GBSFFMAXC

25-Aug-2014 Ver.1.01 TAIYO YUDEN GYSFFMAXC GNSS Module SMD type (without Antenna) GYSFFMAXC Brief Data Report 1/10 TAIYO YUDEN 25-Aug-2014 Ver.1.01 TAIYO YUDEN GYSFFMAXC Document constituent list Control name General Items Absolute maximum ratings Electrical characteristics Electrical characteristics Circuit schematic Outline / Appearance Pin Layout Control No. HD-AG-A121331 HD-AM- A121331 HD-AE- A121331 HD-AE- B121331 HD-MC- A121331 HD-AD- A121331 HD-BA-A121331 Document Page 1/1 1/1 1/1 1/1 1/1 1/1 1/2 - 2/2 Rev. record 07-Aug-2014 Ver.1.0 25-Aug-2014 Ver.1.01 2/10 TAIYO YUDEN 25-Aug-2014 Ver.1.01 TAIYO YUDEN GYSFFMAXC Control No. HD-AG-A121331 (1/1) Control name General Items （１）Scope This specification (“Specification”)applies to the hybrid IC “ GYSFFMAXC ”for use GNSS(GPS+GLONASS) module(“ Product”) manufacture by TAIYO YUDEN Co., Ltd.(“TAIYO YUDEN”) Please be noted that the product code shall be changed in mass production stage. 1)User’s code : GYSFFMAXC (Please state this code to order this product.) 2)Function・Features :  GNSS Module（GPS L1：1575.42MHz） (GLONASS L1: 1598.0625MHz-1605.375MHz)  33ch tracking / 99ch acquisition –GPS/GLONASS/QZSS/SBAS  12 multi-tone  Support multi-GNSS(GPS/GLONASS), QZSS, SBAS（WAAS / EGNOS / MSAS / GAGAN ）  Additional Features:（to be supported with firmware change） Active Interference Canceller（AIC）  AlwaysLocateTM Advanced location awareness technology  EPOTM / HotStillTM orbit prediction  EASYTM self-generation orbit prediction  Logger function support  Interface: UART  Ultra Low Power Consumption  Embedded High-performance electrical parts:LNA, TCXO, RTC, SAW_FL 3)Application : General Consumer Devices 4)Structure: Hybrid IC loaded with silicon semiconductor Propriety of Pb free Packaging by customer（thermal resistance）：Available 5)Outline : 10.0mm(typ)×10.8mm(typ)×2.05mm(max) 46 Pin Leadless chip-carrier 6)Marking : Parts Name & Lot Number 7)Packing ：Tape & Reel（MP） 3/10 TAIYO YUDEN 25-Aug-2014 Ver.1.01 TAIYO YUDEN GYSFFMAXC Control No. HD-AM-A121331 (1/1) Control name Absolute maximum ratings 1.Maximum rating Item Input voltage Symbol VDD3V3 VDD_BACKUP RESET, GIO/EINT, RX MIN -0.3 -0.3 -0.3 TYP MAX 4.3 4.3 Unit V Condition Ta=25degrees-C 3.6 4/10 TAIYO YUDEN 25-Aug-2014 Ver.1.01 TAIYO YUDEN GYSFFMAXC Control No. HD-AE-A121331 Control name Electrical characteristics (1/1) Electrical characteristics 2.Recommendation operating range Item Operating input voltage Supply voltage ripple and spike noise Operating temperature range Storage temperature range Symbol VDD3V3 VDD_BACKUP MIN 3.0 2.0 TYP 3.3 3.3 MAX 4.3 4.3 VDD3V3 40 VDD_BACKUP 40 Unit Condition V mV/p-p Topr -30 25 85 degrees -C Humidity Note1 =40%RH Tstg -30 25 85 degrees -C Humidity Note2 =40%RH Notes: 1. Operating temperature range is set to satisfy products electrical characteristics in the short terms. In terms of product life cycle when it is used in condition of varying from TYP standard in the long term, please refer to the reliability condition. 2. Storage temperature range is the condition for transportation and storage in temporary. DC Specifications The Specification applies for Topr.= 25 degrees-C, voltage=typical No. 1 2 3 4 5 6 Parameter Input Low Voltage Input High Voltage Output Low Voltage Output High Voltage Input Low Voltage Input High Voltage 7 Current MAIN 8 Current BK Condition Rx, GIO/EINT, RESET Symbol VIL18 VIH18 VOL18 VOH18 VIL11 VIH11 Min. -0.30 1.35 1.53 -0.30 0.83 Typ. - Max. 0.45 2.10 0.27 0.27 2.1 VDD3V3 Current Consumption (Average) Icc_Ac - 22 35 Unit Remark V IO=1.8V V IO =1.8V V IO=1.8V V IO =1.8V V IO=1.8V V IO=1.8V Acquisition mA Icc_Tr - 18 28 mA VDD3V3_BACKUP Current Consumption Icc _bk1 - 6 15 Icc _bk2 - 24 200 Tx, GIO/EINT Force ON Tracking Backup uA (VDD3V3= 0V) Other uA mode Note: Please note that these electrical characteristics were measured under Taiyo Yuden evaluation environment. 5/10 TAIYO YUDEN 25-Aug-2014 Ver.1.01 TAIYO YUDEN GYSFFMAXC Control No. HD-AE-B121331 Control name Electrical characteristics (1/1) RF Specifications The Specification applies for Topr.