]C-W LMK042 BJ472[]C-W LMK042 BJ682[]C-W LMK042 BJ103[]C-W JMK042 BJ152[]C-W JMK042 BJ222[]C-W JMK042 BJ332[]C-W JMK042 BJ472[]C-W JMK042 BJ682[]C-W JMK042 BJ103[]C-W JMK042 BJ223[]C-W JMK042 BJ473[]C-W JMK042 BJ104[]C-W AMK042 BJ473[]C-W AMK042 BJ104[]C-W EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 LMK042 LMK042 LMK042 LMK042 LMK042 LMK042 LMK042 B7101[]C-W B7151[]C-W B7221[]C-W B7331[]C-W B7471[]C-W B7681[]C-W B7102[]C-W B7101[]C-W B7151[]C-W B7221[]C-W B7331[]C-W B7471[]C-W B7681[]C-W B7102[]C-W Temperature 温度特性 characteristics 16 B B B B B B B 10 B B B B B B B 6.3 B B B B B B 4 【Temperature Characteristic B7 【温度特性 B7 : X7R】 　厚度 0.2mm（C） Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R X5R X5R X5R X5R X5R X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R X5R X5R X5R X5R p p p p p p p p p p p p μ p p p p p p p p p p p p μ p p p p p μ μ μ μ μ μ HTLT 高温负载 *3 3 Thickness [mm] Rated voltage x ％ 厚度 * ［mm］ 额定电压 x％ 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R : X7R】　0.2mm thickness（C） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 16 10 Temperature 温度特性 characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R p p p p p p p p p p p p p p HTLT 高温负载 *3 Thickness [mm] 厚度 *3 ［mm ］ 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 7 ■PARTS NUMBER 型号一览 063型 ●063TYPE 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 　厚度 0.3mm（P） 1 1 Part型号 number B/X5R】　0.3mm thickness（P） 2 2 Part型号 number 陶瓷电容器 UMK063 BJ101[]P-F UMK063 BJ151[]P-F UMK063 BJ221[]P-F UMK063 BJ331[]P-F UMK063 BJ471[]P-F UMK063 BJ681[]P-F UMK063 BJ102[]P-F UMK063 BJ152[]P-F UMK063 BJ222[]P-F UMK063 BJ332[]P-F UMK063 BJ472[]P-F UMK063 BJ682[]P-F UMK063 BJ103[]P-F GMK063 BJ104[]P-F TMK063 BJ152[]P-F TMK063 BJ222[]P-F TMK063 BJ332[]P-F TMK063 BJ472[]P-F TMK063 BJ682[]P-F TMK063 BJ103[]P-F TMK063 BJ223[]P-F TMK063ABJ104[]P-F EMK063 BJ152[]P-F EMK063 BJ222[]P-F EMK063 BJ332[]P-F EMK063 BJ472[]P-F EMK063 BJ682[]P-F EMK063 BJ103[]P-F EMK063 BJ223[]P-F EMK063 BJ333[]P-F EMK063 BJ473[]P-F EMK063 BJ683[]P-F EMK063 BJ104[]P-F EMK063 BJ224[]P-F LMK063 BJ223[]P-F LMK063 BJ333[]P-F LMK063 BJ473[]P-F LMK063 BJ683[]P-F LMK063 BJ104[]P-F LMK063 BJ224[]P-F LMK063BBJ105MPLF JMK063 BJ223[]P-F JMK063 BJ333[]P-F JMK063 BJ473[]P-F JMK063 BJ683[]P-F JMK063 BJ104[]P-F JMK063 BJ224[]P-F JMK063 BJ334MP-F JMK063 BJ474[]P-F JMK063ABJ105[]P-F AMK063 BJ224[]P-F AMK063 BJ334MP-F AMK063 BJ474[]P-F AMK063ABJ105[]P-F 50 25 16 B7101[]P-F B7151[]P-F B7221[]P-F B7331[]P-F B7471[]P-F B7681[]P-F B7102[]P-F B B B B B B B B B B B B B B 10 B 6.3 4 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R 高温负载 HTLT 静电容量 Capacitance ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 0.01 0.1 1500 2200 3300 4700 6800 0.01 0.022 0.1 1500 2200 3300 4700 6800 0.01 0.022 0.033 0.047 0.068 0.1 0.22 0.022 0.033 0.047 0.068 0.1 0.22 1 0.022 0.033 0.047 0.068 0.1 0.22 0.33 0.47 1 0.22 0.33 0.47 1 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 5 5 5 5 5 5 10 5 5 5 5 5 5 7.5 10 5 5 5 5 5 5 7.5 7.5 7.5 10 10 10 7.5 7.5 7.5 10 10 10 10 7.5 7.5 7.5 10 10 10 10 10 10 10 10 10 10 200 200 200 200 200 200 200 200 200 200 200 200 200 150 200 200 200 200 200 200 150 150 200 200 200 200 200 200 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.1 0.1 0.033 0.047 0.068 0.1 0.22 0.022 0.033 0.047 0.068 0.1 0.22 1 0.47 1 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 10 10 7.5 7.5 10 10 10 7.5 7.5 7.5 10 10 10 10 10 10 150 150 150 150 150 150 150 200 150 150 150 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 100 150 220 330 470 680 1000 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 200 200 200 200 200 200 200 p p p p p p p p p p p p μ μ p p p p p μ μ μ p p p p p μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ 厚度 *3 ［*3 ］ mm Thickness [mm] 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.05 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.09 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.05 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.05 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R : X6S】　0.3mm thickness（P） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics 25 16 X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S 10 6.3 4 【Temperature Characteristic B7 【温度特性 B7 : X7R】 　厚度 0.3mm（P） UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 B B B B B B B B B B B B B B TMK063 C6104[]P-F EMK063AC6104[]P-F LMK063 C6333[]P-F LMK063 C6473[]P-F LMK063 C6683[]P-F LMK063 C6104[]P-F LMK063 C6224[]P-F JMK063 C6223[]P-F JMK063 C6333[]P-F JMK063 C6473[]P-F JMK063 C6683[]P-F JMK063 C6104[]P-F JMK063 C6224[]P-F JMK063BC6105MP-F AMK063 C6474[]P-F AMK063AC6105[]P-F Part型号 number 1 1 Temperature 温度特性 characteristics 35 【Temperature Characteristic C6 【温度特性 C6 : X6S】 　厚度 0.3mm（P） Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 *3 Thickness [mm] 厚度 *3 ［mm ］ 0.3±0.03 0.3±0.05 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.09 0.3±0.03 0.3±0.05 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R : X7R】　0.3mm thickness（P） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 50 Temperature 温度特性 characteristics X7R X7R X7R X7R X7R X7R X7R p p p p p p p HTLT 高温负载 *3 Thickness [mm] 厚度 *3 ［mm ］ 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 8 17 ■PARTS NUMBER 型号一览 Part型号 number 1 1 TMK063 TMK063 TMK063 TMK063 TMK063 TMK063 EMK063 EMK063 EMK063 EMK063 EMK063 EMK063 EMK063 2 2 Part型号 number B7152[]P-F B7222[]P-F B7332[]P-F B7472[]P-F B7682[]P-F B7103[]P-F B7152[]P-F B7222[]P-F B7332[]P-F B7472[]P-F B7682[]P-F B7103[]P-F B7223[]P-F Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 25 16 高温负载 HTLT 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 1500 2200 3300 4700 6800 0.01 1500 2200 3300 4700 6800 0.01 0.022 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 5 5 5 5 5 5 5 5 5 5 5 5 7.5 200 200 200 200 200 200 200 200 200 200 200 200 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 220 330 470 680 1000 1500 2200 3300 4700 6800 0.01 0.1 0.22 0.47 1 0.1 1 0.015 0.022 0.033 0.047 0.1 0.22 0.47 1 2.2 0.015 0.022 0.033 0.047 0.068 0.1 0.22 0.47 1 2.2 0.1 0.22 0.47 1 2.2 4.7 0.22 0.47 1 2.2 4.7 10 4.7 10 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±20 ±20 ±20 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.5 10 10 10 10 5 10 3.5 3.5 3.5 3.5 5 10 10 10 10 3.5 3.5 3.5 3.5 5 5 5 10 10 10 5 5 10 10 10 10 5 10 10 10 10 10 10 10 200 200 200 200 200 200 200 200 200 150 200 150 150 150 150 150 150 200 200 150 150 150 200 200 150 150 200 200 200 200 200 150 150 150 150 150 200 150 150 150 150 150 150 150 150 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.1 0.01 0.1 0.22 0.47 0.47 1 1 2.2 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 10 5 10 10 10 10 10 10 10 150 150 150 150 150 150 150 150 150 p p p p p μ p p p p p μ μ 厚度 *3 ［*3 ］ mm [mm] Thickness 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R 105型 ●105TYPE 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 　厚度 0.5mm（V） Part型号 number 1 1 UMK105 BJ221[]V-F UMK105 BJ331[]V-F UMK105 BJ471[]V-F UMK105 BJ681[]V-F UMK105 BJ102[]V-F UMK105 BJ152[]V-F UMK105 BJ222[]V-F UMK105 BJ332[]V-F UMK105 BJ472[]V-F UMK105 BJ682[]V-F UMK105 BJ103[]V-F UMK105 BJ104[]V-F UMK105 BJ224[]V-F UMK105ABJ474[]V-F UMK105CBJ105MV-F GMK105 BJ104[]V-F GMK105ABJ105[]V-F TMK105 BJ153[]V-F TMK105 BJ223[]V-F TMK105 BJ333[]V-F TMK105 BJ473[]V-F TMK105 BJ104[]V-F ＴMK105 BJ224[]V-F ＴMK105ABJ474[]V-F TMK105 BJ105[]V-F TMK105CBJ225[]V-F EMK105 BJ153[]V-F EMK105 BJ223[]V-F EMK105 BJ333[]V-F EMK105 BJ473[]V-F EMK105 BJ683[]V-F EMK105 BJ104[]V-F EMK105 BJ224[]V-F EMK105ABJ474[]V-F EMK105 BJ105[]V-F EMK105ABJ225[]V-F LMK105 BJ104[]V-F LMK105 BJ224[]V-F LMK105 BJ474[]V-F LMK105 BJ105[]V-F LMK105 BJ225[]V-F LMK105BBJ475MVLF JMK105 BJ224[]V-F JMK105 BJ474[]V-F JMK105 BJ105[]V-F JMK105 BJ225[]V-F JMK105BBJ475MV-F JMK105CBJ106MV-F AMK105ABJ475MV-F AMK105CBJ106MV-F Part型号 number 2 2 UMK105 BJ104[]P-F TMK105 BJ103[]P-F TMK105 BJ104[]P-F TMK105 BJ224[]P-F TMK105 BJ474[]P-F EMK105 BJ474[]P-F LMK105 BJ105[]PLF JMK105 BJ105[]P-F AMK105 BJ225MP-F Rated voltage 额定电压 ［[V] V］ 50 35 25 16 Temperature 温度特性 characteristics B B B B B B B B B B B B B B B B B B B B B B B B B B 10 B 6.3 JMK105 BJ475MV-FD AMK105 BJ475MV-F 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 　厚度 0.3mm（P） Part型号 number 1 1 B/X5R】　0.5mm thickness（V） 4 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R X5R X5R X5R X5R X5R X5R*1 X5R*1 X5R*1 X5R*1 X5R X5R X5R X5R X5R X5R*1 X5R*1 X5R*1 X5R*1 X5R X5R*1 X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R p p p p p p p p p p μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 *3 3 Thickness [mm] Rated voltage x ％ 厚度 * ［mm］ 额定电压 x％ 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.10 0.5+0.20/-0 0.5±0.05 0.5±0.10 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.10 0.5±0.05 0.5+0.20/-0 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.10 0.5±0.05 0.5±0.10 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5+0.15/-0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5+0.15/-0.05 0.5+0.20/-0 0.5±0.10 0.5+0.20/-0 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 陶瓷电容器 静电容量 Capacitance ［[F] F］ B/X5R】　0.3mm thickness（P） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics 50 B 25 16 10 6.3 4 X5R X5R X5R X5R X5R X5R X5R X5R X5R μ μ μ μ μ μ μ μ μ 高温负载 HTLT *3 Thickness [mm] 厚度 *3 ［mm ］ 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 9 ■PARTS NUMBER 型号一览 【Temperature Characteristic BJ 【温度特性 BJ : X5R】 　厚度 0.2mm（C） Part型号 number 1 1 LMK105 JMK105 JMK105 JMK105 : X5R】　0.2mm thickness（C） Part型号 number 2 2 BJ104[]C-F BJ224[]C-F BJ474[]C-F BJ105MC-F 10 Part型号 number 2 2 陶瓷电容器 X5R X5R X5R X5R 4 额定电压 Rated voltage ［[V] V］ tanδ [％] Rated voltage x％ 额定电压 x％ 0.1 0.22 0.47 1 ±10，±20 ±10，±20 ±10，±20 ±20 10 10 10 10 150 150 150 150 静电容量 Capacitance ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.1 0.22 0.47 1 ±10，±20 ±10，±20 ±10，±20 ±20 10 10 10 10 150 150 150 150 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ ±20 ±20 ±20 10 10 10 150 150 150 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 Rated voltage x％ x％ ±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±20 ±10，±20 ±20 ±20 ±20 10 10 10 10 10 10 10 10 10 10 150 150 150 150 200 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 220 330 470 680 1000 1500 2200 3300 4700 6800 0.01 0.022 0.047 0.1 1500 2200 3300 4700 6800 0.01 0.022 0.047 0.1 0.22 0.022 0.047 0.1 0.22 0.022 0.047 0.1 0.22 0.47 0.22 0.47 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.5 10 10 10 2.5 2.5 2.5 2.5 2.5 3.5 3.5 3.5 10 10 3.5 3.5 5 10 3.5 3.5 5 10 10 5 10 200 200 200 200 200 200 200 200 200 200 200 200 200 150 200 200 200 200 200 200 150 150 200 150 200 200 150 150 200 200 150 150 150 150 150 μ μ μ μ μ μ μ μ Temperature 温度特性 characteristics 静电容量 Capacitance ［[F] F］ X5R X5R X5R 0.1 μ 0.22 μ 0.47 μ Temperature 温度特性 characteristics 静电容量 Capacitance ［[F] F］ 10 6.3 4 厚度 *3 ［*3 ］ mm Thickness [mm] 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 0.18±0.02 0.18±0.02 0.18±0.02 0.18±0.02 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 0.13±0.02 0.13±0.02 0.13±0.02 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R : X6S】　0.5mm thickness（V） Part型号 number 2 2 GMK105CC6105MV-F TMK105AC6105[]V-F EMK105 C6105[]V-F EMK105CC6225MV-F LMK105 C6105[]V-F LMK105AC6225MV-F JMK105 C6105[]V-F JMK105 C6225MV-F JMK105BC6475MV-F AMK105BC6475MV-F 额定电压 Rated voltage ［[V] V］ 35 25 X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S 16 10 6.3 4 【Temperature Characteristic B7 【温度特性 B7 : X7R】 　厚度 0.5mm（V） 静电容量允许偏差 Capacitance tolerance [％] [％] : X5R】　0.13mm thickness（H） 2 2 Part型号 number 【Temperature Characteristic C6 【温度特性 C6 : X6S】 　厚度 0.5mm（V） UMK105 B7221[]V-F UMK105 B7331[]V-F UMK105 B7471[]V-F UMK105 B7681[]V-F UMK105 B7102[]V-F UMK105 B7152[]V-F UMK105 B7222[]V-F UMK105 B7332[]V-F UMK105 B7472[]V-F UMK105 B7682[]V-F UMK105 B7103[]V-F UMK105 B7223[]V-FR UMK105 B7473[]V-FR UMK105 B7104[]V-FR TMK105 B7152[]V-F TMK105 B7222[]V-F TMK105 B7332[]V-F TMK105 B7472[]V-F TMK105 B7682[]V-F TMK105 B7103[]V-F TMK105 B7223[]V-F TMK105 B7473[]V-F TMK105 B7104[]V-FR TMK105 B7224[]V-FR EMK105 B7223[]V-F EMK105 B7473[]V-F EMK105 B7104[]V-F EMK105 B7224[]V-FR LMK105 B7223[]V-F LMK105 B7473[]V-F LMK105 B7104[]V-F LMK105 B7224[]V-FR LMK105 B7474[]V-F JMK105 B7224[]V-F JMK105 B7474[]V-F Temperature 温度特性 characteristics 10 LMK105 BJ104MH-R JMK105 BJ224MH-R AMK105 BJ474MH-R Part型号 number 1 1 额定电压 Rated voltage ［[V] V］ 6.3 【Temperature Characteristic BJ 【温度特性 BJ : X5R】 　厚度 0.13mm（H） Part型号 number 1 1 X5R X5R X5R X5R 高温负载 HTLT 静电容量 Capacitance ［[F] F］ : X5R】　0.18mm thickness（E） LMK105 BJ104[]E-R JMK105 BJ224[]E-R JMK105 BJ474[]E-R AMK105 BJ105ME-R 1 Part型号 number 1 Temperature 温度特性 characteristics 6.3 【温度特性 BJ : X5R】 　厚度0.18mm（E） 【Temperature Characteristic BJ Part型号 number 1 1 额定电压 Rated voltage ［[V] V］ 1 1 1 2.2 1 2.2 1 2.2 4.7 4.7 μ μ μ μ μ μ μ μ μ μ 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 0.5+0.20/-0 0.5±0.10 0.5±0.05 0.5+0.20/-0 0.5±0.05 0.5±0.10 0.5±0.05 0.5±0.05 0.5+0.15/-0.05 0.5+0.15/-0.05 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R : X7R】　0.5mm thickness（V） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 50 25 16 10 6.3 Temperature 温度特性 characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R p p p p p p p p p p μ μ μ μ p p p p p μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 厚度 *3 ［*3 ］ mm [mm] Thickness 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 10 17 ■PARTS NUMBER 型号一览 107型 ●107TYPE 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 　厚度 0.8mm（A） Part型号 number 1 1 额定电压 Rated voltage ［[V] V］ UMK107 BJ474[]A-TD 50 35 TMK107 BJ225[]A-TD TMK107 BJ105[]K-T EMK107 BJ105[]K-T EMK107BBJ225[]K-T LMK107 BJ105[]K-T LMK107 BJ225[]K-T LMK107BBJ475MKLT JMK107 BJ105[]K-T JMK107 BJ225[]K-T JMK107 BJ475MK-T JMK107BBJ106MK-T*2 AMK107BBJ106MK-T*2 16 LMK107 BJ106[]ALTD B JMK107 BJ106[]A-T AMK107 BJ226MA-T Part型号 number 2 2 6.3 4 X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R*1 X5R*1 X5R*1 X5R X5R X5R X5R*1 X5R*1 X5R*1 X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R 高温负载 HTLT 静电容量 Capacitance ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.47 1 2.2 1 0.22 0.47 1 2.2 4.7 10 0.22 0.47 1 2.2 4.7 10 0.22 0.47 1 2.2 4.7 10 22 2.2 4.7 10 22 10 22 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±20 ±20 10 10 10 5 3.5 3.5 5 10 10 10 3.5 3.5 5 10 10 10 3.5 3.5 5 10 10 10 10 10 10 10 10 10 10 150 150 150 150 200 150 150 150 150 150 200 200 150 150 150 150 200 200 200 150 150 150 150 150 150 150 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±20 ±20 ±20 10 10 10 10 10 10 10 10 10 10 10 150 150 150 150 150 150 150 150 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±20 ±20 ±20 ±20 10 5 10 10 10 5 10 10 5 10 10 10 10 10 150 150 150 150 150 150 150 150 150 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.22 0.47 1 0.47 1 0.22 0.47 1 2.2 0.22 0.47 1 2.2 0.22 0.47 1 2.2 4.7 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 10 10 10 10 10 3.5 3.5 5 10 3.5 3.5 5 10 3.5 3.5 5 10 10 150 150 150 150 150 150 150 150 150 200 200 150 150 200 200 150 200 150 μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ 厚度 *3 ［*3 ］ mm Thickness [mm] 0.8+0.15/-0.05 0.8±0.10 0.8+0.20/-0 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8+0.15/-0.05 0.8+0.20/-0 0.8+0.20/-0 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8+0.15/-0.05 0.8+0.20/-0 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8+0.20/-0 0.8+0.20/-0 0.8±0.10 0.8±0.10 0.8+0.15/-0.05 0.8+0.20/-0 0.8±0.10 0.8+0.20/-0 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R/W R R R R R R/W R R R R R R/W R R R R R R R R R R R R thickness（K） Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics 25 16 B 10 LMK107 BJ475MKLTD B 6.3 4 X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R Capacitance 静电容量 ［[F] F］ 1 1 2.2 1 2.2 4.7 1 2.2 4.7 10 10 μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 *3 厚度 *3 ［mm ］ Thickness [mm] 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R : X6S】　0.8mm thickness（A） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics 25 X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S X6S 16 10 6.3 4 【Temperature Characteristic B7 【温度特性 B7 : X7R】 　厚度 0.8mm（A） UMK107 B7224[]A-TR UMK107 B7474[]A-TR UMK107AB7105[]A-T TMK107 B7474[]A-TR TMK107 B7105[]A-T EMK107 B7224[]A-T EMK107 B7474[]A-T EMK107 B7105[]A-T EMK107BB7225[]A-T LMK107 B7224[]A-T LMK107 B7474[]A-T LMK107 B7105[]A-T LMK107 B7225[]A-TR JMK107 B7224[]A-T JMK107 B7474[]A-T JMK107 B7105[]A-T JMK107 B7225[]A-TR JMK107BB7475[]A-T B B B B 10 TMK107BC6225[]A-T EMK107 C6105[]A-T EMK107BC6225[]A-T EMK107BC6475[]A-T EMK107BC6106MA-T LMK107 C6105[]A-T LMK107AC6475[]A-T LMK107BC6106MA-T JMK107 C6105[]A-T JMK107 C6475[]A-T JMK107BC6106MA-T JMK107BC6226MA-T AMK107AC6106MA-T AMK107BC6226MA-T Part型号 number 1 1 B B B B EMK107 BJ475[]A-TD 【Temperature Characteristic C6 【温度特性 C6 : X6S】 　厚度 0.8mm（A） Part型号 number 1 1 B B B B 25 【Temperature Characteristic : B/X5R】　0.45mm 【温度特性 BJ : B/X5R】 　厚度 0.45mmBJ （K） Part型号 number 1 1 Temperature 温度特性 characteristics 陶瓷电容器 UMK107ABJ474[]A-T UMK107 BJ105[]A-T UMK107BBJ225[]A-T GMK107 BJ105[]A-T TMK107 BJ224[]A-T TMK107 BJ474[]A-T TMK107 BJ105[]A-T TMK107ABJ225[]A-T TMK107BBJ475[]A-T TMK107BBJ106MA-T EMK107 BJ224[]A-T EMK107 BJ474[]A-T EMK107 BJ105[]A-T EMK107 BJ225[]A-T EMK107ABJ475[]A-T EMK107BBJ106MA-T LMK107 BJ224[]A-T LMK107 BJ474[]A-T LMK107 BJ105[]A-T LMK107 BJ225[]A-T LMK107 BJ475[]A-T LMK107BBJ106[]ALT LMK107BBJ226MA-T JMK107 BJ225[]A-T JMK107 BJ475[]A-T JMK107ABJ106[]A-T JMK107BBJ226MA-T AMK107 BJ106MA-T AMK107BBJ226MA-T B/X5R】　0.8mm thickness（A） Part型号 number 2 2 Capacitance 静电容量 ［[F] F］ 2.2 1 2.2 4.7 10 1 4.7 10 1 4.7 10 22 10 22 μ μ μ μ μ μ μ μ μ μ μ μ μ μ 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 0.8+0.20/-0 0.8±0.10 