FI212P082931-T

Diplexer (for LTE Band ) FI 212P082931-T ■ Electrical Characteristics ■ ShapesL & Dimensions (1) A (2) W (Top) (6) b a Terminal ① Low Band ② GND ③ High Band ④ GND ⑤ Common ⑥ GND (3) (5) (4) e Mark A Marking Directional Input Mark T p c2 c1 (Bottom) Mark L W T a b Dimension 2.00 +/-0.15 1.25 +/-0.15 0.90 +/-0.1 0.30 +/-0.20 0.20 +/-0.15 Mark c1 c2 e p Dimension 0.20 +/-0.15 0.20 +/-0.15 0.35 +/-0.20 0.65 +/-0.20 ■ Actual Data 0 -5 Attenuation [dB] -10 -15 -20 -25 -30 -35 High band -40 Low band -45 Common port RL -50 500 1000 1500 2000 2500 3000 Frequency [M Hz] Notice : All the technical data and specifications are subject to change without prior notice. This product is only intended for use in general communications applications and not intended for applications such as automotive embedded systems where higher safety and reliability are required. Before making final selection, please check product specification. CONFIDENTIAL Apr/24/2014 The Example of a Land Pattern Diplexer (FI 212P Series) Electrodes pattern Resist pattern (aperture size) 50ohm 0.90 0.80 50ohm 0.85 0.78 0.90 0.80 0.65 50ohm 0.35 50ohm Line width be designed to match 50ohm characteristic impedance. Unit : mm Notice : All the technical data and specifications are subject to change without prior notice. This product is only intended for use in general communications applications and not intended for applications such as automotive embedded systems where higher safety and reliability are required. Before making final selection, please check product specification. CONFIDENTIAL Apr/24/2014