=25 degrees-C No Parameter Symbol Spec 1 2 Frequency Intermediate frequency Fc IF 3 Image Rejection Ratio IRR 30 dB 4 5 VCO Oscillation Frequency Noise Figure 3142.656 1.0 -162 -146 -146 -164 1.0 31 38 1.4 1.4 1.4 MHz dB 6 Sensitivity 1 7 TTFF 1 8 Accuracy 1 Max Unit Typ 1575.4 13.2 Fosc NF Hs1 Ws1 Cs1 Ts1 Ht1 Wt1 Ct1 Ha1 Wa1 Ca1 Min Remark MHz C/A code MHz Hot start sensitivity Warm start sensitivity dBm Cold start sensitivity Tracking sensitivity Hot start @-135dBm Note1 sec Warm start@-135dBm Note2 Cold start @-135dBm Note3 Hot start @-135dBm m Warm start@-135dBm Cold start @-135dBm Note1 Hot start : Re-start in state with Data of Almanac, Ephemeris, and time information. Note2 Warm start : Re-start in state with Data of Almanac. Note3 Cold start : Start when there is not all information. 6/10 TAIYO YUDEN 25-Aug-2014 Ver.1.01 TAIYO YUDEN GYSFFMAXC Control No. HD-MC-A121331 (1/1) Control name Circuit Schematic Module Block Diagram ANT Module Saw LNA MT3333 NMEA Data Host X’tal UART TCXO Power supply 7/10 TAIYO YUDEN 25-Aug-2014 Ver.1.01 TAIYO YUDEN GYSFFMAXC Control No. HD-AD-A121331 (1/1) Control name Outline/Appearance Outline 10.0 +/- 0.2 #1 Marking Unit:mm 2.05Max 10.8 +/- 0.2 C1 GYSFFMAXC Lot No. 21 13 12 22 11 23 44 45 43 46 2 32 1 33 42 34 < Bottom View > 8/10 TAIYO YUDEN 25-Aug-2014 Ver.1.01 TAIYO YUDEN GYSFFMAXC Control No. HD-BA-A121331 Control name Pin Layout (1/2) Pin Layout (Top View) Descriptions No. Pin Name Type Block 1 2 3 4 5 6 7 GND ANT GND VDD3V3 NC NC VDD2V8_OUT Power RF Power Power GND RF GND RF & Digital Digital I I O GND RF_IN Antenna port GND Power Supply voltage 3.3V Never to connect Never to connect Never to connect 8 9 10 11 12 13 GND NC GND NC GND NC Power GND GND GND - - GND Never to connect GND Never to connect GND Never to connect Supply Voltage to RTC LDO. Back-up power supply ＊ at all times “ON” by button battery Never to connect Never to connect RTC 32kHz clock output default no output, controlled by S/W build.(Optional) *Never to connect in case of an unnecessary Power Power Power I/O Description 14 VDD3V3_BACKUP Power Analog I 15 16 17 Debug CLK O NC NC 32KHZ_OUT Main power supply 9/10 TAIYO YUDEN 25-Aug-2014 Ver.1.01 TAIYO YUDEN GYSFFMAXC Control No. HD-BA-A121331 No. Pin Name 18 19 20 NC NC NC 21 GIO_2 22 23 24 Control name Pin Layout (2/2) Type Block I/O Description - - CMOS Digital I/O GND NC NC Power - GND - - 25 UART_RXD CMOS UART I 26 UART_TXD CMOS UART O 27 FORCE_ON CMOS Digital I 28 GIO_6 CMOS Digital I/O 29 GIO_7(1PPS) CMOS Digital I/O 30 GIO_12 (EINT0) CMOS Digital I/O 31 GIO_14 (EINT2) CMOS Digital I/O 32 RESET CMOS Digital I 33 GND Power GND 34 GIO_1 CMOS Digital 35 GIO_0 CMOS GPIO 36 37 38 39 40 41 42 43 44 45 46 GND GND GND GND GND GND GND GND GND GND GND Power Power Power Power Power Power Power Power Power Power Power GND GND GND GND GND GND GND GND GND GND GND Never to connect. Never to connect. Never to connect. General purpose interface pin. Internal 75kΩpull up *Never to connect in case of an unnecessary. GND Never to connect. Never to connect. Serial data input for the UART Interface. Internal 75kΩpull up. Serial data output for the UART Interface. Internal 75kΩpull up. In backup mode, logic high to force power on this module. General purpose interface pin. Internal 75kΩpull down *Never to connect in case of an unnecessary. 1pps signal output (Default: Pulse width:100msec, Output timing: 3DFix) External Interrupt, General purpose interface pin Internal 75kΩpull down *Never to connect in case of an unnecessary. External Interrupt, General purpose interface pin Internal 75kΩpull up *Never to connect in case of an unnecessary. RESET terminal, active LOW Internal 75kΩpull up GND General purpose interface pin. I/O Internal 75kΩpull up *Never to connect in case of an unnecessary. General purpose interface pin. I/O Internal 75kΩpull up *Never to connect in case of an unnecessary. GND GND GND GND GND GND GND GND GND GND GND 10/10 TAIYO YUDEN