0.8+0.20/-0 0.8+0.20/-0 0.8+0.20/-0 0.8±0.10 0.8+0.15/-0.05 0.8+0.20/-0 0.8±0.10 0.8±0.10 0.8+0.20/-0 0.8+0.20/-0 0.8+0.15/-0.05 0.8+0.20/-0 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R : X7R】　0.8mm thickness（A） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 50 25 16 10 6.3 Temperature 温度特性 characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 *3 Thickness 厚度 *3 ［mm ］ [mm] 0.8±0.10 0.8±0.10 0.8+0.15/-0.05 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8+0.20/-0 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8+0.20/-0 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R/W R R R R/W R R R R/W R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 11 型号一览 ■PARTS NUMBER 212型 ●212TYPE 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 厚度 1.25mm（G） Part型号 number 1 1 陶瓷电容器 UMK212 BJ104[]G-T UMK212 BJ224[]G-T UMK212 BJ474[]G-T UMK212 BJ105[]G-T UMK212ABJ225[]G-T UMK212BBJ475[]G-T GMK212BBJ106[]G-T TMK212 BJ225[]G-T TMK212ABJ475[]G-T TMK212BBJ106MG-T TMK212BBJ226MG-TT EMK212 BJ225[]G-T EMK212ABJ475[]G-T EMK212ABJ106[]G-T EMK212BBJ226MG-T LMK212 BJ225[]G-T LMK212ABJ475[]G-T LMK212ABJ106[]G-T LMK212BBJ226MG-T JMK212ABJ475[]G-T JMK212ABJ106[]G-T JMK212ABJ226MG-T JMK212BBJ476MG-T PMK212BBJ107MG-T UMK212ABJ105[]D-T UMK212BBJ225[]D-T GMK212BBJ475[]D-T TMK212 BJ474[]D-T TMK212 BJ105[]D-T TMK212ABJ225[]D-T TMK212BBJ475[]D-T TMK212BBJ106[]D-T EMK212 BJ105[]D-T EMK212ABJ225[]D-T EMK212 BJ475[]D-T EMK212ABJ106[]D-T LMK212 BJ105[]D-T LMK212 BJ225[]D-T LMK212ABJ106[]D-T LMK212BBJ226MD-T JMK212ABJ106[]D-T JMK212ABJ226MD-T AMK212BBJ476MD-T TMK212BBJ225[]K-T EMK212BBJ475[]K-T LMK212ABJ475[]K-T JMK212ABJ475[]K-T JMK212ABJ106MK-T *2 EMK212 BJ475[]G-T EMK212 BJ106[]G-T LMK212 LMK212 LMK212 JMK212 JMK212 JMK212 JMK212 BJ475[]G-T BJ106[]G-T BJ226MG-T BJ475[]G-T BJ106[]G-T BJ226MG-T BJ476MG-T UMK212 BJ105[]D-TD 10 B B B B B 6.3 额定电压 Rated voltage ［[V] V］ Temperature 温度特性 characteristics 50 35 TMK212 BJ225[]D-T TMK212 BJ475[]D-TD EMK212 BJ225[]D-T 25 16 B B B B B B EMK212 BJ106[]D-TD LMK212 BJ106[]D-T JMK212 BJ106[]D-T JMK212 BJ226MD-T 10 6.3 4 Part型号 number 2 2 LMK212 BJ475[]K-T JMK212 BJ475[]K-T JMK212 BJ106MK-T tanδ [％] Rated voltage x％ 额定电压 x％ 0.1 0.22 0.47 1 2.2 4.7 10 2.2 4.7 10 22 2.2 4.7 10 22 2.2 4.7 10 22 4.7 10 22 47 100 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±20 ±20 ±20 3.5 3.5 3.5 5 10 10 10 5 10 10 10 5 5 10 10 5 5 10 10 5 10 10 10 10 200 200 150 150 150 150 150 150 150 150 150 200 150 150 150 200 200 200 150 200 200 150 150 150 静电容量 Capacitance ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 Rated voltage x％ x％ 1 2.2 4.7 0.47 1 2.2 4.7 10 1 2.2 4.7 10 1 2.2 10 22 10 22 47 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±20 ±20 10 10 10 3.5 5 5 10 10 5 5 10 10 3.5 5 10 10 10 10 10 150 150 150 200 200 150 150 150 200 150 150 150 200 200 150 150 200 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 10 10 10 10 10 150 150 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±20 ±20 ±20 ±20 10 10 10 10 150 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±20 10 10 150 150 μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ *3 厚度 *3 ［mm ］ Thickness [mm] 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25+0.15/-0.05 1.25+0.20/-0 1.25+0.20/-0 1.25±0.10 1.25+0.15/-0.05 1.25+0.20/-0 1.25+0.20/-0 1.25±0.10 1.25+0.15/-0.05 1.25+0.15/-0.05 1.25+0.20/-0 1.25±0.10 1.25+0.15/-0.05 1.25+0.15/-0.05 1.25+0.20/-0 1.25+0.15/-0.05 1.25+0.15/-0.05 1.25+0.15/-0.05 1.25+0.20/-0 1.25+0.20/-0 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R/W R/W R/W R/W R R R R R R R R R R R R R R R R R R R R B B X5R X5R X5R X5R X5R X5R X5R X5R X5R*1 X5R*1 X5R X5R X5R*1 X5R*1 X5R X5R X5R X5R X5R μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics 25 16 10 X5R X5R X5R X5R X5R 6.3 Capacitance 静电容量 ［[F] F］ 2.2 4.7 4.7 4.7 10 μ μ μ μ μ 高温负载 HTLT *3 Thickness [mm] 厚度 *3 ［mm ］ 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R : X6S】　1.25mm thickness（G） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics 10 6.3 X6S X6S X6S X6S 4 Capacitance 静电容量 ［[F] F］ 22 22 22 47 μ μ μ μ 高温负载 HTLT *3 Thickness [mm] 厚度 *3 ［mm ］ 1.25+0.20/-0 1.25+0.20/-0 1.25+0.15/-0.05 1.25+0.20/-0 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R : X6S】　0.85mm thickness（D） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 高温负载 HTLT Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X6S X6S 10 μ 22 μ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.1 0.22 0.47 1 2.2 1 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 10 10 3.5 200 150 150 150 150 150 10 4 【Temperature Characteristic B7 【温度特性 B7 : X7R】 厚度 1.25mm（G） Capacitance tolerance 静电容量允许偏差 [％] [％] : X5R】　0.45mm thickness（K） LMK212AC6106[]D-T AMK212BC6226MD-T UMK212 B7104[]G-T UMK212 B7224[]G-T UMK212 B7474[]G-T UMK212 B7105[]G-T UMK212BB7225[]G-T GMK212 B7105[]G-T 16 X5R*1 X5R*1 X5R*1 X5R X5R X5R X5R X5R X5R X5R X5R X5R*1 X5R*1 X5R X5R X5R*1 X5R*1 X5R X5R X5R X5R*1 X5R X5R X5R 高温负载 HTLT Capacitance 静电容量 ［[F] F］ B/X5R】　0.85mm thickness（D） Part型号 number 2 2 【Temperature Characteristic C6 【温度特性 C6 : X6S】 厚度 0.85mm（D） Part型号 number 1 1 25 2.5 LMK212BC6226MG-T JMK212BC6226MG-T AMK212AC6226MG-T AMK212BC6476MG-T Part型号 number 1 1 B B B B B B TMK212 BJ475[]G-T 【Temperature Characteristic C6 【温度特性 C6 : X6S】 厚度 1.25mm（G） Part型号 number 1 1 Temperature 温度特性 characteristics 35 【Temperature Characteristic BJ 【温度特性 BJ : X5R】 厚度 0.45mm（K） Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ 50 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 厚度 0.85mm（D） Part型号 number 1 1 B/X5R】　1.25mm thickness（G） Part型号 number 2 2 *3 [mm] Thickness 厚度 *3 ［mm ］ 0.85±0.10 0.85±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R : X7R】　1.25mm thickness（G） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 50 35 X7R X7R X7R X7R X7R X7R μ μ μ μ μ μ HTLT 高温负载 *3 Thickness [mm] 厚度 *3 ［mm ］ 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25+0.20/-0 1.25±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R/W R/W R/W R/W R R/W c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 12 17 型号一览 ■PARTS NUMBER Part型号 number 1 1 TMK212 B7105[]G-T TMK212 B7225[]G-TR TMK212AB7475[]G-T EMK212 B7105[]G-T EMK212 B7225[]G-T EMK212 B7475[]G-T EMK212BB7106MG-T LMK212 B7105[]G-T LMK212 B7225[]G-T LMK212 B7475[]G-T LMK212AB7106[]G-T JMK212AB7106[]G-T Part型号 number 2 2 X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R TMK212 B7475[]G-T 16 10 LMK212 B7106[]G-TD JMK212 B7106[]G-T 6.3 高温负载 HTLT Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 10 10 3.5 10 10 10 3.5 5 10 10 10 150 150 150 200 150 150 150 200 200 150 150 150 静电容量 Capacitance ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.1 0.22 0.47 1 2.2 0.47 1 2.2 4.7 1 2.2 4.7 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 10 10 10 10 10 3.5 5 5 10 3.5 5 10 150 150 150 150 150 200 200 150 150 200 200 150 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±20 ±20 ±20 ±20 ±20 3.5 10 10 10 3.5 5 5 10 3.5 5 5 10 5 10 10 5 10 10 10 10 10 10 200 150 150 150 200 150 150 150 200 200 150 150 200 150 150 200 200 200 150 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±20 ±20 3.5 3.5 10 3.5 3.5 5 10 3.5 5 10 10 5 10 10 10 10 10 150 150 150 200 150 150 150 200 200 150 150 200 200 150 200 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±20 ±20 ±20 ±20 10 10 10 10 150 150 200 150 Capacitance 静电容量 ［[F] F］ 1 2.2 4.7 1 2.2 4.7 10 1 2.2 4.7 10 10 μ μ μ μ μ μ μ μ μ μ μ μ *3 Thickness [mm] 厚度 *3 ［mm ］ 1.25±0.10 1.25±0.10 1.25+0.15/-0.05 1.25±0.10 1.25±0.10 1.25±0.10 1.25+0.20/-0 1.25±0.10 1.25±0.10 1.25±0.10 1.25+0.15/-0.05 1.25+0.15/-0.05 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R/W R R R R/W R R R R : X7R】　0.85mm thickness（D） Part型号 number 2 2 额定电压 Rated voltage ［[V] V］ Temperature 温度特性 characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 50 25 EMK212 B7225[]D-T LMK212 B7225[]D-T LMK212 B7475[]D-TR 16 10 μ μ μ μ μ μ μ μ μ μ μ μ 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R/W R R R R R R 陶瓷电容器 UMK212AB7104[]D-T UMK212AB7224[]D-T UMK212AB7474[]D-T UMK212AB7105[]D-T TMK212AB7225[]D-TR EMK212 B7474[]D-T EMK212 B7105[]D-T EMK212AB7225[]D-T EMK212BB7475[]D-T LMK212 B7105[]D-T LMK212AB7225[]D-T LMK212AB7475[]D-TR Temperature 温度特性 characteristics 25 【Temperature Characteristic B7 【温度特性 B7 : X7R】 厚度 0.85mm（D） Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ 316型 ●316TYPE 【Temperature Characteristic 【温度特性 BJ : B/X5R】 厚度 1.6mm（LBJ ） Part型号 number 1 1 UMK316 BJ105[]L-T UMK316 BJ225[]L-T UMK316 BJ475[]L-T UMK316BBJ106[]L-T TMK316 BJ225[]L-T TMK316 BJ475[]L-T TMK316 BJ106[]L-T TMK316BBJ226ML-T EMK316 BJ225[]L-T EMK316 BJ475[]L-T EMK316 BJ106[]L-T EMK316ABJ226[]L-T LMK316 BJ106[]L-T LMK316ABJ226[]L-T LMK316ABJ476ML-T JMK316 BJ106[]L-T JMK316ABJ226[]L-T JMK316ABJ476ML-T JMK316ABJ107ML-T AMK316ABJ107ML-T AMK316BBJ157ML-T PMK316BBJ227ML-T UMK316 BJ105[]D-T UMK316 BJ225[]D-T UMK316ABJ475[]D-T TMK316 BJ105[]D-T TMK316 BJ225[]D-T TMK316 BJ475[]D-T TMK316ABJ106[]D-T EMK316 BJ225[]D-T EMK316 BJ475[]D-T EMK316 BJ106[]D-T EMK316ABJ226MD-T LMK316 BJ475[]D-T LMK316 BJ106[]D-T LMK316ABJ226MD-T JMK316 BJ106[]D-T JMK316ABJ226MD-T JMK316ABJ476MD-T EMK316BC6226ML-T JMK316AC6476ML-T AMK316AC6476ML-T AMK316AC6107ML-T Temperature 温度特性 characteristics 50 25 16 EMK316 BJ226[]L-T LMK316 BJ226[]L-T LMK316 BJ476ML-T JMK316 BJ226[]L-T JMK316 BJ476ML-T JMK316 BJ107ML-T AMK316 BJ107ML-T 10 6.3 B B B B B B B B B B 4 2.5 X5R*1 X5R X5R X5R X5R*1 X5R X5R*1 X5R X5R*1 X5R X5R*1 X5R X5R*1 X5R X5R X5R*1 X5R X5R X5R X5R X5R X5R 静电容量 Capacitance ［[F] F］ 1 2.2 4.7 10 2.2 4.7 10 22 2.2 4.7 10 22 10 22 47 10 22 47 100 100 150 220 μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.30 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.30 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.30 1.6±0.30 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R/W R R R R R R R R R R R R R : B/X5R】　0.85mm thickness（D） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 50 Temperature 温度特性 characteristics B B UMK316 BJ475[]D-T 25 B B TMK316 BJ106[]D-TD 16 B B EMK316 BJ226MD-T 10 B B LMK316 BJ226MD-T B JMK316 BJ226MD-T JMK316 BJ476MD-T 【Temperature Characteristic 【温度特性 C6 : X6S】 厚度 1.6mm（L）C6 Part型号 number 1 1 额定电压 Rated voltage ［[V] V］ B 【Temperature Characteristic BJ 【温度特性 BJ : B/X5R】 厚度 0.85mm（D） Part型号 number 1 1 : B/X5R】　1.6mm thickness（L） Part型号 number 2 2 6.3 X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R Capacitance 静电容量 ［[F] F］ 1 2.2 4.7 1 2.2 4.7 10 2.2 4.7 10 22 4.7 10 22 10 22 47 μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 *3 Thickness [mm] 厚度 *3 ［mm ］ 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R : X6S】　1.6mm thickness（L） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 16 6.3 4 Temperature 温度特性 characteristics X6S X6S X6S X6S Capacitance 静电容量 ［[F] F］ 22 47 47 100 μ μ μ μ 高温负载 HTLT *3 Thickness [mm] 厚度 *3 ［mm ］ 1.6±0.30 1.6±0.20 1.6±0.20 1.6±0.20 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 13 型号一览 ■PARTS NUMBER 【Temperature Characteristic 【温度特性 C7 : X7S】 厚度 1.6mm（L）C7 Part型号 number 1 1 : X7S】　1.6mm thickness（L） Part型号 number 2 2 AMK316AC7476ML-T 陶瓷电容器 UMK316 B7224[]L-T UMK316 B7474[]L-T UMK316 B7105[]L-T UMK316 B7225[]L-T UMK316AB7475[]L-T GMK316AB7106[]L-TR TMK316 B7105[]L-T TMK316 B7225[]L-T TMK316AB7475[]L-T TMK316AB7106[]L-T EMK316 B7225[]L-T EMK316 B7475[]L-T EMK316AB7106[]L-T EMK316BB7226ML-T LMK316 B7225[]L-T LMK316 B7475[]L-T LMK316AB7106[]L-T LMK316AB7226[]L-TR JMK316 B7106[]L-T Capacitance 静电容量 ［[F] F］ X7S 47 μ Temperature 温度特性 characteristics 高温负载 HTLT Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±20 10 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.22 0.47 1 2.2 4.7 10 1 2.2 4.7 10 2.2 4.7 10 22 2.2 4.7 10 22 10 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 2.5 3.5 3.5 10 10 10 3.5 3.5 10 10 3.5 5 10 10 3.5 5 10 10 5 200 200 200 150 150 150 200 200 200 150 200 200 200 150 200 200 200 150 200 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 Rated voltage x％ x％ ±10，±20 ±10，±20 ±20 10 10 10 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±20 ±20 ±10，±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 5 5 10 3.5 5 10 5 10 10 5 10 10 10 10 10 10 10 10 10 10 150 150 150 150 150 150 150 150 150 200 150 150 150 150 150 150 150 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±20 ±20 ±10，±20 ±20 ±20 ±20 10 3.5 10 5 3.5 3.5 5 3.5 3.5 10 5 3.5 5 10 10 150 200 150 150 200 200 200 200 200 150 150 200 200 150 150 *3 Thickness [mm] 厚度 *3 ［mm ］ 1.6±0.20 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R : X7R】　1.6mm thickness（L） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 50 UMK316 B7475[]L-T 35 TMK316 B7475[]L-T TMK316 B7106[]L-TD EMK316 B7106[]L-TD LMK316 B7106[]L-TD LMK316 B7226[]Ｌ-TD 25 16 10 6.3 【Temperature B7 【温度特性 B7 : X7RCharacteristic 】厚度 0.85mm（D） Part型号 number 1 1 Temperature 温度特性 characteristics 4 【Temperature B7 【温度特性 B7 : X7RCharacteristic 】厚度 1.6mm（L） Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.30 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R/W R/W R R R R R/W R R R R/W R R R R/W R R R R : X7R】　0.85mm thickness（D） Part型号 number 2 2 UMK316 B7225[]D-T TMK316AB7475[]D-T LMK316AB7106MD-T 额定电压 Rated voltage ［[V] V］ Temperature 温度特性 characteristics 静电容量 Capacitance ［[F] F］ X7R X7R X7R 2.2 μ 4.7 μ 10 μ 50 25 10 HTLT 高温负载 厚度 *3 ［*3 ］ mm [mm] Thickness 0.85±0.10 0.85±0.10 0.85±0.10 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R 325型 ●325TYPE 【Temperature Characteristic BJ 【温度特性 BJ : B/X5R】 厚度 2.5mm（M） Part型号 number 1 1 UMK325 BJ475[]M-P UMK325 BJ106[]M-P GMK325 BJ226MM-P TMK325 BJ106[]M-P TMK325 BJ226[]M-P TMK325ABJ476MM-P EMK325 BJ226[]M-P EMK325 BJ476MM-P EMK325ABJ107MM-P LMK325 BJ226[]M-P LMK325 BJ476MM-P LMK325ABJ107MM-P JMK325 BJ476MM-P JMK325ABJ107MM-P JMK325ABJ157MM-P JMK325ABJ227MM-P JMK325ABJ337MM-P AMK325ABJ157MM-P AMK325ABJ227MM-P AMK325ABJ337MM-P : B/X5R】　2.5mm thickness（M） Part型号 number 2 2 UMK325 BJ475[]N-T GMK325 BJ225[]N-T GMK325 BJ475[]N-T GMK325 BJ106[]N-T TMK325 BJ335MN-T TMK325 BJ475[]N-T TMK325 BJ106[]N-T EMK325 BJ475[]N-T EMK325 BJ106[]N-T EMK325 BJ476MY-T LMK325 BJ226MY-T LMK325 BJ106[]N-T JMK325 BJ226MY-T JMK325 BJ107MY-T JMK325 BJ476MN-T Temperature 温度特性 characteristics 50 35 B 25 B 16 B 10 LMK325 BJ107MM-P JMK325 BJ107MM-P 6.3 4 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 厚度 1.9mm（Y,N） Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ X5R X5R X5R X5R*1 X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R X5R Capacitance 静电容量 ［[F] F］ 4.7 10 22 10 22 47 22 47 100 22 47 100 47 100 150 220 330 150 220 330 μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.30 2.5±0.20 2.5±0.20 2.5±0.30 2.5±0.20 2.5±0.20 2.5±0.30 2.5±0.20 2.5±0.30 2.5±0.30 2.5±0.30 2.5±0.30 2.5±0.30 2.5±0.30 2.5±0.30 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R B/X5R】　1.9mm thickness（Y,N） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics 50 B 35 25 16 10 6.3 B B B B B B B B B X5R X5R X5R X5R X5R*1 X5R*1 X5R X5R*1 X5R X5R X5R X5R X5R X5R X5R Capacitance 静电容量 ［[F] F］ 4.7 2.2 4.7 10 3.3 4.7 10 4.7 10 47 22 10 22 100 47 μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9+0.1/-0.2 1.9+0.1/-0.2 1.9±0.20 1.9+0.1/-0.2 1.9+0.1/-0.2 1.9±0.20 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 14 17 型号一览 ■PARTS NUMBER 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 厚度0.85mm（D） Part型号 number 1 1 B/X5R】　0.85mm thickness（D） Part型号 number 2 2 TMK325 BJ106[]D-T EMK325 BJ106[]D-T EMK325 BJ226MD-T LMK325 BJ335[]D-T LMK325 BJ475[]D-T LMK325 BJ106[]D-T 25 16 10 【Temperature Characteristic C6 【温度特性 C6 : X6S】 厚度 2.5mm（M） Part型号 number 1 1 Part型号 number 2 2 额定电压 Rated voltage ［[V] V］ 10 10 22 3.3 4.7 10 μ μ μ μ μ μ 高温负载 HTLT Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±20 ±10，±20 ±10，±20 ±10，±20 5 5 10 3.5 5 5 150 150 150 200 200 150 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±20 ±20 ±20 ±20 ±20 ±20 ±20 10 10 10 10 10 10 10 150 150 150 150 150 150 150 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ ±20 10 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 5 10 10 10 10 10 10 150 150 150 150 150 150 200 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 10 3.5 3.5 10 3.5 3.5 3.5 150 200 150 150 200 150 200 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±20 10 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±20 10 150 厚度 *3 ［*3mm ］ Thickness [mm] 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R 静电容量 Capacitance ［[F] F］ 47 100 100 150 220 330 330 μ μ μ μ μ μ μ HTLT 高温负载 厚度 *3 ［*3mm ］ Thickness [mm] 2.5±0.30 2.5±0.30 2.5±0.30 2.5±0.30 2.5±0.30 2.5±0.30 2.5±0.30 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R : X7S】　2.5mm thickness（M） Part型号 number 2 2 额定电压 Rated voltage ［[V] V］ Temperature 温度特性 characteristics 静电容量 Capacitance ［[F] F］ X7S 100 μ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ 6.3 高温负载 HTLT 厚度 *3 ［*3mm ］ Thickness [mm] 2.5±0.30 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R : X7R】　2.5mm thickness（M） Part型号 number 2 2 UMK325 B7475[]M-P UMK325AB7106[]M-P TMK325AB7106[]M-P TMK325 B7226[]M-PR EMK325 B7226[]M-PR LMK325 B7476[]M-PR JMK325 B7476[]M-PR Rated voltage 额定电压 ［[V] V］ X7R X7R X7R X7R X7R X7R X7R 50 25 16 10 6.3 【Temperature Characteristic B7 【温度特性 B7 : X7R】 厚度 1.9mm（N） Capacitance 静电容量 ［[F] F］ 陶瓷电容器 X6S X6S X6S X6S X6S X6S X6S 2.5 【Temperature Characteristic B7 【温度特性 B7 : X7R】 厚度 2.5mm（M） X5R X5R X5R X5R X5R X5R Temperature 温度特性 characteristics 4 JMK325AC7107MM-P Part型号 number 1 1 B B B B B B 16 10 6.3 【温度特性 C7 : X7S】 厚度 2.5mm（M） 【Temperature Characteristic C7 Part型号 number 1 1 Temperature 温度特性 characteristics : X6S】　2.5mm thickness（M） EMK325AC6476MM-P LMK325AC6107MM-P JMK325AC6107MM-P AMK325AC6157MM-P AMK325AC6227MM-P AMK325AC6337MM-P PMK325AC6337MM-P Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ 4.7 10 10 22 22 47 47 μ μ μ μ μ μ μ 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 2.5±0.20 2.5±0.30 2.5±0.30 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R : X7R】　1.9mm thickness（N） Part型号 number 2 2 UMK325 B7475[]N-TR TMK325 B7335[]N-T TMK325 B7475[]N-T TMK325 B7106[]N-TR EMK325 B7475[]N-T EMK325 B7106[]N-T LMK325 B7106[]N-T Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics 50 X7R X7R X7R X7R X7R X7R X7R 25 16 10 Capacitance 静电容量 ［[F] F］ 4.7 3.3 4.7 10 4.7 10 10 μ μ μ μ μ μ μ HTLT 高温负载 *3 Thickness [mm] 厚度 *3 ［mm ］ 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R 432型 ●432TYPE 【Temperature Characteristic 【温度特性 BJ : X5R】 厚度 2.5mm（M）BJ Part型号 number 1 1 : X5R】　2.5mm thickness（M） Part型号 number 2 2 AMK432 BJ477MM-T PMK432 C6477MM-T Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X5R 470 μ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X6S 470 μ 4 【Temperature Characteristic C6 【温度特性 C6 : X6S】 厚度 2.5mm（M） Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 2.5±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R : X6S】　2.5mm thickness（M） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 2.5 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 2.5±0.20 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 15 型号一览 ■PARTS NUMBER 多层陶瓷电容器（温度补偿用） Multilayer Ceramic Capacitors（Temperature compensating type） 021型 ●021TYPE 【Temperature Characteristic CG : CG/C0G】　0.125mm 【温度特性 CG : CG/C0G】 厚度 0.125mm （K） Part型号 number 1 1 陶瓷电容器 TMK021 CG0R2[]K-W TMK021 CG0R3[]K-W TMK021 CG0R4[]K-W TMK021 CG0R5[]K-W TMK021 CG0R6[]K-W TMK021 CG0R7[]K-W TMK021 CGR75[]K-W TMK021 CG0R8[]K-W TMK021 CG0R9[]K-W TMK021 CG010[]K-W TMK021 CG1R1[]K-W TMK021 CG1R2[]K-W TMK021 CG1R3[]K-W TMK021 CG1R4[]K-W TMK021 CG1R5[]K-W TMK021 CG1R6[]K-W TMK021 CG1R7[]K-W TMK021 CG1R8[]K-W TMK021 CG1R9[]K-W TMK021 CG020[]K-W TMK021 CG2R1[]K-W TMK021 CG2R2[]K-W TMK021 CG2R3[]K-W TMK021 CG2R4[]K-W TMK021 CG2R5[]K-W TMK021 CG2R6[]K-W TMK021 CG2R7[]K-W TMK021 CG2R8[]K-W TMK021 CG2R9[]K-W TMK021 CG030[]K-W TMK021 CG3R1[]K-W TMK021 CG3R2[]K-W TMK021 CG3R3[]K-W TMK021 CG3R4[]K-W TMK021 CG3R5[]K-W TMK021 CG3R6[]K-W TMK021 CG3R7[]K-W TMK021 CG3R8[]K-W TMK021 CG3R9[]K-W TMK021 CG040[]K-W TMK021 CG4R1[]K-W TMK021 CG4R2[]K-W TMK021 CG4R3[]K-W TMK021 CG4R4[]K-W TMK021 CG4R5[]K-W TMK021 CG4R6[]K-W TMK021 CG4R7[]K-W TMK021 CG4R8[]K-W TMK021 CG4R9[]K-W TMK021 CG050[]K-W TMK021 CG5R1[]K-W TMK021 CG5R2[]K-W TMK021 CG5R3[]K-W TMK021 CG5R4[]K-W TMK021 CG5R5[]K-W TMK021 CG5R6[]K-W TMK021 CG5R7[]K-W TMK021 CG5R8[]K-W TMK021 CG5R9[]K-W TMK021 CG060[]K-W TMK021 CG6R1[]K-W TMK021 CG6R2[]K-W TMK021 CG6R3[]K-W TMK021 CG6R4[]K-W TMK021 CG6R5[]K-W TMK021 CG6R6[]K-W TMK021 CG6R7[]K-W TMK021 CG6R8[]K-W TMK021 CG6R9[]K-W TMK021 CG070[]K-W TMK021 CG7R1[]K-W TMK021 CG7R2[]K-W TMK021 CG7R3[]K-W TMK021 CG7R4[]K-W TMK021 CG7R5[]K-W TMK021 CG7R6[]K-W TMK021 CG7R7[]K-W TMK021 CG7R8[]K-W TMK021 CG7R9[]K-W TMK021 CG080[]K-W TMK021 CG8R1[]K-W TMK021 CG8R2[]K-W TMK021 CG8R3[]K-W TMK021 CG8R4[]K-W TMK021 CG8R5[]K-W Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 25 thickness（K） Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 静电容量 ［[F] F］ 0.2 p 0.3 p 0.4 p 0.5 p 0.6 p 0.7 p 0.75 p 0.8 p 0.9 p 1p 1.1 p 1.2 p 1.3 p 1.4 p 1.5 p 1.6 p 1.7 p 1.8 p 1.9 p 2p 2.1 p 2.2 p 2.3 p 2.4 p 2.5 p 2.6 p 2.7 p 2.8 p 2.9 p 3p 3.1 p 3.2 p 3.3 p 3.4 p 3.5 p 3.6 p 3.7 p 3.8 p 3.9 p 4p 4.1 p 4.2 p 4.3 p 4.4 p 4.5 p 4.6 p 4.7 p 4.8 p 4.9 p 5p 5.1 p 5.2 p 5.3 p 5.4 p 5.5 p 5.6 p 5.7 p 5.8 p 5.9 p 6p 6.1 p 6.2 p 6.3 p 6.4 p 6.5 p 6.6 p 6.7 p 6.8 p 6.9 p 7p 7.1 p 7.2 p 7.3 p 7.4 p 7.5 p 7.6 p 7.7 p 7.8 p 7.9 p 8p 8.1 p 8.2 p 8.3 p 8.4 p 8.5 p 静电容量允许偏差 Capacitance tolerance ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF HTLT 高温负载 QQ值 *3 (at 1MHz) 1MHz) (at [mm] Thickness 厚度 *3 ［mm ］ Rated voltage x％ 额定电压 x％ (min) min 404 200 0.125±0.013 406 200 0.125±0.013 408 200 0.125±0.013 410 200 0.125±0.013 412 200 0.125±0.013 414 200 0.125±0.013 415 200 0.125±0.013 416 200 0.125±0.013 418 200 0.125±0.013 420 200 0.125±0.013 422 200 0.125±0.013 424 200 0.125±0.013 426 200 0.125±0.013 428 200 0.125±0.013 430 200 0.125±0.013 432 200 0.125±0.013 434 200 0.125±0.013 436 200 0.125±0.013 438 200 0.125±0.013 440 200 0.125±0.013 442 200 0.125±0.013 444 200 0.125±0.013 446 200 0.125±0.013 448 200 0.125±0.013 450 200 0.125±0.013 452 200 0.125±0.013 454 200 0.125±0.013 456 200 0.125±0.013 458 200 0.125±0.013 460 200 0.125±0.013 462 200 0.125±0.013 464 200 0.125±0.013 466 200 0.125±0.013 468 200 0.125±0.013 470 200 0.125±0.013 472 200 0.125±0.013 474 200 0.125±0.013 476 200 0.125±0.013 478 200 0.125±0.013 480 200 0.125±0.013 482 200 0.125±0.013 484 200 0.125±0.013 486 200 0.125±0.013 488 200 0.125±0.013 490 200 0.125±0.013 492 200 0.125±0.013 494 200 0.125±0.013 496 200 0.125±0.013 498 200 0.125±0.013 500 200 0.125±0.013 502 200 0.125±0.013 504 200 0.125±0.013 506 200 0.125±0.013 508 200 0.125±0.013 510 200 0.125±0.013 512 200 0.125±0.013 514 200 0.125±0.013 516 200 0.125±0.013 518 200 0.125±0.013 520 200 0.125±0.013 522 200 0.125±0.013 524 200 0.125±0.013 526 200 0.125±0.013 528 200 0.125±0.013 530 200 0.125±0.013 532 200 0.125±0.013 534 200 0.125±0.013 536 200 0.125±0.013 538 200 0.125±0.013 540 200 0.125±0.013 542 200 0.125±0.013 544 200 0.125±0.013 546 200 0.125±0.013 548 200 0.125±0.013 550 200 0.125±0.013 552 200 0.125±0.013 554 200 0.125±0.013 556 200 0.125±0.013 558 200 0.125±0.013 560 200 0.125±0.013 562 200 0.125±0.013 564 200 0.125±0.013 566 200 0.125±0.013 568 200 0.125±0.013 570 200 0.125±0.013 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 16 17 型号一览 ■PARTS NUMBER Part 型号 number 1 1 Part型号 number 2 2 25 16 Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG Capacitance 静电容量 ［[F] F］ C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 8.6 8.7 8.8 8.9 9 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10 12 15 18 22 27 33 39 47 56 p p p p p p p p p p p p p p p p p p p p p p p p Capacitance tolerance 静电容量允许偏差 ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.25pF, ±0.5pF ±0.5pF ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ 高温负载 HTLT QQ值 (at 1MHz) 1MHz) (at 厚度 *3 ［*3 ］ Thickness mm [mm] 额定电压 x％ Rated voltage x％ (min) min 572 200 0.125±0.013 574 200 0.125±0.013 576 200 0.125±0.013 578 200 0.125±0.013 580 200 0.125±0.013 582 200 0.125±0.013 584 200 0.125±0.013 586 200 0.125±0.013 588 200 0.125±0.013 590 200 0.125±0.013 592 200 0.125±0.013 594 200 0.125±0.013 596 200 0.125±0.013 598 200 0.125±0.013 600 200 0.125±0.013 640 200 0.125±0.013 700 200 0.125±0.013 760 200 0.125±0.013 840 200 0.125±0.013 940 200 0.125±0.013 1000 150 0.125±0.013 1000 150 0.125±0.013 1000 150 0.125±0.013 1000 150 0.125±0.013 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R 高温负载 HTLT QQ值 (at 1MHz) (at 1MHz) 厚度 *3 ［*3 ］ mm Thickness [mm] Rated voltage x％ 额定电压 x％ (min) min 408 200 0.2±0.02 410 200 0.2±0.02 412 200 0.2±0.02 414 200 0.2±0.02 415 200 0.2±0.02 416 200 0.2±0.02 418 200 0.2±0.02 420 200 0.2±0.02 422 200 0.2±0.02 424 200 0.2±0.02 426 200 0.2±0.02 428 200 0.2±0.02 430 200 0.2±0.02 432 200 0.2±0.02 434 200 0.2±0.02 436 200 0.2±0.02 438 200 0.2±0.02 440 200 0.2±0.02 442 200 0.2±0.02 444 200 0.2±0.02 446 200 0.2±0.02 448 200 0.2±0.02 450 200 0.2±0.02 452 200 0.2±0.02 454 200 0.2±0.02 456 200 0.2±0.02 458 200 0.2±0.02 460 200 0.2±0.02 462 200 0.2±0.02 464 200 0.2±0.02 466 200 0.2±0.02 468 200 0.2±0.02 470 200 0.2±0.02 472 200 0.2±0.02 474 200 0.2±0.02 476 200 0.2±0.02 478 200 0.2±0.02 480 200 0.2±0.02 482 200 0.2±0.02 484 200 0.2±0.02 486 200 0.2±0.02 488 200 0.2±0.02 490 200 0.2±0.02 492 200 0.2±0.02 494 200 0.2±0.02 496 200 0.2±0.02 498 200 0.2±0.02 500 200 0.2±0.02 502 200 0.2±0.02 504 200 0.2±0.02 506 200 0.2±0.02 508 200 0.2±0.02 510 200 0.2±0.02 512 200 0.2±0.02 514 200 0.2±0.02 516 200 0.2±0.02 518 200 0.2±0.02 520 200 0.2±0.02 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 陶瓷电容器 TMK021 CG8R6[]K-W TMK021 CG8R7[]K-W TMK021 CG8R8[]K-W TMK021 CG8R9[]K-W TMK021 CG090[]K-W TMK021 CG9R1[]K-W TMK021 CG9R2[]K-W TMK021 CG9R3[]K-W TMK021 CG9R4[]K-W TMK021 CG9R5[]K-W TMK021 CG9R6[]K-W TMK021 CG9R7[]K-W TMK021 CG9R8[]K-W TMK021 CG9R9[]K-W TMK021 CG100DK-W TMK021 CG120JK-W TMK021 CG150JK-W TMK021 CG180JK-W TMK021 CG220JK-W TMK021 CG270JK-W EMK021 CG330JK-W EMK021 CG390JK-W EMK021 CG470JK-W EMK021 CG560JK-W Rated voltage 额定电压 ［[V] V］ 042型 ●042TYPE 【Temperature Characteristic CG : CG/C0G】　0.2mm 【温度特性 CG : CG/C0G】 厚度 0.2mm（C,D） Part型号 number 1 1 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 CG0R4[]D-W CG0R5[]D-W CG0R6[]D-W CG0R7[]D-W CGR75[]D-W CG0R8[]D-W CG0R9[]D-W CG010[]D-W CG1R1[]D-W CG1R2[]D-W CG1R3[]D-W CG1R4[]D-W CG1R5[]D-W CG1R6[]D-W CG1R7[]D-W CG1R8[]D-W CG1R9[]D-W CG020[]D-W CG2R1[]D-W CG2R2[]D-W CG2R3[]D-W CG2R4[]D-W CG2R5[]D-W CG2R6[]D-W CG2R7[]D-W CG2R8[]D-W CG2R9[]D-W CG030[]D-W CG3R1[]D-W CG3R2[]D-W CG3R3[]D-W CG3R4[]D-W CG3R5[]D-W CG3R6[]D-W CG3R7[]D-W CG3R8[]D-W CG3R9[]D-W CG040[]D-W CG4R1[]D-W CG4R2[]D-W CG4R3[]D-W CG4R4[]D-W CG4R5[]D-W CG4R6[]D-W CG4R7[]D-W CG4R8[]D-W CG4R9[]D-W CG050[]D-W CG5R1[]D-W CG5R2[]D-W CG5R3[]D-W CG5R4[]D-W CG5R5[]D-W CG5R6[]D-W CG5R7[]D-W CG5R8[]D-W CG5R9[]D-W CG060[]D-W Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 25 thickness（C,D） Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 0.4 0.5 0.6 0.7 0.75 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 17 型号一览 ■PARTS NUMBER Part型号 number 1 1 陶瓷电容器 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 TMK042 Part 型号 number 2 2 CG6R1[]D-W CG6R2[]D-W CG6R3[]D-W CG6R4[]D-W CG6R5[]D-W CG6R6[]D-W CG6R7[]D-W CG6R8[]D-W CG6R9[]D-W CG070[]D-W CG7R1[]D-W CG7R2[]D-W CG7R3[]D-W CG7R4[]D-W CG7R5[]D-W CG7R6[]D-W CG7R7[]D-W CG7R8[]D-W CG7R9[]D-W CG080[]D-W CG8R1[]D-W CG8R2[]D-W CG8R3[]D-W CG8R4[]D-W CG8R5[]D-W CG8R6[]D-W CG8R7[]D-W CG8R8[]D-W CG8R9[]D-W CG090[]D-W CG9R1[]D-W CG9R2[]D-W CG9R3[]D-W CG9R4[]D-W CG9R5[]D-W CG9R6[]D-W CG9R7[]D-W CG9R8[]D-W CG9R9[]D-W CG100DD-W CG110JD-W CG120JD-W CG130JD-W CG150JD-W CG160JC-W CG180JC-W CG200JC-W CG220JC-W CG240JC-W CG270JC-W CG300JC-W CG330JC-W CG360JC-W CG390JC-W CG430JC-W CG470JC-W CG510JC-W CG560JC-W CG620JC-W CG680JC-W CG750JC-W CG820JC-W CG910JC-W CG101JC-W Rated voltage 额定电压 ［[V] V］ 25 【Temperature Characteristic CG : CG/C0G】　0.2mm 【温度特性 CG : CG/C0G】 厚度 0.2mm（C,D） Part型号 number 1 1 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 CG0R4[]D-W CG0R5[]D-W CG0R6[]D-W CG0R7[]D-W CGR75[]D-W CG0R8[]D-W CG0R9[]D-W CG010[]D-W CG1R1[]D-W CG1R2[]D-W CG1R3[]D-W CG1R4[]D-W CG1R5[]D-W CG1R6[]D-W CG1R7[]D-W CG1R8[]D-W CG1R9[]D-W CG020[]D-W CG2R1[]D-W CG2R2[]D-W CG2R3[]D-W Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 16 Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG 静电容量 Capacitance ［[F] F］ C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p Capacitance tolerance 静电容量允许偏差 ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.25pF, ±0.5pF ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF HTLT 高温负载 QQ值 (at 1MHz) 厚度 *3 ［*3 ］ (at 1MHz) mm Thickness [mm] 额定电压 x％ Rated voltage x％ (min) min 522 200 0.2±0.02 524 200 0.2±0.02 526 200 0.2±0.02 528 200 0.2±0.02 530 200 0.2±0.02 532 200 0.2±0.02 534 200 0.2±0.02 536 200 0.2±0.02 538 200 0.2±0.02 540 200 0.2±0.02 542 200 0.2±0.02 544 200 0.2±0.02 546 200 0.2±0.02 548 200 0.2±0.02 550 200 0.2±0.02 552 200 0.2±0.02 554 200 0.2±0.02 556 200 0.2±0.02 558 200 0.2±0.02 560 200 0.2±0.02 562 200 0.2±0.02 564 200 0.2±0.02 566 200 0.2±0.02 568 200 0.2±0.02 570 200 0.2±0.02 572 200 0.2±0.02 574 200 0.2±0.02 576 200 0.2±0.02 578 200 0.2±0.02 580 200 0.2±0.02 582 200 0.2±0.02 584 200 0.2±0.02 586 200 0.2±0.02 588 200 0.2±0.02 590 200 0.2±0.02 592 200 0.2±0.02 594 200 0.2±0.02 596 200 0.2±0.02 598 200 0.2±0.02 600 200 0.2±0.02 620 200 0.2±0.02 640 200 0.2±0.02 660 200 0.2±0.02 700 200 0.2±0.02 720 200 0.2±0.02 760 200 0.2±0.02 800 200 0.2±0.02 840 200 0.2±0.02 880 200 0.2±0.02 940 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R HTLT 高温负载 QQ值 *3 (at 1MHz) (at 1MHz) 厚度 *3 ［mm ］ Thickness [mm] 额定电压 x％ Rated voltage x％ (min) min 408 200 0.2±0.02 410 200 0.2±0.02 412 200 0.2±0.02 414 200 0.2±0.02 415 200 0.2±0.02 416 200 0.2±0.02 418 200 0.2±0.02 420 200 0.2±0.02 422 200 0.2±0.02 424 200 0.2±0.02 426 200 0.2±0.02 428 200 0.2±0.02 430 200 0.2±0.02 432 200 0.2±0.02 434 200 0.2±0.02 436 200 0.2±0.02 438 200 0.2±0.02 440 200 0.2±0.02 442 200 0.2±0.02 444 200 0.2±0.02 446 200 0.2±0.02 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R thickness（C,D） Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 静电容量 ［[F] F］ 0.4 0.5 0.6 0.7 0.75 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 p p p p p p p p p p p p p p p p p p p p p Capacitance tolerance 静电容量允许偏差 ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.05pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.1pF, ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 18 17 型号一览 ■PARTS NUMBER Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ 16 Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 静电容量 Capacitance ［[F] F］ 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10 11 12 13 15 16 18 20 22 24 27 30 33 36 p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p 静电容量允许偏差 Capacitance tolerance ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.5pF ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ 高温负载 HTLT 值 QQ (at 1MHz) 厚度 *3 ［*3 ］ (at 1MHz) mm Thickness [mm] 额定电压 x％ Rated voltage x％ (min) min 448 200 0.2±0.02 450 200 0.2±0.02 452 200 0.2±0.02 454 200 0.2±0.02 456 200 0.2±0.02 458 200 0.2±0.02 460 200 0.2±0.02 462 200 0.2±0.02 464 200 0.2±0.02 466 200 0.2±0.02 468 200 0.2±0.02 470 200 0.2±0.02 472 200 0.2±0.02 474 200 0.2±0.02 476 200 0.2±0.02 478 200 0.2±0.02 480 200 0.2±0.02 482 200 0.2±0.02 484 200 0.2±0.02 486 200 0.2±0.02 488 200 0.2±0.02 490 200 0.2±0.02 492 200 0.2±0.02 494 200 0.2±0.02 496 200 0.2±0.02 498 200 0.2±0.02 500 200 0.2±0.02 502 200 0.2±0.02 504 200 0.2±0.02 506 200 0.2±0.02 508 200 0.2±0.02 510 200 0.2±0.02 512 200 0.2±0.02 514 200 0.2±0.02 516 200 0.2±0.02 518 200 0.2±0.02 520 200 0.2±0.02 522 200 0.2±0.02 524 200 0.2±0.02 526 200 0.2±0.02 528 200 0.2±0.02 530 200 0.2±0.02 532 200 0.2±0.02 534 200 0.2±0.02 536 200 0.2±0.02 538 200 0.2±0.02 540 200 0.2±0.02 542 200 0.2±0.02 544 200 0.2±0.02 546 200 0.2±0.02 548 200 0.2±0.02 550 200 0.2±0.02 552 200 0.2±0.02 554 200 0.2±0.02 556 200 0.2±0.02 558 200 0.2±0.02 560 200 0.2±0.02 562 200 0.2±0.02 564 200 0.2±0.02 566 200 0.2±0.02 568 200 0.2±0.02 570 200 0.2±0.02 572 200 0.2±0.02 574 200 0.2±0.02 576 200 0.2±0.02 578 200 0.2±0.02 580 200 0.2±0.02 582 200 0.2±0.02 584 200 0.2±0.02 586 200 0.2±0.02 588 200 0.2±0.02 590 200 0.2±0.02 592 200 0.2±0.02 594 200 0.2±0.02 596 200 0.2±0.02 598 200 0.2±0.02 600 200 0.2±0.02 620 200 0.2±0.02 640 200 0.2±0.02 660 200 0.2±0.02 700 200 0.2±0.02 720 200 0.2±0.02 760 200 0.2±0.02 800 200 0.2±0.02 840 200 0.2±0.02 880 200 0.2±0.02 940 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 陶瓷电容器 EMK042 CG2R4[]D-W EMK042 CG2R5[]D-W EMK042 CG2R6[]D-W EMK042 CG2R7[]D-W EMK042 CG2R8[]D-W EMK042 CG2R9[]D-W EMK042 CG030[]D-W EMK042 CG3R1[]D-W EMK042 CG3R2[]D-W EMK042 CG3R3[]D-W EMK042 CG3R4[]D-W EMK042 CG3R5[]D-W EMK042 CG3R6[]D-W EMK042 CG3R7[]D-W EMK042 CG3R8[]D-W EMK042 CG3R9[]D-W EMK042 CG040[]D-W EMK042 CG4R1[]D-W EMK042 CG4R2[]D-W EMK042 CG4R3[]D-W EMK042 CG4R4[]D-W EMK042 CG4R5[]D-W EMK042 CG4R6[]D-W EMK042 CG4R7[]D-W EMK042 CG4R8[]D-W EMK042 CG4R9[]D-W EMK042 CG050[]D-W EMK042 CG5R1[]D-W EMK042 CG5R2[]D-W EMK042 CG5R3[]D-W EMK042 CG5R4[]D-W EMK042 CG5R5[]D-W EMK042 CG5R6[]D-W EMK042 CG5R7[]D-W EMK042 CG5R8[]D-W EMK042 CG5R9[]D-W EMK042 CG060[]D-W EMK042 CG6R1[]D-W EMK042 CG6R2[]D-W EMK042 CG6R3[]D-W EMK042 CG6R4[]D-W EMK042 CG6R5[]D-W EMK042 CG6R6[]D-W EMK042 CG6R7[]D-W EMK042 CG6R8[]D-W EMK042 CG6R9[]D-W EMK042 CG070[]D-W EMK042 CG7R1[]D-W EMK042 CG7R2[]D-W EMK042 CG7R3[]D-W EMK042 CG7R4[]D-W EMK042 CG7R5[]D-W EMK042 CG7R6[]D-W EMK042 CG7R7[]D-W EMK042 CG7R8[]D-W EMK042 CG7R9[]D-W EMK042 CG080[]D-W EMK042 CG8R1[]D-W EMK042 CG8R2[]D-W EMK042 CG8R3[]D-W EMK042 CG8R4[]D-W EMK042 CG8R5[]D-W EMK042 CG8R6[]D-W EMK042 CG8R7[]D-W EMK042 CG8R8[]D-W EMK042 CG8R9[]D-W EMK042 CG090[]D-W EMK042 CG9R1[]D-W EMK042 CG9R2[]D-W EMK042 CG9R3[]D-W EMK042 CG9R4[]D-W EMK042 CG9R5[]D-W EMK042 CG9R6[]D-W EMK042 CG9R7[]D-W EMK042 CG9R8[]D-W EMK042 CG9R9[]D-W EMK042 CG100DD-W EMK042 CG110JD-W EMK042 CG120JD-W EMK042 CG130JD-W EMK042 CG150JD-W EMK042 CG160JC-W EMK042 CG180JC-W EMK042 CG200JC-W EMK042 CG220JC-W EMK042 CG240JC-W EMK042 CG270JC-W EMK042 CG300JC-W EMK042 CG330JC-W EMK042 CG360JC-W Part 型号 number 2 2 c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 19 型号一览 ■PARTS NUMBER Part型号 number 1 1 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 EMK042 LMK042 Part 型号 number 2 2 CG390JC-W CG430JC-W CG470JC-W CG510JC-W CG560JC-W CG620JC-W CG680JC-W CG750JC-W CG820JC-W CG910JC-W CG101JC-W CG221JC-W Rated voltage 额定电压 ［[V] V］ 16 10 Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 静电容量 Capacitance ［[F] F］ 39 43 47 51 56 62 68 75 82 91 100 220 p p p p p p p p p p p p 静电容量允许偏差 Capacitance tolerance ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ 陶瓷电容器 高温负载 HTLT QQ值 厚度 *3 ［*3 ］ (at 1MHz) 1MHz) mm (at Thickness [mm] Rated voltage x％ 额定电压 x％ (min) min 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 1000 200 0.2±0.02 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R 高温负载 HTLT QQ值 *3 (at (at 1MHz) 1MHz) 厚度 *3 ［mm ］ Thickness [mm] Rated voltage x％ 额定电压 x％ (min) min 404 200 0.3±0.03 406 200 0.3±0.03 408 200 0.3±0.03 410 200 0.3±0.03 412 200 0.3±0.03 414 200 0.3±0.03 415 200 0.3±0.03 416 200 0.3±0.03 418 200 0.3±0.03 420 200 0.3±0.03 422 200 0.3±0.03 424 200 0.3±0.03 426 200 0.3±0.03 428 200 0.3±0.03 430 200 0.3±0.03 432 200 0.3±0.03 434 200 0.3±0.03 436 200 0.3±0.03 438 200 0.3±0.03 440 200 0.3±0.03 442 200 0.3±0.03 444 200 0.3±0.03 446 200 0.3±0.03 448 200 0.3±0.03 450 200 0.3±0.03 452 200 0.3±0.03 454 200 0.3±0.03 456 200 0.3±0.03 458 200 0.3±0.03 460 200 0.3±0.03 462 200 0.3±0.03 464 200 0.3±0.03 466 200 0.3±0.03 468 200 0.3±0.03 470 200 0.3±0.03 472 200 0.3±0.03 474 200 0.3±0.03 476 200 0.3±0.03 478 200 0.3±0.03 480 200 0.3±0.03 482 200 0.3±0.03 484 200 0.3±0.03 486 200 0.3±0.03 488 200 0.3±0.03 490 200 0.3±0.03 492 200 0.3±0.03 494 200 0.3±0.03 496 200 0.3±0.03 498 200 0.3±0.03 500 200 0.3±0.03 502 200 0.3±0.03 504 200 0.3±0.03 506 200 0.3±0.03 508 200 0.3±0.03 510 200 0.3±0.03 512 200 0.3±0.03 514 200 0.3±0.03 516 200 0.3±0.03 518 200 0.3±0.03 520 200 0.3±0.03 522 200 0.3±0.03 524 200 0.3±0.03 526 200 0.3±0.03 528 200 0.3±0.03 530 200 0.3±0.03 532 200 0.3±0.03 534 200 0.3±0.03 536 200 0.3±0.03 538 200 0.3±0.03 540 200 0.3±0.03 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 063型 ●063TYPE 【Temperature Characteristic CG : 【温度特性 CG : CG/C0G】 厚度 0.3mm（T） Part型号 number 1 1 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 UMK063 CG0R2[]T-F CG0R3[]T-F CG0R4[]T-F CG0R5[]T-F CG0R6[]T-F CG0R7[]T-F CGR75[]T-F CG0R8[]T-F CG0R9[]T-F CG010[]T-F CG1R1[]T-F CG1R2[]T-F CG1R3[]T-F CG1R4[]T-F CG1R5[]T-F CG1R6[]T-F CG1R7[]T-F CG1R8[]T-F CG1R9[]T-F CG020[]T-F CG2R1[]T-F CG2R2[]T-F CG2R3[]T-F CG2R4[]T-F CG2R5[]T-F CG2R6[]T-F CG2R7[]T-F CG2R8[]T-F CG2R9[]T-F CG030[]T-F CG3R1[]T-F CG3R2[]T-F CG3R3[]T-F CG3R4[]T-F CG3R5[]T-F CG3R6[]T-F CG3R7[]T-F CG3R8[]T-F CG3R9[]T-F CG040[]T-F CG4R1[]T-F CG4R2[]T-F CG4R3[]T-F CG4R4[]T-F CG4R5[]T-F CG4R6[]T-F CG4R7[]T-F CG4R8[]T-F CG4R9[]T-F CG050[]T-F CG5R1[]T-F CG5R2[]T-F CG5R3[]T-F CG5R4[]T-F CG5R5[]T-F CG5R6[]T-F CG5R7[]T-F CG5R8[]T-F CG5R9[]T-F CG060[]T-F CG6R1[]T-F CG6R2[]T-F CG6R3[]T-F CG6R4[]T-F CG6R5[]T-F CG6R6[]T-F CG6R7[]T-F CG6R8[]T-F CG6R9[]T-F CG070[]T-F CG/C0G】　0.3mm thickness（T） Part 型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 50 Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 静电容量 Capacitance ［[F] F］ Capacitance tolerance 静电容量允许偏差 0.2 0.3 0.4 0.5 0.6 0.7 0.75 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7 ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 20 17 型号一览 ■PARTS NUMBER Part型号 number 1 1 额定电压 Rated voltage ［[V] V］ 50 25 Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.5pF ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p 高温负载 HTLT QQ值 *3 (at 1MHz) 1MHz) (at [mm] Thickness 厚度 *3 ［mm ］ Rated voltage x％ 额定电压 x％ (min) min 542 200 0.3±0.03 544 200 0.3±0.03 546 200 0.3±0.03 548 200 0.3±0.03 550 200 0.3±0.03 552 200 0.3±0.03 554 200 0.3±0.03 556 200 0.3±0.03 558 200 0.3±0.03 560 200 0.3±0.03 562 200 0.3±0.03 564 200 0.3±0.03 566 200 0.3±0.03 568 200 0.3±0.03 570 200 0.3±0.03 572 200 0.3±0.03 574 200 0.3±0.03 576 200 0.3±0.03 578 200 0.3±0.03 580 200 0.3±0.03 582 200 0.3±0.03 584 200 0.3±0.03 586 200 0.3±0.03 588 200 0.3±0.03 590 200 0.3±0.03 592 200 0.3±0.03 594 200 0.3±0.03 596 200 0.3±0.03 598 200 0.3±0.03 600 200 0.3±0.03 620 200 0.3±0.03 640 200 0.3±0.03 660 200 0.3±0.03 700 200 0.3±0.03 720 200 0.3±0.03 760 200 0.3±0.03 800 200 0.3±0.03 840 200 0.3±0.03 880 200 0.3±0.03 940 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 1000 200 0.3±0.03 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 陶瓷电容器 UMK063 CG7R1[]T-F UMK063 CG7R2[]T-F UMK063 CG7R3[]T-F UMK063 CG7R4[]T-F UMK063 CG7R5[]T-F UMK063 CG7R6[]T-F UMK063 CG7R7[]T-F UMK063 CG7R8[]T-F UMK063 CG7R9[]T-F UMK063 CG080[]T-F UMK063 CG8R1[]T-F UMK063 CG8R2[]T-F UMK063 CG8R3[]T-F UMK063 CG8R4[]T-F UMK063 CG8R5[]T-F UMK063 CG8R6[]T-F UMK063 CG8R7[]T-F UMK063 CG8R8[]T-F UMK063 CG8R9[]T-F UMK063 CG090[]T-F UMK063 CG9R1[]T-F UMK063 CG9R2[]T-F UMK063 CG9R3[]T-F UMK063 CG9R4[]T-F UMK063 CG9R5[]T-F UMK063 CG9R6[]T-F UMK063 CG9R7[]T-F UMK063 CG9R8[]T-F UMK063 CG9R9[]T-F UMK063 CG100DT-F UMK063 CG110JT-F UMK063 CG120JT-F UMK063 CG130JT-F UMK063 CG150JT-F UMK063 CG160JT-F UMK063 CG180JT-F UMK063 CG200JT-F UMK063 CG220JT-F UMK063 CG240JT-F UMK063 CG270JT-F UMK063 CG300JT-F UMK063 CG330JT-F UMK063 CG360JT-F UMK063 CG390JT-F UMK063 CG430JT-F UMK063 CG470JT-F UMK063 CG510JT-F UMK063 CG560JT-F UMK063 CG620JT-F UMK063 CG680JT-F UMK063 CG750JT-F UMK063 CG820JT-F UMK063 CG910JT-F UMK063 CG101JT-F UMK063 CG111JT-F UMK063 CG121JT-F UMK063 CG131JT-F UMK063 CG151JT-F UMK063 CG181JT-F UMK063 CG201JT-F UMK063 CG221JT-F TMK063 CG241JT-F TMK063 CG271JT-F TMK063 CG301JT-F TMK063 CG331JT-F TMK063 CG361JT-F TMK063 CG391JT-F TMK063 CG431JT-F TMK063 CG471JT-F TMK063 CG511JT-F TMK063 CG561JT-F TMK063 CG621JT-F TMK063 CG681JT-F TMK063 CG751JT-F TMK063 CG821JT-F TMK063 CG911JT-F TMK063 CG102JT-F Part型号 number 2 2 c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 21 型号一览 ■PARTS NUMBER 105型 ●105TYPE 【Temperature Characteristic CG : 【温度特性 CG : CG/C0G】 厚度 0.5mm（V） Part型号 number 1 1 陶瓷电容器 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 CG/C0G】　0.5mm thickness（V） Part 型号 number 2 2 CG0R5CV-F CG010CV-F CG1R5CV-F CG020CV-F CG030CV-F CG040CV-F CG050CV-F CG060DV-F CG070DV-F CG080DV-F CG090DV-F CG100DV-F CG120JV-F CG150JV-F CG180JV-F CG220JV-F CG270JV-F CG330JV-F CG390JV-F CG470JV-F CG560JV-F CG680JV-F CG820JV-F CG101JV-F CG121JV-F CG151JV-F CG181JV-F CG221JV-F CG271JV-F CG331JV-F CG391JV-F CG471JV-F CG561JV-F CG681JV-F CG821JV-F CG102JV-F Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG 50 【Temperature Characteristic U△ : U△/U2△】　0.5mm 【温度特性 U△ : U△/U2△】 厚度 0.5mm （V） Part型号 number 1 1 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 Part 型号 number 2 2 UK0R5CV-F UK010CV-F UK1R5CV-F UK020CV-F UK030CV-F UJ040CV-F UJ050CV-F UJ060DV-F UJ070DV-F UJ080DV-F UJ090DV-F UJ100DV-F UJ120JV-F UJ150JV-F UJ180JV-F UJ220JV-F UJ270JV-F UJ330JV-F UJ390JV-F UJ470JV-F UJ560JV-F UJ680JV-F UJ820JV-F UJ101JV-F UJ121JV-F UJ151JV-F UJ181JV-F UJ221JV-F UJ271JV-F UJ331JV-F UMK105 UMK105 UMK105 UMK105 UMK105 UMK105 SL121JV-F SL151JV-F SL181JV-F SL221JV-F SL271JV-F SL331JV-F 静电容量允许偏差 Capacitance tolerance 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p 高温负载 HTLT QQ值 厚度 *3 ［*3 ］ (at 1MHz) mm (at 1MHz) Thickness [mm] 额定电压 x％ Rated voltage x％ (min) min 410 200 0.5±0.05 420 200 0.5±0.05 430 200 0.5±0.05 440 200 0.5±0.05 460 200 0.5±0.05 480 200 0.5±0.05 500 200 0.5±0.05 520 200 0.5±0.05 540 200 0.5±0.05 560 200 0.5±0.05 580 200 0.5±0.05 600 200 0.5±0.05 640 200 0.5±0.05 700 200 0.5±0.05 760 200 0.5±0.05 840 200 0.5±0.05 940 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 高温负载 HTLT QQ值 厚度 *3 ［*3 ］ (at 1MHz) mm (at 1MHz) Thickness [mm] 额定电压 x％ Rated voltage x％ (min) min 410 200 0.5±0.05 420 200 0.5±0.05 430 200 0.5±0.05 440 200 0.5±0.05 460 200 0.5±0.05 480 200 0.5±0.05 500 200 0.5±0.05 520 200 0.5±0.05 540 200 0.5±0.05 560 200 0.5±0.05 580 200 0.5±0.05 600 200 0.5±0.05 640 200 0.5±0.05 700 200 0.5±0.05 760 200 0.5±0.05 840 200 0.5±0.05 940 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R thickness（V） Temperature 温度特性 characteristics UK UK UK UK UK UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ 50 【Temperature 【温度特性 SL】厚度Characteristic 0.5mm（V） Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 静电容量 Capacitance ［[F] F］ U2K U2K U2K U2K U2K U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J U2J 静电容量 Capacitance ［[F] F］ 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p 静电容量允许偏差 Capacitance tolerance ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ SL】　0.5mm thickness（V） Part 型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 50 Temperature 温度特性 characteristics SL SL SL SL SL SL Capacitance 静电容量 ［[F] F］ 120 150 180 220 270 330 p p p p p p Capacitance tolerance 静电容量允许偏差 ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ 高温负载 Soldering HTLT 焊接方式 QQ值 *3 ：回流焊 (at 1MHz) R (at 1MHz) R:Reflow Thickness [mm] 厚度 *3 ［mm ］ Rated voltage x ％ 额定电压 ％ x ：波峰焊 W (min) min W:Wave 1000 200 0.5±0.05 R 1000 200 0.5±0.05 R 1000 200 0.5±0.05 R 1000 200 0.5±0.05 R 1000 200 0.5±0.05 R 1000 200 0.5±0.05 R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 22 17 型号一览 ■PARTS NUMBER 高频多层陶瓷电容器 Multilayer Ceramic Capacitors for High Frequency Applications (1GHz+) 042型 ●042TYPE 【Temperature Characteristic CG : 【温度特性 CG : CG/C0G】 厚度 0.2mm（C） Part型号 number 1 1 Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 25 Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 0.2 0.3 0.4 0.5 0.6 0.7 0.75 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8 8.1 8.2 8.3 8.4 8.5 ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.05pF, ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p p 高温负载 HTLT 值 QQ *3 (at 1GHz) (at 1GHz) Thickness [mm] 厚度 *3 ［mm ］ 额定电压 Rated voltage x％ x％ (min) (min) 300 200 0.2±0.02 300 200 0.2±0.02 300 200 0.2±0.02 300 200 0.2±0.02 300 200 0.2±0.02 300 200 0.2±0.02 300 200 0.2±0.02 300 200 0.2±0.02 300 200 0.2±0.02 300 200 0.2±0.02 280 200 0.2±0.02 270 200 0.2±0.02 260 200 0.2±0.02 250 200 0.2±0.02 240 200 0.2±0.02 230 200 0.2±0.02 220 200 0.2±0.02 210 200 0.2±0.02 200 200 0.2±0.02 190 200 0.2±0.02 185 200 0.2±0.02 180 200 0.2±0.02 175 200 0.2±0.02 170 200 0.2±0.02 160 200 0.2±0.02 155 200 0.2±0.02 150 200 0.2±0.02 140 200 0.2±0.02 135 200 0.2±0.02 130 200 0.2±0.02 125 200 0.2±0.02 125 200 0.2±0.02 120 200 0.2±0.02 120 200 0.2±0.02 110 200 0.2±0.02 110 200 0.2±0.02 110 200 0.2±0.02 100 200 0.2±0.02 100 200 0.2±0.02 90 200 0.2±0.02 90 200 0.2±0.02 85 200 0.2±0.02 85 200 0.2±0.02 85 200 0.2±0.02 85 200 0.2±0.02 85 200 0.2±0.02 85 200 0.2±0.02 80 200 0.2±0.02 80 200 0.2±0.02 80 200 0.2±0.02 75 200 0.2±0.02 75 200 0.2±0.02 75 200 0.2±0.02 70 200 0.2±0.02 70 200 0.2±0.02 70 200 0.2±0.02 70 200 0.2±0.02 70 200 0.2±0.02 65 200 0.2±0.02 65 200 0.2±0.02 65 200 0.2±0.02 65 200 0.2±0.02 65 200 0.2±0.02 65 200 0.2±0.02 65 200 0.2±0.02 60 200 0.2±0.02 60 200 0.2±0.02 60 200 0.2±0.02 60 200 0.2±0.02 60 200 0.2±0.02 60 200 0.2±0.02 60 200 0.2±0.02 55 200 0.2±0.02 55 200 0.2±0.02 55 200 0.2±0.02 55 200 0.2±0.02 55 200 0.2±0.02 55 200 0.2±0.02 55 200 0.2±0.02 55 200 0.2±0.02 55 200 0.2±0.02 50 200 0.2±0.02 50 200 0.2±0.02 50 200 0.2±0.02 50 200 0.2±0.02 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 陶瓷电容器 TVS042 CG0R2[]C-W TVS042 CG0R3[]C-W TVS042 CG0R4[]C-W TVS042 CG0R5[]C-W TVS042 CG0R6[]C-W TVS042 CG0R7[]C-W TVS042 CGR75[]C-W TVS042 CG0R8[]C-W TVS042 CG0R9[]C-W TVS042 CG010[]C-W TVS042 CG1R1[]C-W TVS042 CG1R2[]C-W TVS042 CG1R3[]C-W TVS042 CG1R4[]C-W TVS042 CG1R5[]C-W TVS042 CG1R6[]C-W TVS042 CG1R7[]C-W TVS042 CG1R8[]C-W TVS042 CG1R9[]C-W TVS042 CG020[]C-W TVS042 CG2R1[]C-W TVS042 CG2R2[]C-W TVS042 CG2R3[]C-W TVS042 CG2R4[]C-W TVS042 CG2R5[]C-W TVS042 CG2R6[]C-W TVS042 CG2R7[]C-W TVS042 CG2R8[]C-W TVS042 CG2R9[]C-W TVS042 CG030[]C-W TVS042 CG3R1[]C-W TVS042 CG3R2[]C-W TVS042 CG3R3[]C-W TVS042 CG3R4[]C-W TVS042 CG3R5[]C-W TVS042 CG3R6[]C-W TVS042 CG3R7[]C-W TVS042 CG3R8[]C-W TVS042 CG3R9[]C-W TVS042 CG040[]C-W TVS042 CG4R1[]C-W TVS042 CG4R2[]C-W TVS042 CG4R3[]C-W TVS042 CG4R4[]C-W TVS042 CG4R5[]C-W TVS042 CG4R6[]C-W TVS042 CG4R7[]C-W TVS042 CG4R8[]C-W TVS042 CG4R9[]C-W TVS042 CG050[]C-W TVS042 CG5R1[]C-W TVS042 CG5R2[]C-W TVS042 CG5R3[]C-W TVS042 CG5R4[]C-W TVS042 CG5R5[]C-W TVS042 CG5R6[]C-W TVS042 CG5R7[]C-W TVS042 CG5R8[]C-W TVS042 CG5R9[]C-W TVS042 CG060[]C-W TVS042 CG6R1[]C-W TVS042 CG6R2[]C-W TVS042 CG6R3[]C-W TVS042 CG6R4[]C-W TVS042 CG6R5[]C-W TVS042 CG6R6[]C-W TVS042 CG6R7[]C-W TVS042 CG6R8[]C-W TVS042 CG6R9[]C-W TVS042 CG070[]C-W TVS042 CG7R1[]C-W TVS042 CG7R2[]C-W TVS042 CG7R3[]C-W TVS042 CG7R4[]C-W TVS042 CG7R5[]C-W TVS042 CG7R6[]C-W TVS042 CG7R7[]C-W TVS042 CG7R8[]C-W TVS042 CG7R9[]C-W TVS042 CG080[]C-W TVS042 CG8R1[]C-W TVS042 CG8R2[]C-W TVS042 CG8R3[]C-W TVS042 CG8R4[]C-W TVS042 CG8R5[]C-W CG/C0G】　0.2mm thickness（C） c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 23 型号一览 ■PARTS NUMBER Part型号 number 1 1 陶瓷电容器 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 TVS042 Part型号 number 2 2 CG8R6[]C-W CG8R7[]C-W CG8R8[]C-W CG8R9[]C-W CG090[]C-W CG9R1[]C-W CG9R2[]C-W CG9R3[]C-W CG9R4[]C-W CG9R5[]C-W CG9R6[]C-W CG9R7[]C-W CG9R8[]C-W CG9R9[]C-W CG100[]C-W CG110JC-W CG120JC-W CG130JC-W CG150JC-W CG160JC-W CG180JC-W CG220JC-W Rated voltage 额定电压 ［[V] V］ 25 Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 静电容量 ［[F] F］ 8.6 8.7 8.8 8.9 9 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10 11 12 13 15 16 18 22 p p p p p p p p p p p p p p p p p p p p p p Capacitance tolerance 静电容量允许偏差 ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±0.1pF, ±0.25pF, ±0.5pF ±2%, ±5% ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ HTLT 高温负载 QQ值 (at (at 1GHz) 1GHz) 厚度 *3 ［*3 ］ Thickness mm [mm] Rated voltage x％ 额定电压 x％ (min) (min) 50 200 0.2±0.02 50 200 0.2±0.02 50 200 0.2±0.02 50 200 0.2±0.02 50 200 0.2±0.02 45 200 0.2±0.02 45 200 0.2±0.02 45 200 0.2±0.02 45 200 0.2±0.02 45 200 0.2±0.02 45 200 0.2±0.02 45 200 0.2±0.02 45 200 0.2±0.02 45 200 0.2±0.02 45 200 0.2±0.02 40 200 0.2±0.02 40 200 0.2±0.02 40 200 0.2±0.02 40 200 0.2±0.02 40 200 0.2±0.02 40 200 0.2±0.02 30 200 0.2±0.02 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R HTLT 高温负载 QQ值 (at 1GHz) (at 1GHz) 厚度 *3 ［*3 ］ mm [mm] Thickness Rated voltage x％ 额定电压 x％ (min) (min) 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 280 200 0.5±0.05 270 200 0.5±0.05 260 200 0.5±0.05 240 200 0.5±0.05 230 200 0.5±0.05 210 200 0.5±0.05 190 200 0.5±0.05 180 200 0.5±0.05 170 200 0.5±0.05 150 200 0.5±0.05 130 200 0.5±0.05 120 200 0.5±0.05 110 200 0.5±0.05 99 200 0.5±0.05 84 200 0.5±0.05 84 200 0.5±0.05 84 200 0.5±0.05 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R HTLT 高温负载 QQ值 *3 3 (at (at 1GHz) 1GHz) [mm] Thickness Rated voltage x ％ 厚度 * ［mm］ 额定电压 x％ (min) (min) 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 300 200 0.5±0.05 280 200 0.5±0.05 270 200 0.5±0.05 260 200 0.5±0.05 240 200 0.5±0.05 230 200 0.5±0.05 210 200 0.5±0.05 190 200 0.5±0.05 180 200 0.5±0.05 170 200 0.5±0.05 150 200 0.5±0.05 130 200 0.5±0.05 120 200 0.5±0.05 110 200 0.5±0.05 99 200 0.5±0.05 84 200 0.5±0.05 84 200 0.5±0.05 84 200 0.5±0.05 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R R R R R R R R R 105型 ●105TYPE 【Temperature Characteristic CG : CG/C0G】　0.5mm 【温度特性 CG : CG/C0G】 厚度 0.5mm（W） thickness（W） Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics Part型号 number 1 1 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 EVK105 Part型号 number 2 2 CG0R3BW-F CG0R4BW-F CG0R5BW-F CG0R6BW-F CG0R7BW-F CG0R8BW-F CG0R9BW-F CG010BW-F CG1R1BW-F CG1R2BW-F CG1R3BW-F CG1R5BW-F CG1R6BW-F CG1R8BW-F CG020BW-F CG2R2JW-F CG2R4JW-F CG2R7JW-F CG030JW-F CG3R3JW-F CG3R6JW-F CG3R9JW-F CG4R3JW-F CG4R7JW-F CG5R1JW-F 16 CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 【Temperature Characteristic CG : CG/C0G】　0.5mm 【温度特性 CG : CG/C0G】 厚度 0.5mm（W） thickness（W） Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics Part型号 number 1 1 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 UVK105 CG0R3BW-F CG0R4BW-F CG0R5BW-F CG0R6BW-F CG0R7BW-F CG0R8BW-F CG0R9BW-F CG010BW-F CG1R1BW-F CG1R2BW-F CG1R3BW-F CG1R5BW-F CG1R6BW-F CG1R8BW-F CG020BW-F CG2R2JW-F CG2R4JW-F CG2R7JW-F CG030JW-F CG3R3JW-F CG3R6JW-F CG3R9JW-F CG4R3JW-F CG4R7JW-F CG5R1JW-F Part型号 number 2 2 50 CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 静电容量 ［[F] F］ 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.5 1.6 1.8 2 2.2 2.4 2.7 3 3.3 3.6 3.9 4.3 4.7 5.1 p p p p p p p p p p p p p p p p p p p p p p p p p Capacitance 静电容量 ［[F] F］ 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.5 1.6 1.8 2 2.2 2.4 2.7 3 3.3 3.6 3.9 4.3 4.7 5.1 p p p p p p p p p p p p p p p p p p p p p p p p p Capacitance tolerance 静电容量允许偏差 ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ Capacitance tolerance 静电容量允许偏差 ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 24 17 型号一览 ■PARTS NUMBER 超低失真多层陶瓷电容器 Super Low Distortion Multilayer Ceramic Capacitors 105型 ●105TYPE thickness（V） Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 额定电压 Rated voltage x％ x％ Standard Type 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 200 200 200 200 200 200 200 200 200 200 200 200 200 200 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10 ±10 0.1 0.1 200 200 Part型号 number 1 1 Part型号 number 2 2 UMK105 SD391KV-F UMK105 SD471KV-F UMK105 SD561KV-F TMK105 SD681KV-F TMK105 SD821KV-F TMK105 SD102KV-F TMK105 SD122KV-F EMK105 SD152KV-F EMK105 SD182KV-F EMK105 SD222KV-F EMK105 SD272KV-F LMK105 SD332KV-F LMK105 SD392KV-F LMK105 SD472KV-F 50 25 16 10 【Temperature Characteristic : Standard】　0.3mm 【温度特性 SD : Standard】 厚度 0.3mmSD （P） thickness（P） Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics 10 6.3 Standard Type Part型号 number 1 1 Part型号 number 2 2 LMK105 SD152KP-F JMK105 SD272KP-F p p p p p p p p p p p p p p Capacitance 静电容量 ［[F] F］ 1500 p 2700 p 高温负载 HTLT HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 厚度 *3 ［*3 ］ mm [mm] Thickness 0.3±0.03 0.3±0.03 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R 陶瓷电容器 【Temperature Characteristic SD : Standard】　0.5mm 【温度特性 SD : Standard】 厚度 0.5mm （V） Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R 107型 ●107TYPE 【Temperature Characteristic SD : Standard】　0.8mm 【温度特性 SD : Standard】 厚度 0.8mm （A） thickness（A） Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ Standard Type 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 0.01 0.012 0.015 0.018 0.022 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 Part型号 number 1 1 Part型号 number 2 2 UMK107 SD102KA-T UMK107 SD122KA-T UMK107 SD152KA-T UMK107 SD182KA-T UMK107 SD222KA-T UMK107 SD272KA-T UMK107 SD332KA-T TMK107 SD392KA-T TMK107 SD472KA-T EMK107 SD562KA-T EMK107 SD682KA-T EMK107 SD822KA-T EMK107 SD103KA-T LMK107 SD123KA-T LMK107 SD153KA-T LMK107 SD183KA-T LMK107 SD223KA-T 50 25 16 10 p p p p p p p p p p p p μ μ μ μ μ 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R R 212型 ●212TYPE 【Temperature Characteristic SD : Standard】　1.25mm 【温度特性 SD : Standard】 厚度 1.25mm （G） Part型号 number 1 1 Part型号 number 2 2 GMK212 SD183KG-T GMK212 SD223KG-T GMK212 SD273KG-T LMK212 SD683KG-T LMK212 SD823KG-T LMK212 SD104KG-T Rated voltage 额定电压 ［[V] V］ Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ Standard Type 0.018 0.022 0.027 0.068 0.082 0.1 ±10 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 0.1 200 200 200 200 200 200 10 Part型号 number 2 2 UMK212 SD392KD-T UMK212 SD472KD-T UMK212 SD562KD-T UMK212 SD682KD-T UMK212 SD822KD-T UMK212 SD103KD-T GMK212 SD123KD-T GMK212 SD153KD-T EMK212 SD333KD-T LMK212 SD473KD-T Rated voltage 额定电压 ［[V] V］ HTLT 高温负载 Temperature 温度特性 characteristics 35 【Temperature Characteristic SD : Standard】　0.85mm 【温度特性 SD : Standard】 厚度 0.85mm （D） Part型号 number 1 1 thickness（G） μ μ μ μ μ μ 厚度 *3 ［*3 ］ mm Thickness [mm] 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R thickness（D） HTLT 高温负载 Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 额定电压 Rated voltage x％ x％ Standard Type 3900 4700 5600 6800 8200 0.01 0.012 0.015 0.033 0.047 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 200 200 200 200 200 200 200 200 200 200 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10 ±10 0.1 0.1 200 200 50 35 16 10 p p p p p μ μ μ μ μ 厚度 *3 ［*3 ］ mm Thickness [mm] 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R 316型 ●316TYPE 【Temperature Characteristic SD : Standard】　1.6mm 【温度特性 SD : Standard】 厚度 1.6mm （L） thickness（L） Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ 25 Standard Type 0.082 μ 0.1 μ Part型号 number 1 1 TMK316 SD823KL-T TMK316 SD104KL-T Part型号 number 2 2 高温负载 HTLT *3 [mm] Thickness 厚度 *3 ［mm ］ 1.6±0.20 1.6±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 25 型号一览 ■PARTS NUMBER 【Temperature Characteristic SD : Standard】　1.15mm 【温度特性 SD : Standard】 厚度 1.15mm （F） Part型号 number 1 1 Part型号 number 2 2 GMK316 SD333KF-T GMK316 SD393KF-T TMK316 SD473KF-T TMK316 SD563KF-T TMK316 SD683KF-T 额定电压 Rated voltage ［[V] V］ thickness（F） 陶瓷电容器 静电容量 Capacitance ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 Rated voltage x％ x％ Standard Type 0.033 0.039 0.047 0.056 0.068 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 200 200 200 200 200 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ ±10，±20 ±10，±20 ±10，±20 10 10 10 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ ±10，±20 ±10，±20 10 10 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±10，±20 10 10 10 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 10 200 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 5 10 150 200 35 25 低失真大容量多层陶瓷电容器 (CF_LD) Low Distortion High Value Multilayer 高温负载 HTLT Temperature 温度特性 characteristics μ μ μ μ μ 厚度 *3 ［*3 ］ mm Thickness [mm] 1.15±0.10 1.15±0.10 1.15±0.10 1.15±0.10 1.15±0.10 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R Ceramic Capacitors(CF_LD) 107型 ●107TYPE 【Temperature Characteristic 【温度特性 LD : X5R】 厚度 0.8mm（A）LD Part型号 number 1 1 : X5R】　0.8mm thickness（A） Part型号 number 2 2 UMK107BLD224[]A-T TMK107BLD474[]A-T TMK107BLD105[]A-T 额定电压 Rated voltage ［[V] V］ Temperature 温度特性 characteristics 静电容量 Capacitance ［[F] F］ X5R X5R X5R 0.22 μ 0.47 μ 1μ Temperature 温度特性 characteristics 静电容量 Capacitance ［[F] F］ X5R X5R 1μ 2.2 μ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X5R X5R X5R 1μ 4.7 μ 10 μ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X5R 1μ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X5R X5R 1.5 μ 4.7 μ 50 25 高温负载 HTLT Soldering 焊接方式 厚度 *3 ［*3 ］ mm [mm] Thickness R:Reflow ：回流焊 R ：波峰焊 WW:Wave 0.8+0.20/-0 0.8+0.20/-0 0.8+0.20/-0 R R R 212型 ●212TYPE 【Temperature Characteristic LD 【温度特性 LD : X5R】 厚度 1.25mm（G） Part型号 number 1 1 : X5R】　1.25mm thickness（G） Part型号 number 2 2 GMK212 LD105[]G-T GMK212BLD225[]G-T 额定电压 Rated voltage ［[V] V］ 35 HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 1.25±0.10 1.25+0.20/-0 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R 316型 ●316TYPE 【Temperature Characteristic 【温度特性 LD : X5R】 厚度 1.6mm（L）LD Part型号 number 1 1 : X5R】　1.6mm thickness（L） Part型号 number 2 2 UMK316 LD105[]L-T GMK316BLD475[]L-T TMK316BLD106[]L-T Rated voltage 额定电压 ［[V] V］ 50 35 25 高温负载 HTLT *3 厚度 *3 ［mm ］ [mm] Thickness 1.6±0.20 1.6±0.30 1.6±0.30 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R 325型 ●325TYPE 【Temperature Characteristic LD 【温度特性 LD : X5R】 厚度 1.9mm（N） Part型号 number 1 1 : X5R】　1.9mm thickness（N） Part型号 number 2 2 UMK325 LD105[]N-T 50 【Temperature Characteristic LD 【温度特性 LD : X5R】 厚度 2.5mm（M） Part型号 number 1 1 UMK325 LD155[]M-P UMK325 LD475[]M-P Rated voltage 额定电压 ［[V] V］ HTLT 高温负载 *3 Thickness [mm] 厚度 *3 ［mm ］ 1.9±0.20 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R : X5R】　2.5mm thickness（M） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 50 高温负载 HTLT *3 厚度 *3 ［mm ］ [mm] Thickness 2.5±0.20 2.5±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 26 17 型号一览 ■PARTS NUMBER 中高耐压多层陶瓷电容器 Medium-High Voltage Multilayer Ceramic Capacitors 105型 ●105TYPE 【Temperature Characteristic B7 【温度特性 B7 : X7R】 厚度 0.5mm（V） 1 1 Part型号 number 2 2 Part型号 number B7221[]V-F B7331[]V-F B7471[]V-F B7681[]V-F B7102[]V-F B7152[]V-F B7222[]V-F B7332[]V-F B7472[]V-F HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 Temperature 温度特性 characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R 100 【Temperature Characteristic CG : 【温度特性 CG : CG/C0G】 厚度 0.5mm（V） Part型号 number 1 1 额定电压 Rated voltage ［[V] V］ 高温负载 HTLT 静电容量 Capacitance ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 220 330 470 680 1000 1500 2200 3300 4700 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 200 200 200 200 200 200 200 200 200 p p p p p p p p p 厚度 *3 ［*3 ］ mm Thickness [mm] 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R CG/C0G】　0.5mm thickness（V） Part型号 number 2 2 CG080DV-F CG090DV-F CG100DV-F CG120JV-F CG150JV-F CG180JV-F CG220JV-F CG240JV-F CG270JV-F CG330JV-F CG390JV-F CG470JV-F CG560JV-F CG680JV-F CG820JV-F CG101JV-F 额定电压 Rated voltage ［[V] V］ 100 Temperature 温度特性 characteristics CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 静电容量 Capacitance ［[F] F］ 8 9 10 12 15 18 22 24 27 33 39 47 56 68 82 100 p p p p p p p p p p p p p p p p 静电容量允许偏差 Capacitance tolerance [％] ±0.5pF ±0.5pF ±0.5pF ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ ±5％ 高温负载 Q HTLT (at 1MHz) 厚度 *3 ［*3 ］ mm Thickness [mm] 额定电压 Rated voltage x％ x％ min 560 200 0.5±0.05 580 200 0.5±0.05 600 200 0.5±0.05 640 200 0.5±0.05 700 200 0.5±0.05 760 200 0.5±0.05 840 200 0.5±0.05 880 200 0.5±0.05 940 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 1000 200 0.5±0.05 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R R 陶瓷电容器 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 HMK105 : X7R】　0.5mm thickness（V） 107型 ●107TYPE 【Temperature Characteristic BJ 【温度特性 BJ : B/X5R】 厚度 0.8mm（A） Part型号 number 1 1 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 : B/X5R】　0.8mm thickness（A） Part型号 number 2 2 BJ102[]A-T BJ152[]A-T BJ222[]A-T BJ332[]A-T BJ472[]A-T BJ682[]A-T BJ103[]A-T BJ153[]A-T BJ223[]A-T BJ333[]A-T BJ473[]A-T BJ104[]A-T BJ224[]A-TE 100 【Temperature C7 【温度特性 C7 : X7SCharacteristic 】厚度 0.8mm（A） Part型号 number 1 1 Part型号 number 2 2 B7102[]A-T B7152[]A-T B7222[]A-T B7332[]A-T B7472[]A-T B7682[]A-T B7103[]A-T B7153[]A-T B7223[]A-T B7333[]A-T B7473[]A-T B7104[]A-T B B B B B B B B B B B B B 额定电压 Rated voltage ［[V] V］ X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 HTLT 高温负载 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 1000 1500 2200 3300 4700 6800 0.01 0.015 0.022 0.033 0.047 0.1 0.22 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 200 200 200 200 200 200 200 200 200 200 200 200 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 额定电压 Rated voltage x％ x％ ±10，±20 3.5 150 p p p p p p μ μ μ μ μ μ μ Temperature 温度特性 characteristics 静电容量 Capacitance ［[F] F］ X7S 0.22 μ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 1000 1500 2200 3300 4700 6800 0.01 0.015 0.022 0.033 0.047 0.1 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 100 【Temperature Characteristic B7 【温度特性 B7 : X7R】 厚度 0.8mm（A） HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 Temperature 温度特性 characteristics Soldering 焊接方式 *3 Thickness [mm] 厚度 *3 ［mm ］ ：回流焊 R R:Reflow ：波峰焊 WW:Wave 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 R R R R R R R R R R R R R : X7S 】　0.8mm thickness（A） HMK107 C7224[]A-TE Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 0.8±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R : X7R 】　0.8mm thickness（A） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 100 X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R p p p p p p μ μ μ μ μ μ 高温负载 HTLT *3 3 Thickness [mm] 额定电压 x％ Rated voltage x ％ 厚度 * ［mm］ 200 200 200 200 200 200 200 200 200 200 200 200 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 27 型号一览 ■PARTS NUMBER 【Temperature Characteristic SD : Standard 【温度特性 SD : Standard】 厚度 0.8mm （A） Part型号 number 1 1 陶瓷电容器 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 HMK107 Part型号 number 2 2 SD101KA-T SD121KA-T SD151KA-T SD181KA-T SD221KA-T SD271KA-T SD331KA-T SD391KA-T SD471KA-T SD561KA-T SD681KA-T SD821KA-T SD102KA-T 】　0.8mm thickness（A） Rated voltage 额定电压 ［[V] V］ 100 高温负载 HTLT Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 额定电压 Rated voltage x％ x％ Standard Type 100 120 150 180 220 270 330 390 470 560 680 820 1000 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 200 200 200 200 200 200 200 200 200 200 200 200 200 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.22 0.47 1 4700 6800 0.01 0.015 0.022 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 200 200 200 200 200 200 200 200 150 150 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 1000 1500 2200 3300 ±10，±20 ±10，±20 ±10，±20 ±10，±20 2.5 2.5 2.5 2.5 150 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 3.5 3.5 150 150 p p p p p p p p p p p p p *3 Thickness [mm] 厚度 *3 ［mm ］ 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 0.8±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R 212型 ●212TYPE 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 厚度 1.25mm（G） Part型号 number 1 1 B/X5R】　1.25mm thickness（G） Part型号 number 2 2 HMK212 BJ103[]G-T HMK212 BJ153[]G-T HMK212 BJ223[]G-T HMK212 BJ333[]G-T HMK212 BJ473[]G-T HMK212 BJ683[]G-T HMK212 BJ104[]G-T HMK212 BJ224[]G-T HMK212 BJ474[]G-TE HMK212BBJ105[]G-TE QMK212 BJ472[]G-T QMK212 BJ682[]G-T QMK212 BJ103[]G-T QMK212 BJ153[]G-T QMK212 BJ223[]G-T 100 250 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 厚度 0.85mm（D） Part型号 number 1 1 QMK212 QMK212 QMK212 QMK212 2 2 Part型号 number B7102[]D-T B7152[]D-T B7222[]D-T B7332[]D-T Temperature 温度特性 characteristics B B B B X5R*1 X5R*1 X5R*1 X5R*1 Rated voltage 额定电压 ［[V] V］ p p p p HTLT 高温负载 HTLT 高温负载 Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X7S X7S 0.47 μ 1μ Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.22 4700 6800 0.01 0.015 0.022 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 200 200 200 200 200 200 200 200 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ 1000 1500 2200 3300 ±10，±20 ±10，±20 ±10，±20 ±10，±20 2.5 2.5 2.5 2.5 150 150 150 150 X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 100 250 【Temperature Characteristic B7 【温度特性 B7 : X7R】 厚度 0.85mm（D） μ μ μ μ μ μ μ μ μ μ p p μ μ μ *3 Thickness [mm] 厚度 *3 ［mm ］ 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25+0.20/-0 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R *3 Thickness [mm] 厚度 *3 ［mm ］ 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R *3 厚度 *3 ［mm ］ Thickness [mm] 1.25±0.10 1.25+0.20/-0 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R : X7R】　1.25mm thickness（G） HMK212 B7103[]G-T HMK212 B7153[]G-T HMK212 B7223[]G-T HMK212 B7333[]G-T HMK212 B7473[]G-T HMK212 B7683[]G-T HMK212 B7104[]G-T HMK212 B7224[]G-T QMK212 B7472[]G-T QMK212 B7682[]G-T QMK212 B7103[]G-T QMK212 B7153[]G-T QMK212 B7223[]G-T QMK212 QMK212 QMK212 QMK212 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 100 100 【Temperature Characteristic B7 【温度特性 B7 : X7R】 厚度 1.25mm（G） 1 1 Part型号 number B B B B B B B B B B B B B B B HTLT 高温负载 : X7S】　1.25mm thickness（G） Part型号 number 2 2 HMK212 C7474[]G-TE HMK212BC7105[]G-TE 1 1 Part型号 number Rated voltage 额定电压 ［[V] V］ 250 【Temperature Characteristic C7 【温度特性 C7 : X7S】 厚度 1.25mm（G） Temperature 温度特性 characteristics B/X5R】　0.85mm thickness（D） Part型号 number 2 2 BJ102[]D-T BJ152[]D-T BJ222[]D-T BJ332[]D-T Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ μ μ μ μ μ μ μ μ p p μ μ μ HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 1.25±0.10 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R : X7R】　0.85mm thickness（D） 2 2 Part型号 number Rated voltage 额定电压 ［[V] V］ 250 Temperature 温度特性 characteristics X7R X7R X7R X7R p p p p HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 28 17 型号一览 ■PARTS NUMBER 【Temperature Characteristic SD（D） : Standard 【温度特性 SD : Standard】 厚度 0.85mm Part型号 number 1 1 Part型号 number 2 2 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ Standard Type 2200 4700 100 120 150 180 220 330 390 470 560 680 820 1000 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 200 200 150 150 150 150 150 150 150 150 150 150 150 150 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ ±10 0.1 200 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ 0.047 0.068 0.1 0.15 0.22 0.33 0.47 1 2.2 0.033 0.047 0.068 0.1 0.015 0.022 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 200 200 200 200 200 200 200 200 150 150 150 150 150 120 120 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 1000 1500 2200 3300 4700 6800 0.01 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 2.5 2.5 2.5 2.5 2.5 2.5 2.5 120 120 120 120 120 120 120 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ ±10，±20 3.5 150 100 250 【Temperature Characteristic SD : Standard 【温度特性 SD : Standard】 厚度 1.25mm （G） 2 2 Part型号 number HMK212 SD392KG-T 高温负载 HTLT Temperature 温度特性 characteristics p p p p p p p p p p p p p p *3 Thickness [mm] 厚度 *3 ［mm ］ 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R 】　1.25mm thickness（G） Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics 100 Standard Type Capacitance 静电容量 ［[F] F］ 3900 p 高温负载 HTLT 厚度 *3 ［*3 ］ mm [mm] Thickness 1.25±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R 陶瓷电容器 HMK212 SD222KD-T HMK212 SD472KD-T QMK212 SD101KD-T QMK212 SD121KD-T QMK212 SD151KD-T QMK212 SD181KD-T QMK212 SD221KD-T QMK212 SD331KD-T QMK212 SD391KD-T QMK212 SD471KD-T QMK212 SD561KD-T QMK212 SD681KD-T QMK212 SD821KD-T QMK212 SD102KD-T 1 1 Part型号 number 】　0.85mm thickness（D） Rated voltage 额定电压 ［[V] V］ 316型 ●316TYPE 【Temperature Characteristic BJ 【温度特性 BJ : B/X5R】 厚度 1.6mm（L） 1 1 Part型号 number : B/X5R】　1.6mm thickness（L） 2 2 Part型号 number HMK316 BJ473[]L-T HMK316 BJ683[]L-T HMK316 BJ104[]L-T HMK316 BJ154[]L-T HMK316 BJ224[]L-T HMK316 BJ334[]L-T HMK316 BJ474[]L-T HMK316 BJ105[]L-T HMK316ABJ225[]L-TE QMK316 BJ333[]L-T QMK316 BJ473[]L-T QMK316 BJ683[]L-T QMK316 BJ104[]L-T SMK316 BJ153[]L-T SMK316 BJ223[]L-T 100 250 630 【Temperature Characteristic BJ : 【温度特性 BJ : B/X5R】 厚度 1.15mm（F） Part型号 number 1 1 SMK316 SMK316 SMK316 SMK316 SMK316 SMK316 SMK316 Part型号 number 2 2 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 Temperature 温度特性 characteristics B B B B B B B Rated voltage 额定电压 ［[V] V］ μ μ μ μ μ μ μ μ μ μ μ μ μ μ μ X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 p p p p p p μ 高温负载 HTLT HTLT 高温负载 Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X7S 2.2 μ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ 0.047 0.068 0.1 0.15 0.22 0.33 0.47 1 0.033 0.047 0.068 0.1 0.015 0.022 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 200 200 200 200 200 200 200 200 150 150 150 150 120 120 100 【Temperature Characteristic 【温度特性 B7 : X7R】 厚度 1.6mm（L）B7 HMK316 B7473[]L-T HMK316 B7683[]L-T HMK316 B7104[]L-T HMK316 B7154[]L-T HMK316 B7224[]L-T HMK316 B7334[]L-T HMK316 B7474[]L-T HMK316 B7105[]L-T QMK316 B7333[]L-T QMK316 B7473[]L-T QMK316 B7683[]L-T QMK316 B7104[]L-T SMK316 B7153[]L-T SMK316 B7223[]L-T B B B B B B B B B B B B B B B 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R R R *3 厚度 *3 ［mm ］ [mm] Thickness 1.15±0.10 1.15±0.10 1.15±0.10 1.15±0.10 1.15±0.10 1.15±0.10 1.15±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R : X7S】　1.6mm thickness（L） 2 2 Part型号 number HMK316AC7225[]L-TE Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ 630 【Temperature Characteristic 【温度特性 C7 : X7S】 厚度 1.6mm（L）C7 Temperature 温度特性 characteristics B/X5R】　1.15mm thickness（F） BJ102[]F-T BJ152[]F-T BJ222[]F-T BJ332[]F-T BJ472[]F-T BJ682[]F-T BJ103[]F-T 1 1 Part型号 number Rated voltage 额定电压 ［[V] V］ 厚度 *3 ［*3 ］ mm Thickness [mm] 1.6±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R : X7R】　1.6mm thickness（L） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 100 250 630 X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R μ μ μ μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 *3 Thickness [mm] 厚度 *3 ［mm ］ 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 1.6±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 29 型号一览 ■PARTS NUMBER 【Temperature Characteristic B7 【温度特性 B7 : X7R】 厚度 1.15mm（F） Part型号 number 1 1 SMK316 SMK316 SMK316 SMK316 SMK316 SMK316 SMK316 : X7R】　1.15mm thickness（F） Part型号 number 2 2 额定电压 Rated voltage ［[V] V］ B7102[]F-T B7152[]F-T B7222[]F-T B7332[]F-T B7472[]F-T B7682[]F-T B7103[]F-T X7R X7R X7R X7R X7R X7R X7R 630 【Temperature Characteristic : Standard 【温度特性 SD : Standard】 厚度1.6mmSD （L） Part型号 number 1 1 Temperature 温度特性 characteristics Part型号 number 2 2 陶瓷电容器 HMK316 SD223KL-T QMK316 SD103KL-T 高温负载 HTLT 静电容量 Capacitance ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 1000 1500 2200 3300 4700 6800 0.01 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 2.5 2.5 2.5 2.5 2.5 2.5 2.5 120 120 120 120 120 120 120 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 Rated voltage x％ x％ ±10 ±10 0.1 0.1 200 150 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ ±10，±20 ±10，±20 3.5 3.5 200 150 Capacitance 静电容量 ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ 0.15 0.22 0.33 0.47 0.68 1 4.7 0.047 0.1 0.15 0.22 0.022 0.033 0.047 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 200 200 200 200 200 200 150 150 150 150 150 120 120 120 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 3.5 200 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ ±10，±20 3.5 200 p p p p p p μ 厚度 *3 ［*3 ］ mm Thickness [mm] 1.15±0.10 1.15±0.10 1.15±0.10 1.15±0.10 1.15±0.10 1.15±0.10 1.15±0.10 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R 】　1.6mm thickness（L） Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ 100 250 Standard Type 0.022 μ 0.01 μ HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 1.6±0.20 1.6±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R 325型 ●325TYPE 【Temperature Characteristic BJ 【温度特性 BJ : B/X5R】 厚度 2.5mm（M） Part型号 number 1 1 : B/X5R】　2.5mm thickness（M） Part型号 number 2 2 HMK325 BJ225[]M-P HMK325 BJ475[]M-PE 100 100 【Temperature Characteristic BJ 【温度特性 BJ : B/X5R】 厚度 1.9mm（N） Part型号 number 1 1 Part型号 number 2 2 250 630 Part型号 number 2 2 Part型号 number 2 2 Part型号 number 2 2 B B B B B B B B B B B B B B μ μ μ μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 Capacitance 静电容量 ［[F] F］ X5R*1 0.1 μ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X7R 2.2 μ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.15 0.22 0.33 0.47 0.68 1 0.047 0.1 0.15 0.22 0.022 0.033 0.047 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 200 200 200 200 200 200 150 150 150 150 120 120 120 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 Rated voltage x％ x％ ±10，±20 3.5 150 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 x％ Rated voltage x％ ±10，±20 3.5 150 B Rated voltage 额定电压 ［[V] V］ Rated voltage 额定电压 ［[V] V］ X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 630 2.5±0.20 2.5±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R *3 Thickness [mm] 厚度 *3 ［mm ］ 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R R R R R 厚度 *3 ［*3 ］ mm [mm] Thickness 1.15±0.10 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 2.5±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R μ μ μ μ μ μ μ μ μ μ μ μ μ HTLT 高温负载 *3 厚度 *3 ［mm ］ [mm] Thickness 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 1.9±0.20 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R R R R R R R : X7S】　2.5mm thickness（M） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X7S 4.7 μ Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X7S 4.7 μ 100 【Temperature Characteristic C7 【温度特性 C7 : X7S】 厚度 1.9mm（N） X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 高温负载 HTLT Temperature 温度特性 characteristics 250 HMK325 C7475[]M-PE HMK325 C7475[]N-TE Temperature 温度特性 characteristics 100 【Temperature Characteristic C7 【温度特性 C7 : X7S】 厚度 2.5mm（M） 厚度 *3 ［*3 ］ mm [mm] Thickness : X7R】　1.9mm thickness（N） HMK325 B7154[]N-T HMK325 B7224[]N-T HMK325 B7334[]N-T HMK325 B7474[]N-T HMK325 B7684[]N-T HMK325 B7105[]N-T QMK325 B7473[]N-T QMK325 B7104[]N-T QMK325 B7154[]N-T QMK325 B7224[]N-T SMK325 B7223[]N-T SMK325 B7333[]N-T SMK325 B7473[]N-T Part型号 number 1 1 2.2 μ 4.7 μ 100 【Temperature Characteristic B7 【温度特性 B7 : X7R】 厚度 1.9mm（N） Part型号 number 1 1 X5R*1 X5R*1 B B HTLT 高温负载 : X7R】　2.5mm thickness（M） HMK325 B7225[]M-P Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ 100 【Temperature Characteristic 【温度特性 B7 : X7R】 厚度 2.5mm（M）B7 Capacitance 静电容量 ［[F] F］ : B/X5R】　1.15mm thickness（F） HMK325 BJ104[]F-T Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ 100 【Temperature Characteristic BJ 【温度特性 BJ : B/X5R】 厚度 1.15mm（F） Temperature 温度特性 characteristics : B/X5R】　1.9mm thickness（N） HMK325 BJ154[]N-T HMK325 BJ224[]N-T HMK325 BJ334[]N-T HMK325 BJ474[]N-T HMK325 BJ684[]N-T HMK325 BJ105[]N-T HMK325 BJ475[]N-TE QMK325 BJ473[]N-T QMK325 BJ104[]N-T QMK325 BJ154[]N-T QMK325 BJ224[]N-T SMK325 BJ223[]N-T SMK325 BJ333[]N-T SMK325 BJ473[]N-T Part型号 number 1 1 Rated voltage 额定电压 ［[V] V］ HTLT 高温负载 厚度 *3 ［*3 ］ mm Thickness [mm] 2.5±0.20 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R : X7S】　1.9mm thickness（N） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 100 HTLT 高温负载 厚度 *3 ［*3 ］ mm [mm] Thickness 1.9±0.20 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 30 17 型号一览 ■PARTS NUMBER 【Temperature Characteristic B7 【温度特性 B7 : X7R】 厚度 1.15 mm（F） Part 型号 number 1 1 : X7R】　1.15mm thickness（F） Part 型号 number 2 2 HMK325 B7104[]F-T 额定电压 Rated voltage ［[V] V］ tanδ [％] 额定电压 x％ Rated voltage x％ ±10，±20 3.5 200 静电容量 Capacitance ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] 额定电压 Rated voltage x％ x％ 0.47 1 1.5 2.2 0.1 0.22 0.33 0.47 0.047 0.068 0.1 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 200 200 200 200 150 150 150 150 120 120 120 Capacitance 静电容量 ［[F] F］ 静电容量允许偏差 Capacitance tolerance [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.47 1 1.5 2.2 0.1 0.22 0.33 0.47 0.047 0.068 0.1 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 ±10，±20 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 200 200 200 200 150 150 150 150 120 120 120 静电容量 Capacitance ［[F] F］ X7R 0.1 μ 100 高温负载 HTLT 静电容量允许偏差 Capacitance tolerance [％] [％] Temperature 温度特性 characteristics Soldering 焊接方式 厚度 *3 ［*3 ］ mm Thickness [mm] ：回流焊 R R:Reflow ：波峰焊 WW:Wave 1.15±0.10 R 厚度 *3 ［*3 ］ mm Thickness [mm] ：回流焊 R R:Reflow ：波峰焊 WW:Wave 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 R R R R R R R R R R R 厚度 *3 ［*3 ］ mm Thickness [mm] ：回流焊 R R:Reflow ：波峰焊 WW:Wave 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 2.5±0.20 R R R R R R R R R R R 432型 ●432TYPE 【Temperature Characteristic BJ 【温度特性 BJ : B/X5R】 厚度 2.5mm（M） Part 型号 number 1 1 : B/X5R】 2.5mm thickness（M） Part 型号 number 2 2 100 250 630 【温度特性 B7 : X7R】 厚度 2.5mm（M）B7 【Temperature Characteristic Part 型号 number 1 1 HMK432 B7474[]M-T HMK432 B7105[]M-T HMK432 B7155[]M-T HMK432 B7225[]M-T QMK432 B7104[]M-T QMK432 B7224[]M-T QMK432 B7334[]M-T QMK432 B7474[]M-T SMK432 B7473[]M-T SMK432 B7683[]M-T SMK432 B7104[]M-T Temperature 温度特性 characteristics B B B B B B B B B B B X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 X5R*1 μ μ μ μ μ μ μ μ μ μ μ 高温负载 HTLT Soldering 焊接方式 陶瓷电容器 HMK432 BJ474[]M-T HMK432 BJ105[]M-T HMK432 BJ155[]M-T HMK432 BJ225[]M-T QMK432 BJ104[]M-T QMK432 BJ224[]M-T QMK432 BJ334[]M-T QMK432 BJ474[]M-T SMK432 BJ473[]M-T SMK432 BJ683[]M-T SMK432 BJ104[]M-T 额定电压 Rated voltage ［[V] V］ : X7R】 2.5mm thickness（M） Part 型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 100 250 630 Temperature 温度特性 characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R μ μ μ μ μ μ μ μ μ μ μ 高温负载 HTLT Soldering 焊接方式 c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 17 31 ■PARTS NUMBER TM LW 逆转型多层陶瓷电容器 Reversal Decoupling Capacitors（LWDC LW (LWDC ) TM ） 105型 ●105TYPE 【Temperature Characteristic 【温度特性 BJ : X5R】 厚度 0.3mm（P）BJ Part型号 number 1 1 : X5R】 0.3mm thickness（P） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ TWK105 BJ104MP-F EWK105 BJ224MP-F LWK105 BJ474MP-F JWK105 BJ104MP-F JWK105 BJ474MP-F JWK105 BJ105MP-F JWK105 BJ225MP-F 25 16 10 陶瓷电容器 Part型号 number 2 2 高温负载 HTLT Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.1 0.22 0.47 0.1 0.47 1 2.2 ±20 ±20 ±20 ±20 ±20 ±20 ±20 5 10 10 5 10 10 10 150 150 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.1 0.1 0.22 0.1 0.22 0.47 0.22 0.47 1 2.2 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 5 5 10 5 10 10 10 10 10 10 150 150 150 150 150 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] 0.1 0.22 0.47 1 2.2 1 2.2 4.7 10 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 5 5 5 10 10 10 10 10 10 150 150 150 150 150 150 150 150 150 Capacitance 静电容量 ［[F] F］ Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ 0.1 0.22 0.47 1 2.2 4.7 10 ±20 ±20 ±20 ±20 ±20 ±20 ±20 5 5 5 10 10 10 10 150 150 150 150 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±20 ±10，±20 ±20 ±20 10 10 10 10 10 150 150 150 150 150 Capacitance tolerance 静电容量允许偏差 [％] [％] tanδ [％] Rated voltage x％ 额定电压 x％ ±10，±20 ±10，±20 ±20 ±20 5 10 10 10 150 150 150 150 X5R X5R X5R X5R*1 X5R*1 X5R X5R 6.3 【Temperature C6 : X6S 【温度特性 C6 : X6SCharacteristic , C7 : X7S】厚度 0.3mm （P）, Part型号 number 1 1 Temperature 温度特性 characteristics μ μ μ μ μ μ μ 厚度 *3 ［*3 ］ mm Thickness [mm] 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R C7 : X7S】 0.3mm thickness（P） Rated voltage 额定电压 ［[V] V］ EWK105 C6104MP-F LWK105 C7104MP-F LWK105 C6224MP-F JWK105 C7104MP-F JWK105 C7224MP-F JWK105 C6474MP-F AWK105 C6224MP-F AWK105 C6474MP-F AWK105 C6105MP-F AWK105 C6225MP-F Temperature 温度特性 characteristics 16 X6S X7S X6S X7S X7S X6S X6S X6S X6S X6S 10 6.3 4 μ μ μ μ μ μ μ μ μ μ 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R R 107型 ●107TYPE 【Temperature Characteristic 【温度特性 BJ : X5R】 厚度 0.5mm（V）BJ Part型号 number 1 1 : X5R】 0.5mm thickness（V） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ TWK107 BJ104MV-T EWK107 BJ224MV-T EWK107 BJ474MV-T LWK107 BJ105MV-T LWK107 BJ225MV-T JWK107 BJ105MV-T JWK107 BJ225MV-T JWK107 BJ475MV-T AWK107 BJ106MV-T X5R*1 X5R*1 X5R*1 X5R X5R X5R*1 X5R X5R X5R 25 16 10 6.3 4 【Temperature B7 : 厚度 X7R0.5mm , C6（V） : X6S 【温度特性 B7 : X7RCharacteristic , C6 : X6S , C7 : X7S】 Part型号 number 1 1 Temperature 温度特性 characteristics Part型号 number 2 2 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 Soldering 焊接方式 R：回流焊 R:Reflow ：波峰焊 W W:Wave R R R R R R R R R , C7 : X7S】 0.5mm thickness（V） Rated voltage 额定电压 ［[V] V］ TWK107 B7104MV-T EWK107 B7224MV-T EWK107 B7474MV-T JWK107 C7105MV-T AWK107 C7225MV-T AWK107 C6475MV-T PWK107 C6106MV-T μ μ μ μ μ μ μ μ μ HTLT 高温负载 *3 3 [mm] Thickness Rated voltage x ％ 厚度 * ［mm］ 额定电压 x％ Temperature 温度特性 characteristics 25 X7R X7R X7R X7S X7S X6S X6S 16 6.3 4 2.5 μ μ μ μ μ μ μ 高温负载 HTLT 厚度 *3 ［*3 ］ Thickness mm [mm] 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R R R 212型 ●212TYPE 【Temperature Characteristic BJ 【温度特性 BJ : X5R】 厚度 0.85mm（D） Part型号 number 1 1 : X5R】 0.85mm thickness（D） Part型号 number 2 2 Rated voltage 额定电压 ［[V] V］ 25 16 TWK212 BJ475[]D-T EWK212 BJ106MD-T LWK212 BJ475[]D-T LWK212 BJ106MD-T JWK212 BJ226MD-T 10 6.3 【Temperature B7 : X7R , C6 【温度特性 B7 : X7RCharacteristic , C6 : X6S】厚度 0.85mm （D） Part型号 number 1 1 TWK212 B7225[]D-T EWK212 C6475[]D-T LWK212 C6106MD-T AWK212 C6226MD-T Part型号 number 2 2 Temperature 温度特性 characteristics Capacitance 静电容量 ［[F] F］ X5R X5R X5R X5R X5R 4.7 10 4.7 10 22 μ μ μ μ μ 高温负载 HTLT 厚度 *3 ［*3 ］ mm Thickness [mm] 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R R : X6S】 0.85mm thickness（D） Rated voltage 额定电压 ［[V] V］ 25 16 10 4 Temperature 温度特性 characteristics X7R X6S X6S X6S Capacitance 静电容量 ［[F] F］ 2.2 4.7 10 22 μ μ μ μ HTLT 高温负载 *3 [mm] Thickness 厚度 *3 ［mm ］ 0.85±0.10 0.85±0.10 0.85±0.10 0.85±0.10 Soldering 焊接方式 R:Reflow R：回流焊 ：波峰焊 W W:Wave R R R R c_mlcc_e-E05R01 ▶ 由于篇幅有限，本产品目录中只记载了有代表性的产品规格，若考虑使用弊司产品时，请确认交货规格说明书中的详细规格。 另外，有关各产品的详细信息 （特性图、可靠性信息、使用时的注意事项等），请参阅弊司网站 （http://www.ty-top.com/ ）。 32 17 Multilayer Ceramic Capacitors ■PACKAGING ①Minimum Quantity ●Taped package Thickness Type(EIA) □MK021(008004) □MK042(01005) □VS042(01005) □MK063(0201) □WK105(0204) ※ □MK105(0402) □VK105(0402) □MK107(0603) □WK107(0306) ※ □MR107(0603) □VS107(0603) □MJ107(0603) □MK212(0805) □WK212(0508) ※ □MR212(0805) □VS212(0805) □MJ212(0805) □MK316(1206) □MR316(1206) □MJ316(1206) □MK325(1210) □MR325(1210) □MJ325(1210) □MK432(1812) Note : ※ LW Reverse type. mm 0.125 0.2 0.2 0.3 0.3 0.13 0.18 0.2 0.3 0.5 0.5 0.45 0.5 0.8 0.7 0.8 0.45 0.85 1.25 0.85 0.85 1.25 0.85 1.15 1.6 1.15 1.6 0.85 1.15 1.9 2.0max. 2.5 1.9 2.5 2.5 code K C, D C P,T P H E C P V W K V A C A K D G D D G D F L F L D F N Y M N M M Standard quantity [pcs] Paper tape Embossed tape － 50000 － 40000 15000 10000 － － 20000 15000 10000 10000 4000 － 4000 4000 3000 － － 20000 15000 － － － － － 4000 － － 3000 4000 － － 4000 4000 － 4000 － － － － 3000 － － 2000 － 3000 2000 3000 2000 － 2000 － － － － 1000 2000 500(T), 1000(P) 500 ②Taping material ※No bottom tape for pressed carrier tape ●Card board carrier tape ●Embossed tape Top tape Top tape Base tape Sprocket hole Sprocket hole Bottom tape Chip cavity Base tape Chip cavity ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_pack_e-E05R01 Chip filled Chip ※ LW Reverse type. ③Representative taping dimensions ●Paper Tape（8mm wide） ●Pressed carrier tape（ 2mm pitch） Unit：mm（inch） A B T 8.0±0.3 (0.315±0.012) Sprocket hole 1.75±0.1 (0.069±0.004） 3.5±0.05 (0.138±0.002) φ1.5＋0.1/－0 (φ0.059＋0.004/-0) T1 2.0±0.05 (0.079±0.002) F 4.0±0.1 (0.157±0.004) Chip Cavity Type(EIA) Ａ 0.37 Insertion Pitch Ｆ Ｂ 0.67 □MK063(0201) □WK105(0204) ※ 0.65 1.15 □MK105(0402) （*1 C） □MK105(0402) （*1 P） Note *1 Thickness, C：0.2mm ,P：0.3mm. ※ LW Reverse type. 2.0±0.05 ●Punched carrier tape （2mm pitch） 0.45max. 0.42max. 0.4max. 0.45max. 0.3max. 0.42max. Unit：mm T 8.0±0.3 (0.315±0.012) B 2.0±0.05 (0.079±0.002) 1.75±0.1 (0.069±0.004） 3.5±0.05 (0.138±0.002) A F T1 Unit：mm（inch） φ1.5＋0.1/－0 (φ0.059＋0.004/-0) Sprocket hole Tape Thickness Ｔ 4.0±0.1 (0.157±0.004) Ａ Chip Cavity Ｂ Insertion Pitch Ｆ Tape Thickness Ｔ 0.65 1.15 2.0±0.05 0.8max. Type(EIA) □MK105 (0402) □VK105 (0402) Unit：mm ●Punched carrier tape （4mm pitch） B T 8.0±0.3 (0.315±0.012) A F Unit：mm（inch） 1.75±0.1 (0.069±0.004） 3.5±0.05 (0.138±0.002) Sprocket hole φ1.5＋0.1/－0 (φ0.059＋0.004/-0) 4.0±0.1 (0.157±0.004) 2.0±0.1 (0.079±0.004) ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_pack_e-E05R01 Chip Cavity Type(EIA) Ａ Insertion Pitch Ｆ Ｂ □MK107(0603) □WK107(0306) ※ 1.0 1.8 □MR107(0603) 4.0±0.1 □MK212(0805) 1.65 2.4 □WK212(0508) ※ □MK316(1206) 2.0 3.6 Note：Taping size might be different depending on the size of the product. ※ LW Reverse type. ●Embossed tape（4mm wide） Unit：mm 4.0±0.05 (0.157±0.002) B 1.0±0.02 (0.039±0.001) 1.1max. 0.9±0.05 (0.035±0.002) 1.8±0.02 (0.071±0.001) A F 1.1max. Unit：mm（inch） φ0.8±0.04 (φ0.031±0.002) Sprocket hole Tape Thickness Ｔ 2.0±0.04 (0.079±0.002) Chip Cavity Type(EIA) □MK021(008004) □MK042(01005) □VS042(01005) Ａ 0.135 Ｂ 0.27 0.23 0.43 Insertion Pitch Ｆ K Tape Thickness T 1.0±0.02 0.5max. 0.25max. Unit：mm ●Embossed tape（8mm wide） Unit：mm（inch） 3.5±0.05 (0.138±0.002) Sprocket hole A B F 1.75±0.1 (0.069±0.004） 8.0±0.3 (0.315±0.012) φ1.5＋0.1/－0 (φ0.059＋0.004/-0) 4.0±0.1 (0.157±0.004) 2.0±0.1 (0.079±0.004) Type(EIA) □MK105(0402) □WK107(0306) ※ □MK212(0805) □MR212(0805) □MK316(1206) □MR316(1206) □MK325(1210) □MR325(1210) Note： ※ LW Reverse type. Chip Cavity Ａ 0.6 1.0 Ｂ 1.1 1.8 1.65 2.4 2.0 3.6 2.8 3.6 Insertion Pitch Ｆ 2.0±0.1 4.0±0.1 Tape Thickness K 0.6max 1.3max. T 0.2±0.1 0.25±0.1 3.4max. 0.6max. Unit：mm ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_pack_e-E05R01 ●Embossed tape（12mm wide） Unit：mm（inch） 5.5±0.05 (0.217±0.002) Sprocket hole A B 4.0±0.1 (0.157±0.004) 12.0±0.3 (0.472±0.012) 1.75±0.1 (0.069±0.004） φ1.5＋0.1/－0 (φ0.059＋0.004/-0) 2.0±0.1 (0.079±0.004) F Chip Cavity Type(EIA) Ａ 3.1 3.7 □MK325(1210) □MK432(1812) Insertion Pitch Ｆ 8.0±0.1 8.0±0.1 Ｂ 4.0 4.9 Tape Thickness K 4.0max. 4.0max. T 0.6max. 0.6max. Unit：mm ④Trailer and Leader Blank portion Chip cavity Blank portion Leader 100mm or more (3.94inches or more) 160mm or more (6.3inches or more) Direction of tape feed 400mm or more (15.7inches or more) ⑤Reel size t E C R B A D W A φ178±2.0 B φ50min. C φ13.0±0.2 D φ21.0±0.8 4mm wide tape 8mm wide tape 12mm wide tape T 1.5max. 2.5max. 2.5max. W 5±1.0 10±1.5 14±1.5 Unit：mm E 2.0±0.5 R 1.0 ⑥Top Tape Strength The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below. Pull direction 0～20° Top tape Base tape ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_pack_e-E05R01 Super Low Distortion Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and High Reliability Application Multilayer Ceramic Capacitors are noted separately. Multilayer Ceramic Capacitors ■RELIABILITY DATA 1.Operating Temperature Range Temperature Compensating（Class1） Standard High Frequency Type －55 to ＋125℃ B7 C6 C7 Specification B X5R X7R X6S X7S Temperature Range －25 to ＋85℃ －55 to ＋85℃ －55 to ＋125℃ －55 to ＋105℃ －55 to ＋125℃ LD(※) X5R －55 to ＋85℃ BJ Specified Value High Permittivity （Class2） Note: ※LD Low distortion high value multilayer ceramic capacitor 2. Storage Conditions Temperature Compensating（Class1） Standard High Frequency Type －55 to ＋125℃ Specification Temperature Range B －25 to ＋85℃ BJ X5R －55 to ＋85℃ B7 X7R －55 to ＋125℃ C6 X6S －55 to ＋105℃ C7 X7S －55 to ＋125℃ LD(※) X5R －55 to ＋85℃ Note: ※LD Low distortion high value multilayer ceramic capacitor Specified Value High Permittivity （Class2） 3. Rated Voltage Specified Value Temperature Compensating（Class1） Standard 50VDC, 25VDC, 16VDC High Frequency Type 50VDC, 25VDC, 16VDC High Permittivity （Class2） 50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC, 2.5VDC 4. Withstanding Voltage （Between terminals） Specified Value Temperature Compensating（Class1） Standard High Frequency Type No breakdown or damage High Permittivity （Class2） Test Methods and Remarks Class 1 Rated voltage×3 Applied voltage Duration Charge/discharge current Class 2 Rated voltage×2.5 1 to 5 sec. 50mA max. 5. Insulation Resistance Specified Value Temperature Compensating（Class1） Standard High Frequency Type High Permittivity （Class2） Note 1 Test Methods and Remarks Applied voltage Duration Charge/discharge current 10000 MΩmin. C≦0.047μF : 10000 MΩ min. C＞0.047μF : 500MΩ・μF : Rated voltage : 60±5 sec. : 50mA max. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E05R01 6. Capacitance （Tolerance） Specified Value Standard C□ U□ SL 0.2pF≦C≦5pF 0.2pF≦C≦10pF C＞10pF : ±0.25pF : ±0.5pF : ±5% or ±10% High Frequency Type CG 0.2pF≦C≦2pF C＞2pF : ±0.1pF : ±5% Temperature Compensating（Class1） High Permittivity （Class2） Test Methods and Remarks ±10% or ±20% Standard Preconditioning Measuring frequency Measuring voltage Nte Bias application Class 1 High Frequency Type None 1ＭHz±10% 0.5 to 5Vrms Class 2 C≦10μF C＞10μF Thermal treatment （at 150℃ for 1hr） Note 2 1kHz±10% 120±10Hz 1±0.2Vrms 0.5±0.1Vrms None 7. Q or Dissipation Factor Specified Value Temperature Compensating（Class1） C＜30pF : Q≧400＋20C C≧30pF : Q≧1000 （C：Nominal capacitance） Standard High Frequency Type High Permittivity （Class2） Note 1 Refer to detailed specification BJ, B7, C6, C7：2.5% max. Class 1 High Frequency Type None 1ＭHz±10% 1GHz 0.5 to 5Vrms Standard Test Methods and Remarks Preconditioning Measuring frequency Measuring voltage Note 1 Bias application High Frequency Type Measuring equipment Measuring jig Class 2 C≦10μF C＞10μF Thermal treatment （at 150℃ for 1hr） Note 2 1ｋHz±10% 120±10Hz 1±0.2Vrms 0.5±0.1Vrms None : HP4291A : HP16192A 8. Temperature Characteristic （Without voltage application） Temperature Characteristic ［ppm/℃］ C□ : 0 CG Standard Temperature Compensating（Class1） U□ : －750 SL High Frequency Type UJ, UK : ＋350 to －1000 Temperature Characteristic ［ppm/℃］ C□ : 0 CG Specified Value Tolerance ［ppm/℃］ G : ±30 J：±120 K：±250 Tolerance ［ppm/℃］ G : ±30 Capacitance Reference Temperature Range change temperature ±10% 20℃ －25 to ＋85℃ ±15% 25℃ －55 to ＋85℃ ±15% 25℃ －55 to ＋125℃ ±22% 25℃ －55 to ＋105℃ ±22% 25℃ －55 to ＋125℃ ±15% 25℃ －55 to ＋85℃ distortion high value multilayer ceramic capacitor Specification B X5R B7 X7R C6 XS C7 X7S LD(※) X5R Note : ※LD Low BJ High Permittivity （Class2） Class 1 Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation. （C85－C20） ×106（ppm/℃） △T＝65 C20×△T Test Methods and Remarks Class 2 Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation. Step B X5R、X7R、X6S、X7S 1 Minimum operating temperature 2 20℃ 25℃ 3 Maximum operating temperature （C－C2） C2 ×100（%） C ：Capacitance in Step 1 or Step 3 C2 ：Capacitance in Step 2 9. Deflection ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E05R01 Specified Value Temperature Compensating（Class1） Standard Appearance Capacitance change : No abnormality : Within ±5% or ±0.5 pF, whichever is larger. High Frequency Type Appearance Capacitance change : No abnormality : Within±0.5 pF Appearance Capacitance change : No abnormality : Within ±12.5% High Permittivity （Class2） Board Thickness Warp Duration Test Methods and Remarks Multilayer Ceramic Capacitors 021, 042, 063, ※105 Type The other types Glass epoxy-resin substrate 0.8mm 1.6mm 1mm 10 sec. ※ 105 Type thickness, C： 0.2mm ,P： 0.3mm. Capacitance measurement shall be conducted with the board bent 10. Body Strength Specified Value Standard Temperature Compensating（Class1） High Frequency Type High Permittivity （Class2） Test Methods and Remarks － No mechanical damage. － High Frequency Type Applied force : 5N Duraton : 10 sec. 11. Adhesive Strength of Terminal Electrodes Specified Value Standard Temperature Compensating（Class1） High Frequency Type No terminal separation or its indication. High Permittivity （Class2） Test Methods and Remarks Applied force Duration Multilayer Ceramic Capacitors 021, 042, 063 Type 105 Type or more 2N 5N 30±5 sec. 12. Solderability Specified Value Temperature Compensating（Class1） Standard High Frequency Type At least 95% of terminal electrode is covered by new solder. High Permittivity （Class2） Test Methods and Remarks Solder type Solder temperature Duration Eutectic solder H60A or H63A 230±5℃ Lead-free solder Sn-3.0Ag-0.5Cu 245±3℃ 4±1 sec. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E05R01 13. Resistance to Soldering Standard Appearance Capacitance change Q Insulation resistance Withstanding voltage : No abnormality : Within ±2.5% or ±0.25pF, whichever is larger. : Initial value : Initial value （between terminals） : No abnormality High Frequency Type Appearance Capacitance change Q Insulation resistance Withstanding voltage : No abnormality : Within ±2.5% : Initial value : Initial value （between terminals） : No abnormality Appearance Capacitance change Dissipation factor Insulation resistance Withstanding voltage : No abnormality : Within ±7.5% : Initial value : Initial value （between terminals）: No abnormality Temperature Compensating（Class1） Specified Value High Permittivity （Class2） Note 1 Class 1 021, 042, 063 Type 105 Type Preconditioning Preheating Test Methods and Remarks None 80 to 100℃, 2 to 5 min. 150 to 200℃, 2 to 5 min. 150℃, 1 to 2 min. Solder temp. Duration Recovery 270±5℃ 3±0.5 sec. 6 to 24 hrs （Standard condition） Note 5 021, 042、063 Type Preconditioning Preheating 150℃, 1 to 2 min. Solder temp. Duration Recovery Class 2 105, 107, 212 Type 316, 325, 432 Type Thermal treatment （at 150℃ for 1 hr） Note 2 80 to 100℃, 2 to 5 min. 80 to 100℃, 5 to 10 min. 150 to 200℃, 2 to 5 min. 150 to 200℃, 5 to 10 min. 270±5℃ 3±0.5 sec. 24±2 hrs （Standard condition） Note 5 14. Temperature Cycle (Thermal Shock） Standard Appearance Capacitance change Q Insulation resistance Withstanding voltage : No abnormality : Within ±2.5% or ±0.25pF, whichever is larger. : Initial value : Initial value （between terminals） : No abnormality High Frequency Type Appearance Capacitance change Q Insulation resistance Withstanding voltage : No abnormality : Within ±0.25pF : Initial value : Initial value （between terminals） : No abnormality Appearance Capacitance change Dissipation factor Insulation resistance Withstanding voltage : No abnormality : Within ±7.5% : Initial value : Initial value （between terminals） : No abnormality Temperature Compensating（Class1） Specified Value High Permittivity （Class2） Note 1 Class 1 Preconditioning Test Methods and Remarks 1 cycle Number of cycles Recovery Class 2 Thermal treatment （at 150℃ for 1 hr） Note 2 None Step 1 2 3 4 Temperature（℃） Minimum operating temperature Normal temperature Maximum operating temperature Normal temperature Time（min.） 30±3 2 to 3 30±3 2 to 3 5 times 6 to 24 hrs （Standard condition） Note 5 24±2 hrs （Standard condition） Note 5 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E05R01 15. Humidity （Steady State） Appearance Capacitance change Q Standard Temperature Compensating（Class1） Specified Value High Frequency Type High Permittivity （Class2） Note 1 Insulation resistance : No abnormality : Within ±5% or ±0.5pF, whichever is larger. : C＜10pF : Q≧200＋10C 10≦C＜30pF : Q≧275＋2.5C C≧30pF:Q≧350（C：Nominal capacitance） : 1000 MΩmin. Appearance Capacitance change Insulation resistance : No abnormality : Within ±0.5pF, : 1000 MΩmin. Appearance Capacitance change Dissipation factor Insulation resistance : : : : Class 1 Standard Test Methods and Remarks Preconditioning Temperature Humidity Duration Recovery No abnormality Within ±12.5% 5.0% max. 50 MΩμF or 1000 MΩwhichever is smaller. Class 2 All items Thermal treatment（ at 150℃ for 1 hr） Note 2 40±2℃ 90 to 95%RH 500＋24/－0 hrs 24±2 hrs （Standard condition） Note 5 High Frequency Type None 40±2℃ 60±2℃ 90 to 95%RH 500＋24/－0 hrs 6 to 24 hrs （Standard condition） Note 5 16. Humidity Loading Appearance Capacitance change Q Standard Insulation resistance Temperature Compensating（Class1） Specified Value Appearance Capacitance change Note 1 Appearance Capacitance change Dissipation factor Insulation resistance : : : : 90 to 95%RH 500＋24/－0 hrs Rated voltage 50mA max. 50mA max. 6 to 24 hrs （Standard condition） Note 5 24±2 hrs（Standard condition） Note 5 Preconditioning Temperature Humidity Duration Applied voltage Charge/discharge current Recovery Class 1 High Frequency Type No abnormality Within ±12.5% 5.0% max. 25 MΩμF or 500 MΩ, whichever is smaller. Class 2 All items Voltage treatment （Rated voltage are applied for 1 hour at 40℃） Note 3 40±2℃ 90 to 95%RH 500＋24/－0 hrs Rated voltage Standard Test Methods and Remarks Insulation resistance : No abnormality : C≦2pF：Within ±0.4 pF C＞2pF：Within ±0.75 pF （C：Nominal capacitance） : 500 MΩmin. High Frequency Type High Permittivity （Class2） : No abnormality : Within ±7.5% or ±0.75pF, whichever is larger. : C＜30pF：Q≧100＋10C/3 C≧30pF：Q≧200 （C：Nominal capacitance） : 500 MΩmin. None 40±2℃ 60±2℃ ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E05R01 17. High Temperature Loading Appearance Capacitance change Q Standard Temperature Compensating（Class1） Specified Value High Frequency Type High Permittivity （Class2） Note 1 Test Methods and Remarks Temperature Duration Applied voltage Charge/discharge current Recovery Appearance Capacitance change Insulation resistance : No abnormality : Within ±3% or ±0.3pF, whichever is larger. : 1000 MΩmin. Appearance Capacitance change Dissipation factor Insulation resistance : : : : Class 1 High Frequency Type No abnormality Within ±12.5% 5.0% max. 50 MΩμF or 1000 MΩ, whichever is smaller. Maximum operating temperature 1000＋48/－0 hrs Rated voltage×2 Note 4 Class 2 BJ, LD(※) C6 B7, C7 Voltage treatment（Twice the rated voltage shall be applied for 1 hour at 85℃, 105℃ or 125℃） Note 3, 4 Maximum operating temperature 1000＋48/－0 hrs Rated voltage×2 Note 4 50mA max. 50mA max. 6 to 24hr （Standard condition） Note 5 24±2 hrs （Standard condition） Note 5 Standard Preconditioning Insulation resistance : No abnormality : Within ±3% or ±0.3pF, whichever is larger. : C＜10pF： Q≧200＋10C 10≦C＜30pF：Q≧275＋2.5C C≧30pF： Q≧350（C：Nominal capacitance） : 1000 MΩmin. None Note: ※LD Low distortion high value multilayer ceramic capacitor Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail. Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for 24±2hours. Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and kept at room temperature for 24±2hours. Note 4 150% of rated voltage is applicable to some items. Please refer to their specifications for further information. Note 5 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition. Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the "standard condition". ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_reli_e-E05R01 Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and High Reliability Application Multilayer Ceramic Capacitors are noted separately. Super Low Distortion Multilayer Ceramic Capacitors ■RELIABILITY DATA 1. Operating Temperature Range Specified Value －55 to ＋125℃ 2. Storage Temperature Range Specified Value －55 to ＋125℃ 3. Rated Voltage Specified Value 6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC 4. Dielectric Withstanding Voltage （Between terminals） Specified Value No breakdown or damage Test Methods and Remarks Applied voltage Duration Charge/discharge current : Rated voltage×3 : 1 to 5 sec. : 50mA max. ５．Insulation Resistance Specified Value 10000 MΩor 500MΩμF, whichever is smaller Test Methods and Remarks Applied voltage Duration Charge/discharge current : Rated voltage : 60±5 sec. : 50mA max. 6．Capacitance （Tolerance） Specified Value ±10％ Test Methods and Remarks Measuring frequency Measuring voltage Bias application : 1kHz±10% : 1±0.2Vrms : None ７．Dissipation Factor Specified Value 0.1%max Test Methods and Remarks Measuring frequency Measuring voltage Bias application : 1kHz±10% : 1±0.2Vrms : None Appearance Capacitance change : No abnormality : ±5% 8．Bending Strength Specified Value Test Methods and Remarks Warp Speed Duration Test board Thickness : : : : : 1mm 0.5mm/second 10 seconds glass epoxy resin substrate 1.6mm Capacitance measurement shall be conducted with the board bent. 9．Adhesive Force of Terminal Electrodes Specified Value Terminal electrodes shall be no exfoliation or a sign of exfoliation. Applied force Duration : 5N : 30 ±5 seconds Test Methods and Remarks ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_CFcap_reli_e-E05R01 10．Solderability Specified Value Test Methods and Remarks At least 95% of terminal electrode is covered by new solder. Eutectic solder H60A or H63A 230±5℃ Solder type Solder temperature Duration Lead-free solder Sn-3.0Ag-0.5Cu 245±3℃ 4±1 sec. 11．Resistance to Soldering Heat Specified Value Test Methods and Remarks Appearance Capacitance change Dissipation factor Insulation resistance Withstanding voltage : No abnormality : ±2.5% max. : Initial value : Initial value （between terminals） : No abnormality Solder temp. Duration Preheating conditions Measurement shall be conducted : 270 ±5℃ : 3 ±0.5 sec. : 80 to 100℃, 2 to 5 min. or 5 to 10 min. 150 to 200℃, 2 to 5 min. or 5 to 10 min. : 24±2hrs under the standard condition Note1 12．Temperature Cycle （Thermal Shock） Specified Value Test Methods and Remarks Appearance Capacitance change Dissipation factor Insulation resistance Withstanding voltage : No abnormality : ±2.5% max : Initial value : Initial value （between terminals）: No abnormality Conditions for 1 cycle Step temperature（℃） 1 Minimum operating temperature 2 Normal temperature 3 Maximum operating temperature 4 Normal temperature Number of cycles: 5 times Measurement shall be conducted : 24±2hrs under the standard condition Time（min.） 30±3 min. 2 to 3 min. 30±3 min. 2 to 3 min. Note1 13．Humidity （Steady state） Specified Value Appearance Capacitance change Dissipation factor Insulation resistance : : : : No abnormality ±5% max 0.5% max 50MΩμF or 1000MΩ, whichever is smaller Test Methods and Remarks Temperature Humidity Duration Measurement shall be conducted : : : : 40±2℃ 90 to 95% RH 500 ＋24/－0 hrs 24 ±2hrs under the standard condition Note1 14．Humidity Loading Specified Value Test Methods and Remarks Appearance Capacitance change Dissipation factor Insulation resistance : : : : No abnormality ±7.5% max 0.5% max 25MΩμF or 500MΩ, whichever is smaller According to JIS C 5101-1. Temperature Humidity Duration Applied voltage Charge/discharge current Measurement shall be conducted : 40±2℃ : 90 to 95% RH : 500 ＋24/－0 hrs : Rated voltage : 50mA max : 24 ±2hrs under the standard condition Note1 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_CFcap_reli_e-E05R01 15．High Temperature Loading Specified Value Test Methods and Remarks Appearance Capacitance change Dissipation factor Insulation resistance : : : : No abnormality ±3% max 0.35% max 50MΩμF or 1000MΩ, whichever is smaller According to JIS C 5101-1. Temperature Duration Applied voltage Charge/discharge current Measurement shall be conducted : : : : : Maximum operating temperature 1000 ＋48/－0 hrs Rated voltage x 2 50mA max 24 ±2hrs under the standard condition Note1 Note1 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition. Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the "standard condition". ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_CFcap_reli_e-E05R01 Multilayer Ceramic Capacitors , Super Low Distortion Multilayer Ceramic Capacitors and High Reliability Application Multilayer Ceramic Capacitors are noted separately. Medium-High Voltage Multilayer Ceramic Capacitor ■RELIABILITY DATA 1. Operating Temperature Range Specified Value Temperature Compensating（Class1） CG : －55 to ＋125℃ High Permittivity （Class2） X7R, X7S X5R B SD : : : : Temperature Compensating（Class1） CG : －55 to ＋125℃ High Permittivity （Class2） X7R, X7S X5R B SD : : : : Temperature Compensating（Class1） 100VDC(HMK) High Permittivity （Class2） 100VDC(HMK), 250VDC(QMK), 630VDC(SMK) －55 －55 －25 －55 to to to to ＋125℃ ＋85℃ ＋85℃ ＋125℃ 2. Storage Temperature Range Specified Value －55 －55 －25 －55 to to to to ＋125℃ ＋85℃ ＋85℃ ＋125℃ 3. Rated Voltage Specified Value 4. Withstanding Voltage（Between terminals） Specified Value No breakdown or damage Test Methods and Remarks Applied voltage Duration Charge/discharge current : Rated voltage×2.5（HMK）, Rated voltage×2（QMK）, Rated voltage×1.2（SMK） : 1 to 5sec. : 50mA max. 5. Insulation Resistance Specified Value Test Methods and Remarks Temperature Compensating（Class1） 10000 MΩmin. High Permittivity （Class2） 100MΩ・μF or 10GΩ, whichever is smaller. Applied voltage Duration Charge/discharge current : Rated voltage（HMK, QMK）, 500V（SMK） : 60±5sec. : 50mA max. 6. Capacitance （Tolerance） Specified Value Temperature Compensating（Class1） 0.2pF≦C≦5pF 0.2pF≦C≦10pF C＞10pF ： ±0.25pF ： ±0.5pF ： ±5% or ±10% High Permittivity （Class2） ±10%, ±20% Temperature Compensating（Class1） Measuring frequency Measuring voltage Bias application : 1MHz±10% : 0.5～5Vrms : None High Permittivity （Class2） Measuring frequency Measuring voltage Bias application : 1kHz±10% : 1±0.2Vrms : None Test Methods and Remarks 7. Q or Dissipation Factor Specified Value Temperature Compensating（Class1） C＜30pF : Q≧400＋20C C≧30pF : Q≧1000 （C：Nominal capacitance） High Permittivity （Class2） 3.5%max（HMK）,2.5%max（QMK, SMK） Temperature Compensating（Class1） Measuring frequency Measuring voltage Bias application : 1MHz±10% : 0.5～5Vrms : None High Permittivity （Class2） Measuring frequency Measuring voltage Bias application : 1kHz±10% : 1±0.2Vrms : None Test Methods and Remarks ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_mhv_reli_e-E05R01 8. Temperature Characteristic of Capacitance Specified Value Test Methods and Remarks Temperature Compensating（Class1） CG ：0±30ppm/℃(－55 to ＋125℃) High Permittivity （Class2） B X5R X7R X7S SD : : : : : ±10%（－25 ±15%（－55 ±15%（－55 ±22%（－55 - （－55 to to to to to ＋85℃） ＋85℃） ＋125℃ ＋125℃） ＋125℃） Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation. Step CG、 B、X5R、X7R、X7S、SD 1 Minimum operating temperature 2 20℃ 25℃ 3 Maximum operating temperature （C－C2） ×100（%） C2 C : Capacitance value in Step 1 or Step 3 C2 : Capacitance value in Step 2 9. Deflection Temperature Compensating（Class1） Appearance Capacitance change High Permittivity （Class2） Appearance Capacitance change Specified Value Test Methods and Remarks Warp Duration Test board Thickness : : : : : No abnormality : Within ±5% or ±0.5 pF, whichever is larger. : No abnormality : Within±10% 1mm 10sec. Glass epoxy-resin substrate 1.6mm Capacitance measurement shall be conducted with the board bent. 10. Adhesive Strength of Terminal Electrodes Specified Value Temperature Compensating（Class1） High Permittivity （Class2） Applied force Duration No terminal separation or its indication. : 5N : 30±5sec. Test Methods and Remarks 11. Solderability Specified Value Test Methods and Remarks Temperature Compensating（Class1） High Permittivity （Class2） Solder type Solder temperature Duration At least 95% of terminal electrode is covered by new solder Eutectic solder H60A or H63A 230±5℃ Lead-free solder Sn-3.0Ag-0.5Cu 245±3℃ 4±1 sec. 12. Resistance to Soldering Temperature Compensating（Class1） Appearance Capacitance change Q Insulation resistance Withstanding voltage : No abnormality : Within ±2.5% or ±0.25pF, whichever is larger.(HMK) : Initial value : Initial value （between terminals） : No abnormality High Permittivity （Class2） Appearance Capacitance change Dissipation facto Insulation resistance Withstanding voltage : No abnormality : Within±15%（HMK）, ±10%（QMK, SMK） : Initial value : Initial value （between terminals） : No abnormality Specified Value ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_mhv_reli_e-E05R01 Preconditioning Solder temperature Duration Preheating conditions Test Methods and Remarks Recovery Preconditioning Solder temperature Duration Preheating conditions Recovery Temperature Compensating（Class1） None 270±5℃ 3±0.5sec. 80 to 100℃, 2 to 5 min. 150 to 200℃, 2 to 5min. 24±2hrs under the standard condition Note3 High Permittivity （Class2） Thermal treatment（at 150℃ for 1hr） Note1 270±5℃ 3±0.5sec. 80 to 100℃, 2 to 5 min. 150 to 200℃, 2 to 5min. 24±2hrs under the standard condition Note3 13. Temperature Cycle （Thermal Shock） Temperature Compensating（Class1） Appearance Capacitance change Q Insulation resistance Withstanding voltage : No abnormality : Within ±2.5% or ±0.25pF, whichever is larger.(HMK) : Initial value : Initial value （between terminals） : No abnormality High Permittivity （Class2） Appearance Capacitance change Dissipation facto Insulation resistance Withstanding voltage : No abnormality : Within±15%（HMK）, ±10%（QMK, SMK） : Initial value : Initial value （between terminals） : No abnormality Specified Value Class 1 Preconditioning Test Methods and Remarks Class 2 Thermal treatment （at 150℃ for 1 hr） Note 1 None Step 1 2 3 4 1 cycle Number of cycles Recovery Temperature（℃） Minimum operating temperature Normal temperature Maximum operating temperature Normal temperature Time（min.） 30±3 2 to 3 30±3 2 to 3 5 times 6 to 24 hrs （Standard condition） Note 3 24±2 hrs （Standard condition） Note 3 14. Humidity （Steady state） Temperature Compensating（Class1） Specified Value High Permittivity （Class2） Test Methods and Remarks Preconditioning Temperature Humidity Duration Recovery Appearance Capacitance change Q Insulation resistance : No abnormality : Within ±5% or ±0.5pF, whichever is larger.(HMK) : C＜10pF : Q≧200＋10C 10≦C＜30pF : Q≧275＋2.5C C≧30pF:Q≧350（C：Nominal capacitance） : 1000 MΩmin. Appearance Capacitance change Dissipation factor Insulation resistance : No abnormality : Within±15% : 7%max（HMK）, 5%max（QMK, SMK）. : 25MΩμF or 1000MΩ, whichever is smaller. Class 1 None 40±2℃ 90 to 95%RH 500＋24/－0 hrs 6 to 24 hrs （Standard condition） Note 3 Class 2 Thermal treatment（ at 150℃ for 1 hr） Note 1 40±2℃ 90 to 95%RH 500＋24/－0 hrs 24±2 hrs （Standard condition） Note 3 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_mhv_reli_e-E05R01 15. Humidity Loading Appearance Capacitance change Q Temperature Compensating（Class1） Specified Value High Permittivity （Class2） Insulation resistance : No abnormality : Within ±7.5% or ±0.75pF, whichever is larger (HMK). : C＜30pF：Q≧100＋10C/3 C≧30pF：Q≧200 （C：Nominal capacitance） : 500 MΩmin. Appearance Capacitance change Dissipation factor Insulation resistance : No abnormality : Within±15% : 7%max（HMK）, 5%max（QMK, SMK）. : 10MΩμF or 500MΩ, whichever is smaller. According to JIS 5101-1. Class 1 40±2℃ 90 to 95%RH 500＋24/－0 hrs Rated voltage Class 2 Voltage treatment （Rated voltage are applied for 1 hour at 40℃） Note 2 40±2℃ 90 to 95%RH 500＋24/－0 hrs Rated voltage 50mA max. 50mA max. 6 to 24 hrs （Standard condition） Note 3 24±2 hrs（Standard condition） Note 3 Preconditioning Test Methods and Remarks None Temperature Humidity Duration Applied voltage Charge/discharge current Recovery 16. High Temperature Loading Appearance Capacitance change Q Temperature Compensating（Class1） Specified Value High Permittivity （Class2） Insulation resistance : No abnormality : Within ±7.5% or ±0.75pF, whichever is larger.(HMK) : C＜30pF：Q≧100＋10C/3 C≧30pF：Q≧200 （C：Nominal capacitance） : 500 MΩmin. Appearance Capacitance change Dissipation factor Insulation resistance : No abnormality : Within±15% : 7%max（HMK）, 5%max（QMK, SMK）. : 50MΩμF or 1000MΩ, whichever is smaller. According to JIS 5101-1. Test Methods and Remarks Preconditioning Temperature Duration Class 1 None Maximum operating temperature 1000＋48/－0 hrs Applied voltage Rated voltage×2(HMK) Charge/discharge current Recovery Class 2 Voltage treatment Note 2 Maximum operating temperature 1000＋48/－0 hrs Rated voltage×2(HMK), Rated voltage×1.5（QMK）, Rated voltage×1.2（SMK） 50mA max. 50mA max. 6 to 24hr （Standard condition） Note 3 24±2 hrs （Standard condition） Note 3 Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for 24±2hours. Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and kept at room temperature for 24±2hours. Note3 Standard condition : Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition. Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the "standard condition". ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_mhv_reli_e-E05R01 High Reliability Application Multilayer Ceramic Capacitors are noted separately. Precautions on the use of Multilayer Ceramic Capacitors ■PRECAUTIONS 1. Circuit Design Precautions ◆Verification of operating environment, electrical rating and performance 1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have severe social ramifications. Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from them used in general purpose applications. ◆Operating Voltage （Verification of Rated voltage） 1. The operating voltage for capacitors must always be their rated voltage or less. If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less. For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less. 2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC voltage or a pulse voltage having rapid rise time is used in a circuit. 2. PCB Design Precautions ◆Pattern configurations （Design of Land-patterns） 1. When capacitors are mounted on PCBs, the amount of solder used （size of fillet） can directly affect the capacitor performance. Therefore, the following items must be carefully considered in the design of land patterns: （1）Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider appropriate land-patterns for proper amount of solder. （2）When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by solder-resist. ◆Pattern configurations （Capacitor layout on PCBs） After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes （PCB cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.）. For this reason, land pattern configurations and positions of capacitors shall be carefully considered to minimize stresses. ◆Pattern configurations （Design of Land-patterns） The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts. （1）Recommended land dimensions for typical chip capacitors Land patterns for PCBs ●Multilayer Ceramic Capacitors : Recommended land dimensions Land pattern （unit: mm） Solder-resist Wave-soldering Chip capacitor Type 107 212 316 325 L 1.6 2.0 3.2 3.2 C Size W 0.8 1.25 1.6 2.5 A 0.8 to 1.0 1.0 to 1.4 1.8 to 2.5 1.8 to 2.5 B 0.5 to 0.8 0.8 to 1.5 0.8 to 1.7 0.8 to 1.7 B A B C 0.6 to 0.8 0.9 to 1.2 1.2 to 1.6 1.8 to 2.5 Chip capacitor W Technical considerations L Reflow-soldering Type 021 L 0.25 Size W 0.125 A 0.095～0.135 B 0.085～0.125 C 0.110～0.150 Note：Recommended land 042 0.4 0.2 0.15～0.25 0.15～0.20 0.15～0.30 size might be 063 105 107 212 316 0.6 1.0 1.6 2.0 3.2 0.3 0.5 0.8 1.25 1.6 0.20～0.30 0.45～0.55 0.8～1.0 0.8～1.2 1.8～2.5 0.20～0.30 0.40～0.50 0.6～0.8 0.8～1.2 1.0～1.5 0.25～0.40 0.45～0.55 0.6～0.8 0.9～1.6 1.2～2.0 different according to the allowance of the size of the product. ●LWDC: Recommended land dimensions （unit: mm） Type 105 107 L 0.52 0.8 Size W 1.0 1.6 A 0.18～0.22 0.25～0.3 B 0.2～0.25 0.3～0.4 C 0.9～1.1 1.5～1.7 for reflow-soldering 212 1.25 2.0 0.5～0.7 0.4～0.5 1.9～2.1 325 3.2 2.5 1.8～2.5 1.0～1.5 1.8～3.2 432 4.5 3.2 2.5～3.5 1.5～1.8 2.3～3.5 LWDC W L ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_prec_e-E05R01 （2）Examples of good and bad solder application Item Not recommended Lead wire of component Recommended Solder-resist Mixed mounting of SMD and leaded components Chassis Solder (for grounding) Solder-resist Component placement close to the chassis Electrode pattern Lead wire of component Soldering iron Hand-soldering of leaded components near mounted components Solder-resist Solder-resist Horizontal component placement ◆Pattern configurations （Capacitor layout on PCBs） 1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any stresses from board warp or deflection. Items Not recommended Recommended possible mechanical Place the product at a right angle to the direction of the anticipated mechanical stress. Deflection of board 1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below. E D Perforation C A B Slit Magnitude of stress A＞B＝C＞D＞E 1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB, split methods as well as chip location. 3. Mounting Precautions ◆Adjustment of mounting machine 1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them. 2. Maintenance and inspection of mounting machines shall be conducted periodically. ◆Selection of Adhesives 1. When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the following factors are appropriately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and hardening period. Therefore, please contact us for further information. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_prec_e-E05R01 ◆Adjustment of mounting machine 1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid this, the following points shall be considerable. （1）The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection. （2）The pressure of nozzle shall be adjusted between 1 and 3 N static loads. （3）To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be used on the other side of the PCB. The following diagrams show some typical examples of good and bad pick-up nozzle placement: Item Improper method Proper method Single-sided mounting chipping or cracking supporting pins or back-up pins Double-sided mounting chipping or cracking Technical considerations supporting pins or back-up pins 2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical impact on the capacitors. To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of the pin shall be conducted periodically. ◆Selection of Adhesives Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in stresses on the capacitors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect components. Therefore, the following precautions shall be noted in the application of adhesives. （1）Required adhesive characteristics a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process. b. The adhesive shall have sufficient strength at high temperatures. c. The adhesive shall have good coating and thickness consistency. d. The adhesive shall be used during its prescribed shelf life. e. The adhesive shall harden rapidly. f. The adhesive shall have corrosion resistance. g. The adhesive shall have excellent insulation characteristics. h. The adhesive shall have no emission of toxic gasses and no effect on the human body. （2）The recommended amount of adhesives is as follows; After capacitor are bonded Amount adhesive ［Recommended condition］ a a Figure 212/316 case sizes as examples a 0.3mm min b b 100 to 120μm c Adhesives shall not contact land c c 4. Soldering Precautions ◆Selection of Flux Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use; （1）Flux used shall be less than or equal to 0.1 wt%（ in Cl equivalent） of halogenated content. Flux having a strong acidity content shall not be applied. （2）When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level. （3）When water-soluble flux is used, special care shall be taken to properly clean the boards. ◆Soldering Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions. Sn-Zn solder paste can adversely affect MLCC reliability. Please contact us prior to usage of Sn-Zn solder. Technical considerations ◆Selection of Flux 1-1. When too much halogenated substance（Chlorine, etc.） content is used to activate flux, or highly acidic flux is used, it may lead to corrosion of terminal electrodes or degradation of insulation resistance on the surfaces of the capacitors. 1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted and may adversely affect the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system. 1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high humidity conditions may cause a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning methods and the capability of the machines used shall also be considered carefully when water-soluble flux is used. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_prec_e-E05R01 ◆Soldering ･ Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling. ･ Therefore, the soldering must be conducted with great care so as to prevent malfunction of the components due to excessive thermal shock. ･ Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between the capacitors and solder shall be within 130℃. ･ Cooling : The temperature difference between the capacitors and cleaning process shall not be greater than 100℃. ［Reflow soldering］ 【Recommended conditions for eutectic soldering】 【Recommended condition for Pb-free soldering】 300 300 200 Peak 260℃ Max. Within 10sec. 230℃ Within 10sec. 60sec. 60sec Min. Min. Slow cooling 100 Temperature（℃） Temperature（℃） Preheating 0 200 Slow cooling 100 0 Preheating150℃ Heating above 230℃ 60sec. Min. 40sec. Max. 1/2T～1/3T Capacitor Caution ①The ideal condition is to have solder mass（fillet）controlled to 1/2 to 1/3 of the thickness of a capacitor. ②Because excessive dwell times can adversely affect solderability, soldering duration shall be kept as close to recommended times as possible. soldering for 2 times. ［Wave soldering］ 【Recommended conditions for eutectic soldering】 300 100 Temperature（℃） Temperature（℃） Slow cooling PC board Peak 260℃ Max. Within 10sec. 230～250℃ Within 3sec. 200 T 【Recommended condition for Pb-free soldering】 300 Preheating 120sec. Min. Solder 200 120sec. Min. Preheating 150℃ 100 Slow cooling 0 0 Caution ①Wave soldering must not be applied to capacitors designated as for reflow soldering only. soldering for 1 times. 【Recommended condition for Pb-free soldering】 400 400 300 200 Slow cooling 100 0 Preheating 60sec. Min. Temperature（℃） Temperature（℃） 300 ⊿T Slow cooling 200 Preheating 150℃ Min. 100 0 400 Peak 350℃ Max. Within 3sec. 230～280℃ Within 3sec. 316type or less 200 0 Slow cooling ⊿T Preheating 150℃ Min. 100 60sec. Min. ⊿T ⊿T≦150℃ Peak 280℃ Max. Within 3sec. 300 温度（℃） ［Hand soldering］ 【Recommended conditions for eutectic soldering】 60sec. Min. 325type or more ⊿T ⊿T≦130℃ Caution ①Use a 50W soldering iron with a maximum tip diameter of 1.0 mm. ②The soldering iron shall not directly touch capacitors. soldering for 1 times. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_prec_e-E05R01 5. Cleaning Precautions Technical considerations ◆Cleaning conditions 1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use of the cleaning. （e.g. to remove soldering flux or other materials from the production process.） 2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect capacitor's characteristics. 1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate their outer coating, resulting in a degradation of the capacitor's electrical properties （especially insulation resistance）. 2. Inappropriate cleaning conditions（ insufficient or excessive cleaning） may adversely affect the performance of the capacitors. In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead to the cracking of capacitors or the soldered portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall be carefully checked; Ultrasonic output : 20 W/ℓ or les Ultrasonic frequency : 40 kHz or less Ultrasonic washing period : 5 min. or less 6. Resin coating and mold Precautions 1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while left under normal storage conditions resulting in the deterioration of the capacitor's performance. 2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat may lead to damage or destruction of capacitors. The use of such resins, molding materials etc. is not recommended. 7. Handling Precautions ◆Splitting of PCB 1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board. 2. Board separation shall not be done manually, but by using the appropriate devices. ◆Mechanical considerations Be careful not to subject capacitors to excessive mechanical shocks. （1）If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used. （2）Please be careful that the mounted components do not come in contact with or bump against other boards or components. 8. Storage conditions Precautions ◆Storage 1. To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control temperature and humidity in the storage area. Humidity should especially be kept as low as possible. ・Recommended conditions Ambient temperature : Below 30℃ Humidity : Below 70% RH The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as time passes, so capacitors shall be used within 6 months from the time of delivery. ・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air. 2. The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time, so care shall be taken to design circuits. Even if capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at 150℃ for 1hour. Technical considerations If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and quality loss of taping/packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the above period, please check solderability before using the capacitors. ※RCR-2335B（Safety Application Guide for fixed ceramic capacitors for use in electronic equipment）is published by JEITA. Please check the guide regarding precautions for deflection test, soldering by spot heat, and so on. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . c_mlcc_prec_e-E05R01